Has anyone used the Tanks Inc Universal Tanks in 64-66? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bbluma · 03-30-2017, 02:07 PM

Just trying to see if the Tanks Inc Universal tanks, like this one (http://www.tanksinc.com/index.cfm/pa...rod/prd173.htm) would fit for a 66. From what i have read it will, but just want to verify, and see if anyone has any pictures of the install. Thanks.

**Chevy Fleetside** · 03-30-2017, 06:13 PM

They do fit. I think I had to trim my frame about 1/4" but that was about it. I put two bars on top of the tank for stops. There is plenty of room to get a side fill door in. I bought the 90º turn so I could put in a side fill instead of through the bed.
One problem with the tanks is they are only 16 gals. They do the job.

Hugh in NC · 03-30-2017, 07:36 PM

I put that tank in my '63. It fit with out any trimming. I painted it black to blend better with the undercarriage. I installed it with the bed on.

Hugh

AcampoDave · 03-30-2017, 10:52 PM

Here is a thread I started a while ago where Chevyfleetside's recommendation lead to me installing that very tank. http://67-72chevytrucks.com/vboard/s...d.php?t=621177

bbluma · 03-30-2017, 11:02 PM

Quote:

Originally Posted by AcampoDave

Here is a thread I started a while ago where Chevyfleetside's recommendation lead to me installing that very tank. http://67-72chevytrucks.com/vboard/s...d.php?t=621177

haha i actually found your thread about 30 minutes after posting this one. Looks like it should fit in without being a huge headache which is good. Thanks for the help!

03-30-2017, 02:07 PM	#1
bbluma Registered User Join Date: Mar 2017 Location: Wichita, Kansas Posts: 86	Has anyone used the Tanks Inc Universal Tanks in 64-66? Just trying to see if the Tanks Inc Universal tanks, like this one (http://www.tanksinc.com/index.cfm/pa...rod/prd173.htm) would fit for a 66. From what i have read it will, but just want to verify, and see if anyone has any pictures of the install. Thanks.

03-30-2017, 06:13 PM	#2
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,781	Re: Has anyone used the Tanks Inc Universal Tanks in 64-66? They do fit. I think I had to trim my frame about 1/4" but that was about it. I put two bars on top of the tank for stops. There is plenty of room to get a side fill door in. I bought the 90º turn so I could put in a side fill instead of through the bed. One problem with the tanks is they are only 16 gals. They do the job. Attached Images __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

03-30-2017, 07:36 PM	#3
Hugh in NC Registered User Join Date: Aug 2014 Location: My Recliner in Rockingham,North Carolina Posts: 102	Re: Has anyone used the Tanks Inc Universal Tanks in 64-66? I put that tank in my '63. It fit with out any trimming. I painted it black to blend better with the undercarriage. I installed it with the bed on. Hugh

03-30-2017, 10:52 PM	#4
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,753	Re: Has anyone used the Tanks Inc Universal Tanks in 64-66? Here is a thread I started a while ago where Chevyfleetside's recommendation lead to me installing that very tank. http://67-72chevytrucks.com/vboard/s...d.php?t=621177



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.