|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-18-2016, 06:46 PM
|
#1 |
|
Registered User
 
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
|
1972 C30 Dually Eaton Rear brake backing plates
i removed these from my 1972 c30 when i changed over to a square body rear brake. these are dirty and grimey but still solid. $20 plus the ride
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project |
|
|
|
01-26-2017, 10:20 PM
|
#2 |
|
Registered User
Join Date: Jan 2017
Location: Stockton,Ca
Posts: 2
|
Re: 1972 C30 Dually Eaton Rear brake backing plates
Looking for rear drums, 13.250 for 72 chevy dually c30?
|
|
|
|
|
01-26-2017, 10:54 PM
|
#3 | |
|
Registered User
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
|
Re: 1972 C30 Dually Eaton Rear brake backing plates
Quote:
I swapped the entire brake setup from a early 80s square body 1 ton dually onto my 72. Any GM 14 bolt dually can be used as a donor. use all the brake parts from the square body, and the bearing carriers/spindles and axle shafts from your 72. I recomend the swap, parts are much easier to find!!
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
