NE 67/68 COMPLETE PART OUT *Patch Panels* Cab Lights!!

[jmader]

Good to see another GI guy on here! How is the seat?

[Bueno 68C-10]

Originally Posted by too much stuff

Is there any issues at all with the dash pad? Corners curling up or cracks? Is it still fairly soft?

It looked nice, but pressed to see how soft it was and it cracked... Sorry. ...so the choke delete $10 plus $5 shipping sound good?

[Bueno 68C-10]

Originally Posted by jmader

Good to see another GI guy on here! How is the seat?

The seat covers are decent maybe one or two rips, but the cushions have had some rodent tunneling. I'll make ya a deal on it.

[Bueno 68C-10]

Originally Posted by 70/JJ

What kind of shape are the outside door handles in?
Building patina truck so don't need to be perfect.

I've got a pretty nice set! $30 plus $15 to ship sound fair?

[70/JJ]

Sounds good to me send me PM and I'll send you usps money order if that good for you??

[Bueno 68C-10]

70/JJ pm sent

ScottH pm sent

StormBear pm sent

[cr1hotrod]

Is this a 68 cab? I'm guessing it is by the ignition spacer pictured earlier. Can you verify? I need the center dash section for a 67, but a 68 won't work. I would also like price and shipping(80504) for brake pedal assy all the way to the booster bracket. I'll need pictures of the pin location on the pedal to make sure it's a power pedal. Let me know...Thanks

[jmader]

Originally Posted by Bueno 68C-10

The seat covers are decent maybe one or two rips, but the cushions have had some rodent tunneling. I'll make ya a deal on it.

PM sent

[too much stuff]

Originally Posted by Bueno 68C-10

It looked nice, but pressed to see how soft it was and it cracked... Sorry. ...so the choke delete $10 plus $5 shipping sound good?

That will work for the choke delete. Send me your paypal.

[Bueno 68C-10]

Originally Posted by too much stuff

That will work for the choke delete. Send me your paypal.

Pm Sent

[Bueno 68C-10]

Originally Posted by cr1hotrod

Is this a 68 cab? I'm guessing it is by the ignition spacer pictured earlier. Can you verify? I need the center dash section for a 67, but a 68 won't work. I would also like price and shipping(80504) for brake pedal assy all the way to the booster bracket. I'll need pictures of the pin location on the pedal to make sure it's a power pedal. Let me know...Thanks

Ok I will go pull that off the truck and take some pictures of it.

[Bueno 68C-10]

Originally Posted by cr1hotrod

Is this a 68 cab? I'm guessing it is by the ignition spacer pictured earlier. Can you verify? I need the center dash section for a 67, but a 68 won't work. I would also like price and shipping(80504) for brake pedal assy all the way to the booster bracket. I'll need pictures of the pin location on the pedal to make sure it's a power pedal. Let me know...Thanks

It is a 68 cab with a 67 front Clip. Here are the pictures of the brackets.

[Bueno 68C-10]

Originally Posted by Hunter67stepside

I will take them for 40 pending pictures. Tomorrow is fine. Also is the drivers side vent window assembly in ok shape. I see where you listed the glass but I am interested in the entire vent window assembly with glass. If so let me know price and we can combine shipping. Thanks a lot

My phone broke today, but I will try to get the seat belt pictures up tomorrow.

[Bueno 68C-10]

Originally Posted by hounddogs!

If you're cutting the cab, how's the floor? Specifically, at the kick panels and the outrigger supports going outward towards the rockers.


Loren

I looked today and the floors and bottom of the cab are gone. The good panels are along the roof and drip rails.

[m7vasque]

Hi do you have a center link available for a 67-70 c10 half ton? Shipped to 92024

[Bueno 68C-10]

Originally Posted by m7vasque

Hi do you have a center link available for a 67-70 c10 half ton? Shipped to 92024

I only have the one off of this truck and this truck is a 3/4 Ton... I'm not sure if they would be the same or not. I can compare the one off of this truck to my half ton.

[68 c20 cst]

You still have Yankee lights?

[Bueno 68C-10]

Originally Posted by 68 c20 cst

You still have Yankee lights?

sorry they are I sold. I will update the parts list.

[Bueno 68C-10]

Originally Posted by Hunter67stepside

I will take them for 40 pending pictures. Tomorrow is fine. Also is the drivers side vent window assembly in ok shape. I see where you listed the glass but I am interested in the entire vent window assembly with glass. If so let me know price and we can combine shipping. Thanks a lot

Here is the picture sorry took me so long to get my phone fixed.

[Hunter67stepside]

Im glad I asked for pick. I have a 67 and was expecting the seatbelts buckle style to be the aircraft style with Bowtie emblem...so these will not work for me.

I guess we are left with the drivers side vent frame. Can you shoot me a price on that delivered to Nashville 37027? Thanks

[master 1969 c10]

How much for the cut out of the radio ashtray in the heater control patch panel neeting it for a pattern. Ship to 45690 thanks Doug

[crossjo]

I need the drivers side engine perch/stand for a small block V8. Thanks.

[Bueno 68C-10]

Originally Posted by Hunter67stepside

Im glad I asked for pick. I have a 67 and was expecting the seatbelts buckle style to be the aircraft style with Bowtie emblem...so these will not work for me.

I guess we are left with the drivers side vent frame. Can you shoot me a price on that delivered to Nashville 37027? Thanks

Pm sent

[Bueno 68C-10]

Originally Posted by master 1969 c10

How much for the cut out of the radio ashtray in the heater control patch panel neeting it for a pattern. Ship to 45690 thanks Doug

Do you want the ashtray and the heater controls left in it?

[Bueno 68C-10]

Originally Posted by crossjo

I need the drivers side engine perch/stand for a small block V8. Thanks.

I've got one $15 plus the ride.