Boyd Welding Fuel Tanks: Limited Time Group Buy

[ARCTICFRONTIER]

Got mine today. Pretty quick considering it was a group buy, on a product that needs to be made and I live in Canada! Looks great!

[NvrDun71]

I'm way late to the party but any chance to still get one of these at Black Friday pricing? Needing one for a 71' center fill add on option

[Pro Performance]

Originally Posted by NvrDun71

I'm way late to the party but any chance to still get one of these at Black Friday pricing? Needing one for a 71' center fill add on option

Unfortunately this sale has passed, and can't do the Black Friday pricing. Be glad to help with getting you one though.

[Speedracer39]

I'm also interested------
Posted via Mobile Device

[ecgate]

Can you get me a price shipped on a 67-72 efi fuel tank?

[joesscamaro]

If Im going with an LS conversion in my '65...do I need the 0-90 OHMS sending unit? I'm pretty sure the older SBC are 0-90...and assuming the LS1 would be the same? Can I get a quote for an efi tank for a 65 with an LS1?

[Pro Performance]

Originally Posted by joesscamaro

If Im going with an LS conversion in my '65...do I need the 0-90 OHMS sending unit? I'm pretty sure the older SBC are 0-90...and assuming the LS1 would be the same? Can I get a quote for an efi tank for a 65 with an LS1?

It all depends on the gauges you plan on using, not so much the engine. If you plan on running stock gauges, then a 0-30 will be ideal. If planning to use Dakota or most other aftermarket gauges, then I would go with 0-90 ohm.

[Speedracer39]

Can I get a price on 67-72 STANDARD (BED FILL) NON-EFI

[Pro Performance]

Originally Posted by Speedracer39

Can I get a price on 67-72 STANDARD (BED FILL) NON-EFI

The carb tanks runs $349, plus whichever options you choose.

http://www.azproperformance.com/Boyd...ill-14001.html

[68 SWB]

So nice!

[Sweeet67]

I want to thank Travis publicly. I was sent the wrong tank on accident, he immediately said no prob, hooked me up with a return label and is having a new tank sent out. Great customer service guys! Thanks

[ARCTICFRONTIER]

Got it test fit today. Looks great! Thanks for a good deal

[69short]

Can you quote me an efi tank for a 69 c10. Efi, rollover vent, 0-90ohm, center fill but angled 45* to the rear (and also a separate quote with the normal center fill) both with black powder coat.

[Pro Performance]

Good talking with you and thanks for the order.

[69short]

Originally Posted by Pro Performance

Good talking with you and thanks for the order.

Thanks again. Will Boyds send out a shipping notification when it ships? I only ask because I will be in Italy from the 16th to the 1st.

[Sik66]

Soooo wish there was a cheaper way to get these to Australia!....id be all over getting one ASAP!...

[coopdog]

I defiantly recommend the tank, I installed mine about a month ago, prior to install I polished the tank with some metal polished and got it to look just about like chrome, defiantly a nice piece: metal:

[Pro Performance]

Originally Posted by 69short

Thanks again. Will Boyds send out a shipping notification when it ships? I only ask because I will be in Italy from the 16th to the 1st.

Yep, we will send tracking once it ships.

Originally Posted by Sik66

Soooo wish there was a cheaper way to get these to Australia!....id be all over getting one ASAP!...

If you'd like, tens us your full address to: sales@azproperformance.com and can get you a shipping quote.

Originally Posted by coopdog

I defiantly recommend the tank, I installed mine about a month ago, prior to install I polished the tank with some metal polished and got it to look just about like chrome, defiantly a nice piece: metal:

Nice!

[Sik66]

If you'd like, tens us your full address to: sales@azproperformance.com and can get you a shipping quote.



Pretty sure have done before off eBay......shipping cost was more then cost of tank!!😳

[xmitsu10]

Can you confirm the Boyd tank will fit a leaf suspension short bed? Also, does the rear cross member need to be moved back to install the tank?

Could I get a quote for a Boyd EFI/Side Fill with:
1) sending unit
2) mounting kit
3) roll over vent
4) powder coated black

Shipped to 03809.

Thanks.

[Speedracer39]

I also have a 72 c10 shortbed leaf spring with wood floor and was wondering if and any mods were needed to install.

[Pro Performance]

Originally Posted by Sik66

If you'd like, tens us your full address to: sales@azproperformance.com and can get you a shipping quote.



Pretty sure have done before off eBay......shipping cost was more then cost of tank!!��

That does happen as it gets pricey doing International shipping. We just charge what FedEx charges us.

Originally Posted by xmitsu10

Can you confirm the Boyd tank will fit a leaf suspension short bed? Also, does the rear cross member need to be moved back to install the tank?

Could I get a quote for a Boyd EFI/Side Fill with:
1) sending unit
2) mounting kit
3) roll over vent
4) powder coated black

Shipped to 03809.

Thanks.

Got your PM and PM returned.

Originally Posted by Speedracer39

I also have a 72 c10 shortbed leaf spring with wood floor and was wondering if and any mods were needed to install.

No mods needed, as if I remember right, the rear crossmembers are in the same location. The tank is 19" from front to back.

[oldtrux]

i have an existing boyds tank in my 66 (non efi) i am interested in flush mount bed fill kit part 27042.my existing tank has twist on cap not threaded.will this fill kit work with my tank? thanks dan

[Pro Performance]

Originally Posted by oldtrux

i have an existing boyds tank in my 66 (non efi) i am interested in flush mount bed fill kit part 27042.my existing tank has twist on cap not threaded.will this fill kit work with my tank? thanks dan

Hey Dan. Yep, sure will work, and just have to select "Using w/ Existing Boyd Tank" under the options.

http://www.azproperformance.com/Boyd...Kit-27042.html

Travis

[MBrown]

Does Boyd's offer these for a '59 GMC with a side fill option? Also a pump suitable for LS engine and shipping to zip 30710? Quote would be great.

Mark