Stock Bolt Fitting - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Flmarine71 · 02-05-2017, 12:20 PM

78 k5 Blazer 2wd

Does this pic look like the stock front shock mount stud/bolt? I am replacing shocks with Napa Response #94021 but the bolt does not fit through the top rubber bushing. The old shocks (Monroe Magnum 6817- white shock in pic) have the larger hole. Napa pulled the 94021 as a match for my truck. Thanks.

**kwmech** · 02-05-2017, 03:43 PM

The rear shocks usually have the metal sleeve. OR remove the sleeve. Did they interchange the shock numbers?

Flmarine71 · 02-05-2017, 04:17 PM

Quote:

Originally Posted by kwmech

The rear shocks usually have the metal sleeve. OR remove the sleeve. Did they interchange the shock numbers?

I looked online on Napa and it appears the only option they have for k5 blazer is for 4wd- part #94021. Mine is 2wd. They have a "C10 Blazer" category which does show a different shock (along with new bolt hardware which mine didn't come with). I am guessing I bought the 4wd front shocks?

02-05-2017, 12:20 PM	#1
Flmarine71 Registered User Join Date: May 2016 Location: Debary, FL Posts: 46	Stock Bolt Fitting 78 k5 Blazer 2wd Does this pic look like the stock front shock mount stud/bolt? I am replacing shocks with Napa Response #94021 but the bolt does not fit through the top rubber bushing. The old shocks (Monroe Magnum 6817- white shock in pic) have the larger hole. Napa pulled the 94021 as a match for my truck. Thanks. Attached Images

02-05-2017, 03:43 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: Stock Bolt Fitting The rear shocks usually have the metal sleeve. OR remove the sleeve. Did they interchange the shock numbers?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.