Are these wheels stock? Wanting to order caps...

[vikingsandpintos]

I got these wheels from somebody, but don't know anything about them. My daughters truck is a 67 C10, with 6 lug wheels. I got these used, but they didn't come with center caps or hub caps, and would like to get some. But I'm not sure if these are stock for this truck, or something else. I was going to order some repo caps, but was hoping somebody could tell me if I order caps for a 67, if they will fit these wheels?

The ridge in the wheel near the lug nuts has 3 bumps, I am pointing to one in the pic. The other side of that ridge on the tire side is smooth all the way around. Any info is appreciated!

[Graham57a]

Originally Posted by vikingsandpintos

I got these wheels from somebody, but don't know anything about them. My daughters truck is a 67 C10, with 6 lug wheels. I got these used, but they didn't come with center caps or hub caps, and would like to get some. But I'm not sure if these are stock for this truck, or something else. I was going to order some repo caps, but was hoping somebody could tell me if I order caps for a 67, if they will fit these wheels?

The ridge in the wheel near the lug nuts has 3 bumps, I am pointing to one in the pic. The other side of that ridge on the tire side is smooth all the way around. Any info is appreciated!

I am no expert but I do not think you can get a dog dish hubcap to snap on to that wheel. The bumps you are referring to should be on the outside of the ridge and I think there should be 4 of them. But you may be able to find whatever centercap works with that wheel and run it, someone else can likely tell you what that wheel is off of.

[OARNGESI]

There not stock you'll need the baby moon style caps go to wheel continues and there are several styles to choose from

[vikingsandpintos]

Hmmm.. Next question then, the inside of the ridge where the 3 bumps are measure about 7" across. Are the baby moons somewhat standard and should fit, or do I need to have particular ones for these wheels? And, the fronts have the rotor sticking thru a decent amount, are they going to clear the caps? I got these mainly for the tires as they were almost new, but my daughter likes these wheels, and I would like to get caps to make it look good. The guy I got them from spent a decent amount to have these cleaned and powdercoated, so would like to use them if I can get caps!

[OARNGESI]

They are fairly standard look on wheel vintiques site there is several styles to choose from and don't worry on a 2wd they'll fit just fine if you are reall worried by one and testify

[AASmedic]

Originally Posted by OARNGESI

There not stock you'll need the baby moon style caps go to wheel continues and there are several styles to choose from

I agree, not stock. They are for "baby moon" type caps.

[special-K]

Those are smoothies. They all came with baby moons but now there are a few centers or hubcaps you can choose from with Wheel Vintiques.

[mike16]

they look like Isuzu rims