66 Pro Street Build (Domeringer) - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66chevy43 · 01-08-2017, 03:14 PM

WOW! You have some MAD fabrication skills! That looks BAD A$$$$ and looking forward to seeing it lighting up the rear tires.

**Gary V** · 01-08-2017, 08:25 PM

Quote:

Originally Posted by 66chevy43

WOW! You have some MAD fabrication skills! That looks BAD A$$$$ and looking forward to seeing it lighting up the rear tires.

Thanks bud!

Well as mentioned... still busy as hell but here's some progress. Early on I was talked into running a set of 315 Mickey Thompson tires. Original plan was big tire! Reminder Gary... don't change your plans! Had to shorten the rear end again to go big tire.

Ran the two forward down bars and started mocking up the radiator mount. Also working on fabbing up two side tanks... one for methanol or race fuel and the other for pump gas. Here's some pics

aggie91 · 01-09-2017, 10:23 AM

WooHoo!

**66ChevyMax** · 01-09-2017, 02:01 PM

Just amazing work, looks so cool just sitting there, well done.

tinydb84 · 01-09-2017, 05:30 PM

Man that is cool.

61_FL_Apache · 01-09-2017, 07:05 PM

Its nice to see your using a 2nd tape measure for back up!

grunt5510 · 01-11-2017, 09:59 AM

How far back on on the from the front of the frame did you cut it? How did you decide to cut there? I'm currently working on a relatively similar build not nearly as stout but I'm replacing the frame rails and back halfing the truck but I'm leaving the front stub but changing the cross member and suspension.

Frankpc3 · 01-12-2017, 12:50 AM

Great Build ! I am trying to build 52 chevy truck with a C4 running gear This helps a lot to see another build thanks

Keep up the Great Work!!!

**Gary V** · 01-29-2017, 06:13 PM

Quote:

Originally Posted by aggie91

WooHoo!

Thank you karl!

Quote:

Originally Posted by 66ChevyMax

Just amazing work, looks so cool just sitting there, well done.

Thanks Craig... Your truck is fantastic!

Quote:

Originally Posted by tinydb84

Man that is cool.

Hi David... Thank you much!

Quote:

Originally Posted by 61_FL_Apache

Its nice to see your using a 2nd tape measure for back up!

Hi Steve, LOL it's odd to see 2 together in the pic.... can never seem to find one.

Quote:

Originally Posted by grunt5510

How far back on on the from the front of the frame did you cut it? How did you decide to cut there? I'm currently working on a relatively similar build not nearly as stout but I'm replacing the frame rails and back halfing the truck but I'm leaving the front stub but changing the cross member and suspension.

Hi Grunt, I cut the frame between the front cab mount holes. The frame straightens out there and if you use the mounts you can sandwich the frame cut for more strength. Here's a pic

Quote:

Originally Posted by Frankpc3

Great Build ! I am trying to build 52 chevy truck with a C4 running gear This helps a lot to see another build thanks

Keep up the Great Work!!!

Thank you Frank! If you post a build thread send me a link... I'd like to take a look see!

Ok workin on it! As I mentioned the truck will have two tanks one for high octane and the other for C16 race fuel. Started welding everything together... here's some pics of the layout. Will post details of innards next week.

Modges'66 · 01-30-2017, 09:16 PM

Hmmm, some pretty nice welds on the aluminum tank!
Still watchin' closely! LOL!

mud.man.rj · 02-03-2017, 02:42 PM

Beauty...every time I look back in so much better.
Mudman.

**Gary V** · 02-12-2017, 05:23 PM

Quote:

Originally Posted by Modges'66

Hmmm, some pretty nice welds on the aluminum tank!
Still watchin' closely! LOL!

Quote:

Originally Posted by mud.man.rj

Beauty...every time I look back in so much better.
Mudman.

Thanks guys!

Figure'd some of you might like to see how the tanks are fabbed, so I'm going to get a little detailed on how the tanks and fuel system are designed and put together.

The left tank is going to be mainly used for street use. Premium gas and maybe some E85 if we push the tune. Here's the in tank pump I'll use for this system.

The right side tank will be ready for high HP. Race fuels only! It will contain another in tank pump that will only transfer the fuel to a surge tank up front that will contain 2 or three additional pumps to supply fuel bigly

here's an excellent example for reference... RADIUM

I'm going to machine and fab all of components and make my own version... more on that later.

Made a lot of progress this week! Bent up some tube and attached them to the frame for mounting the tanks and started finish welding the tanks. Here's some pics

SCOTI · 02-13-2017, 07:04 PM

Pretty cool stuff going on every time I check your updates...Thanks for sharing!

**Gary V** · 02-15-2017, 07:26 PM

Quote:

Originally Posted by SCOTI

Pretty cool stuff going on every time I check your updates...Thanks for sharing!

Hi Scoti... Thank you!

Working on the layout for the fuel pump hangers. Machined some brackets for the pumps.

aggie91 · 02-16-2017, 10:55 AM

Those are nice! Sure beats a hose clamp...lol

**Gary V** · 02-18-2017, 05:07 PM

Quote:

Originally Posted by aggie91

Those are nice! Sure beats a hose clamp...lol

Thanks Karl!

Ok.... Machined and welded some pump hanger flanges

61_FL_Apache · 02-18-2017, 08:37 PM

Mad fab skills as always Gary!!

**Gary V** · 02-22-2017, 06:59 PM

Quote:

Originally Posted by 61_FL_Apache

Mad fab skills as always Gary!!

Thank you Steve!

Got the tank pump hat designed... off to the machine

TOP

BOTTOM

mud.man.rj · 02-22-2017, 07:37 PM

This build is so off the charts, very cool, keep at it.
Mudman.

Grizz1963 · 02-24-2017, 03:17 AM

Gary, I have nothing to add except massive admiration.

Your build is in such a different world.

Tanks look lovely.

**Gary V** · 02-25-2017, 06:09 AM

Quote:

Originally Posted by mud.man.rj

This build is so off the charts, very cool, keep at it.
Mudman.

Quote:

Originally Posted by Grizz1963

Gary, I have nothing to add except massive admiration.

Your build is in such a different world.

Tanks look lovely.

Thank you very much!

Well... up with the birds! Here's some update pics of the fuel hat design. Laid out the o'ring sealed electric insulators and inserted one of them into the hat, also added the tank seal o'ring groove and lightened the hat a bit more... good to go!

Isaiah · 03-14-2017, 12:04 AM

Glad to see this truck still going. Sorry for all the annoying questions in the past, I have since done my research and figured things out. I can't wait to see this done. I don't know if a 71 El Camino counts as a truck but I'm gonna start my build thread here thank you for the "truck" inspiration it kept me from going the typical Cameron drag car kind of build.

Isaiah · 03-14-2017, 07:29 PM

Quote:

Originally Posted by Isaiah

Glad to see this truck still going. Sorry for all the annoying questions in the past, I have since done my research and figured things out. I can't wait to see this done. I don't know if a 71 El Camino counts as a truck but I'm gonna start my build thread here thank you for the "truck" inspiration it kept me from going the typical Cameron drag car kind of build.

Meant to say Camaro

**Gary V** · 03-14-2017, 08:29 PM

Quote:

Originally Posted by Isaiah

Glad to see this truck still going. Sorry for all the annoying questions in the past, I have since done my research and figured things out. I can't wait to see this done. I don't know if a 71 El Camino counts as a truck but I'm gonna start my build thread here thank you for the "truck" inspiration it kept me from going the typical Cameron drag car kind of build.

Hi Isaiah, Thank you! El Camino's are trucks in my eyes... what could be cooler than a car and a pickup in one. I may have a go at one someday. Your questions are not annoying and I look forward to following your build... please be sure to give me the heads up when you get started with the thread.

Have been very busy in my spare time, programming and machining parts for this fuel pump setup. Another weekend of machining and I'll post up some pics...

Isaiah · 03-14-2017, 08:56 PM

Quote:

Originally Posted by Gary V

Hi Isaiah, Thank you! El Camino's are trucks in my eyes... what could be cooler than a car and a pickup in one. I may have a go at one someday. Your questions are not annoying and I look forward to following your build... please be sure to give me the heads up when you get started with the thread.

Have been very busy in my spare time, programming and machining parts for this fuel pump setup. Another weekend of machining and I'll post up some pics...

Will do, so far all I have is about 230 feet of chromoly and a 71 El Camino with a 69 chevelle front clip from vfn once I get some space to start slicing and dicing I'll get a thread going and some progress going.

01-08-2017, 03:14 PM	#226
66chevy43 Registered User Join Date: Sep 2013 Location: Willamette Valley Oregon Posts: 110	Re: 66 Pro Street Build (Domeringer) WOW! You have some MAD fabrication skills! That looks BAD A$$$$ and looking forward to seeing it lighting up the rear tires.

01-09-2017, 10:23 AM	#228
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 66 Pro Street Build (Domeringer) WooHoo! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-09-2017, 02:01 PM	#229
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: 66 Pro Street Build (Domeringer) Just amazing work, looks so cool just sitting there, well done. __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

01-09-2017, 05:30 PM	#230
tinydb84 Registered User Join Date: Jul 2009 Location: San Jose Ca Posts: 2,871	Re: 66 Pro Street Build (Domeringer) Man that is cool. __________________ David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy

01-09-2017, 07:05 PM	#231
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: 66 Pro Street Build (Domeringer) Its nice to see your using a 2nd tape measure for back up! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

01-11-2017, 09:59 AM	#232
grunt5510 Registered User Join Date: Mar 2016 Location: Lincoln, Nebraska Posts: 2	Re: 66 Pro Street Build (Domeringer) How far back on on the from the front of the frame did you cut it? How did you decide to cut there? I'm currently working on a relatively similar build not nearly as stout but I'm replacing the frame rails and back halfing the truck but I'm leaving the front stub but changing the cross member and suspension.

01-12-2017, 12:50 AM	#233
Frankpc3 Registered User Join Date: Jan 2017 Location: Clovis, Ca Posts: 2	Re: 66 Pro Street Build (Domeringer) Great Build ! I am trying to build 52 chevy truck with a C4 running gear This helps a lot to see another build thanks Keep up the Great Work!!!

01-30-2017, 09:16 PM	#235
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: 66 Pro Street Build (Domeringer) Hmmm, some pretty nice welds on the aluminum tank! Still watchin' closely! LOL! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

02-03-2017, 02:42 PM	#236
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 66 Pro Street Build (Domeringer) Beauty...every time I look back in so much better. Mudman. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

02-13-2017, 07:04 PM	#238
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,041	Re: 66 Pro Street Build (Domeringer) Pretty cool stuff going on every time I check your updates...Thanks for sharing! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-16-2017, 10:55 AM	#240
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 66 Pro Street Build (Domeringer) Those are nice! Sure beats a hose clamp...lol __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-18-2017, 08:37 PM	#242
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: 66 Pro Street Build (Domeringer) Mad fab skills as always Gary!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

02-22-2017, 07:37 PM	#244
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 66 Pro Street Build (Domeringer) This build is so off the charts, very cool, keep at it. Mudman. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

02-24-2017, 03:17 AM	#245
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,565	Re: 66 Pro Street Build (Domeringer) Gary, I have nothing to add except massive admiration. Your build is in such a different world. Tanks look lovely. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

03-14-2017, 12:04 AM	#247
Isaiah Registered User Join Date: Jun 2016 Location: Mt Vernon, Wa Posts: 14	Re: 66 Pro Street Build (Domeringer) Glad to see this truck still going. Sorry for all the annoying questions in the past, I have since done my research and figured things out. I can't wait to see this done. I don't know if a 71 El Camino counts as a truck but I'm gonna start my build thread here thank you for the "truck" inspiration it kept me from going the typical Cameron drag car kind of build.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.