![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jul 2007
Location: Fall River California
Posts: 2,026
|
Replacing upper and lower ball joints in my 72 Gmc K1500
Noticed a clunking sound on the front passenger side of my 72 K1500, found the ball joints are loose. Will I need a press or special tools to pull and replace them?
This one of the few things I've never had to deal with. Thanks!
__________________
http://smg.photobucket.com/albums/v655/aaronhero/ |
![]() |
![]() |
![]() |
#2 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,940
|
Re: Replacing upper and lower ball joints in my 72 Gmc K1500
Yup... you will need a ball joint press. Most auto parts stores will rent one out so you don't have to drop the $125 bucks to buy one.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2007
Location: Fall River California
Posts: 2,026
|
Re: Replacing upper and lower ball joints in my 72 Gmc K1500
Thanks, was hoping I could find away around using a press but it seems I'll have to buy one or make one, local parts store doesn't loan or rent tools.
Thanks again!
__________________
http://smg.photobucket.com/albums/v655/aaronhero/ |
![]() |
![]() |
![]() |
#4 |
Active Member
![]() Join Date: May 2016
Location: Madison WI
Posts: 146
|
Re: Replacing upper and lower ball joints in my 72 Gmc K1500
I just ordered a cheap Chinese version off Ebay for $40, maybe will work long enough to do the job
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2007
Location: Fall River California
Posts: 2,026
|
Re: Replacing upper and lower ball joints in my 72 Gmc K1500
Just found a press on Amazon for about $50, I'll be replacing all four of the ball joints so I doubt I'll need it again, have a friend who is an aspiring mechanic so I'll sell to him for half price, and the right to use it if I ever need it again!
__________________
http://smg.photobucket.com/albums/v655/aaronhero/ |
![]() |
![]() |
![]() |
#6 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,940
|
Re: Replacing upper and lower ball joints in my 72 Gmc K1500
When I did the lower ball joints on my 1972 C15 I rented a tool from my local auto parts house. It was a pretty stout rig and I had to pull on that thing with everything I had to get the old joint out and the new one in. Glad it wasn't a cheapy because it was flexing a tad... but I got them in.
Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
|
||
![]() |
![]() |
![]() |
Bookmarks |
|
|