![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Rear end gear patterns
Good morning all, I sat down to set up me new rear end yesterday. I started with the stock pinion shim and increased .005 twice. The stock shim looked a little shy so I added .005 and it still looked a little shy so I went another .005. What are you all's thoughts?
I personally like the second try with the .030 pinion shim, but then again, this is my first time setting up a gear so I'd like to get other opinions. The first 2 pictures are the stock .025 pinion shim, back lash .007 |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Rear end gear patterns
These 2 pictures are a .030 pinion shim, back lash .008
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Rear end gear patterns
These 2 pictures are a .035 pinion shim, back lash .006
|
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Rear end gear patterns
Here are some combo pictures
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: Rear end gear patterns
Hi neighbor. I like the one with the .030 shims in the second set. You seem to be doing a good job for the first one you have done.
George |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2011
Location: mich
Posts: 655
|
Re: Rear end gear patterns
Try to get this pattern
|
![]() |
![]() |
![]() |
#7 |
Account Suspended
![]() Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Rear end gear patterns
I like the .035 shim, coast side looks great and drive side is toward the carrier which when under hard acceleration should move your contact to the center of the gear.
|
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Mar 2013
Location: Lenexa, KS
Posts: 547
|
Re: Rear end gear patterns
Thanks everyone! I am leaning towards the .030 pinion shim. Coast is more or less centered and drive is towards the inside, which is where Richmond indicates is good. I feel like the .035 shim moved the coast more towards the inside, but the drive is good.
I appreciate all of the help. Once again, the community helped out! |
![]() |
![]() |
![]() |
Bookmarks |
|
|