TX WTB: a/c center dash cut like THIS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jocko** · 01-26-2017, 09:53 PM

Hi, am looking for a dash center section cut from a truck being parted kinda sorta like this one (hope you don't mind I borrowed an old pic of your tkorinek) - except (!) from an a/c truck. Showing this one because it's about the size I'm looking for - haven't found any a/c dash cuts in the aftermarket. Could make one by cutting out the hole, but wanted to see if any truck parters might have one. Thanks!

**heehawracing** · 01-26-2017, 10:00 PM

i have one 125.00 shipped

**68bowtie** · 01-26-2017, 10:32 PM

i have one i can cut where you like:
http://67-72chevytrucks.com/vboard/s...d.php?t=728187

**jocko** · 01-26-2017, 11:02 PM

hee haw and 68, thank you both. Saw your pic 68 - interested. heehaw, can you post a front n back pic?

**atog** · 01-26-2017, 11:08 PM

I got this one

**atog** · 01-26-2017, 11:12 PM

Back side

**richard2717** · 01-27-2017, 09:28 AM

Do you need a specific color or will you be painting anyway? I have a couple if the others don't work out. One is dark green the other I believe was Ochre. Will post pics tonight if needed

**jocko** · 01-27-2017, 11:19 AM

will be painting, however, interested in the dark olive one. Thanks for the input gents, waiting on Richard's and hee haw's pics and will decide from there.

**richard2717** · 01-27-2017, 04:18 PM

Jocko
This is the one I have. I would want you to pm me your address so I could get accurate shipping for it. The lighter and ignition are no longer in it. I would do $100 plus shipping for the whole dash. I hate to cut it since it is so nice but I will. It would be same price just save some on shipping

Richard

.

**jocko** · 01-27-2017, 05:19 PM

Richard, I believe this one has the least rust on the back side, and the backside would also match my dash - not that that really matters. I'll take it and only need the section depicted below. Will pm address, etc.

Thanks heehaw, 68bowtie, and atog for all the responses. I think I'll go with this one though, really appreciate everyone's help. Jocko

**richard2717** · 01-27-2017, 05:30 PM

Quote:

Originally Posted by jocko

Richard, I believe this one has the least rust on the back side, and the backside would also match my dash - not that that really matters. I'll take it and only need the section depicted below. Will pm address, etc.

Thanks heehaw, 68bowtie, and atog for all the responses. I think I'll go with this one though, really appreciate everyone's help. Jocko

Correct, it has very minor surface rust. the whitish smudged area is actually a mud dobber nest I knocked off of it so it will clean up as well. I will get quote and pm you the total.

Thanks
Richard

**heehawracing** · 01-27-2017, 06:53 PM

sorry i didnt get a picture on here today i was gone all day but the green one is in better shape than mine
thanks

**jocko** · 01-27-2017, 07:40 PM

Quote:

Originally Posted by heehawracing

sorry i didnt get a picture on here today i was gone all day but the green one is in better shape than mine
thanks

no problem at all, thanks. Once I saw it, I decided to jump. Thanks for letting me know.

tommys72 · 01-27-2017, 10:04 PM

Good buy on the green one there jocko

**jocko** · 01-27-2017, 11:33 PM

thanks Tommy - this place is amazing. How many places in the world could you say "hey, I need this weird chunk of sheet metal, and could you cut it to the size I want and ship it to me?" and have 4 offers to help before the night is over.

tommys72 · 01-28-2017, 11:08 AM

Quote:

Originally Posted by jocko

thanks Tommy - this place is amazing. How many places in the world could you say "hey, I need this weird chunk of sheet metal, and could you cut it to the size I want and ship it to me?" and have 4 offers to help before the night is over.

I thought that too yesterday when i looked at this thread. This thread also made me realize the repair panels that are sold are not setup for ac trucks. So i will be making a thread like this one when i get to fixing my spare cab.

Color match is good too. If the trucks stay green, you could weld it in behind the gauge cluster and glove box and not even paint the patch panel.

01-26-2017, 09:53 PM	#1
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	WTB: a/c center dash cut like THIS Hi, am looking for a dash center section cut from a truck being parted kinda sorta like this one (hope you don't mind I borrowed an old pic of your tkorinek) - except (!) from an a/c truck. Showing this one because it's about the size I'm looking for - haven't found any a/c dash cuts in the aftermarket. Could make one by cutting out the hole, but wanted to see if any truck parters might have one. Thanks! Attached Images

01-26-2017, 10:00 PM	#2
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: WTB: a/c center dash cut like THIS i have one 125.00 shipped

01-26-2017, 10:32 PM	#3
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,739	Re: WTB: a/c center dash cut like THIS i have one i can cut where you like: http://67-72chevytrucks.com/vboard/s...d.php?t=728187 __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

01-26-2017, 11:02 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: WTB: a/c center dash cut like THIS hee haw and 68, thank you both. Saw your pic 68 - interested. heehaw, can you post a front n back pic? Last edited by jocko; 01-26-2017 at 11:08 PM.

01-26-2017, 11:08 PM	#5
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: WTB: a/c center dash cut like THIS I got this one Attached Images

01-26-2017, 11:12 PM	#6
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: WTB: a/c center dash cut like THIS Back side Attached Images

01-27-2017, 09:28 AM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: WTB: a/c center dash cut like THIS Do you need a specific color or will you be painting anyway? I have a couple if the others don't work out. One is dark green the other I believe was Ochre. Will post pics tonight if needed __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-27-2017, 11:19 AM	#8
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: WTB: a/c center dash cut like THIS will be painting, however, interested in the dark olive one. Thanks for the input gents, waiting on Richard's and hee haw's pics and will decide from there.

01-27-2017, 04:18 PM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,091	Re: WTB: a/c center dash cut like THIS Jocko This is the one I have. I would want you to pm me your address so I could get accurate shipping for it. The lighter and ignition are no longer in it. I would do $100 plus shipping for the whole dash. I hate to cut it since it is so nice but I will. It would be same price just save some on shipping Richard . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-27-2017, 05:19 PM	#10
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: WTB: a/c center dash cut like THIS Richard, I believe this one has the least rust on the back side, and the backside would also match my dash - not that that really matters. I'll take it and only need the section depicted below. Will pm address, etc. Thanks heehaw, 68bowtie, and atog for all the responses. I think I'll go with this one though, really appreciate everyone's help. Jocko Attached Images

01-27-2017, 06:53 PM	#12
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: WTB: a/c center dash cut like THIS sorry i didnt get a picture on here today i was gone all day but the green one is in better shape than mine thanks

01-27-2017, 10:04 PM	#14
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: WTB: a/c center dash cut like THIS Good buy on the green one there jocko __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son

01-27-2017, 11:33 PM	#15
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: WTB: a/c center dash cut like THIS thanks Tommy - this place is amazing. How many places in the world could you say "hey, I need this weird chunk of sheet metal, and could you cut it to the size I want and ship it to me?" and have 4 offers to help before the night is over.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.