Help me pic the right carpet. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mr Handy · 08-10-2017, 08:24 PM

OK so I am getting ready to order carpet for my truck, I have a high hump and will be running an NV4500 so non standard shifter location. Obviously I am running a high hump and am buying ACC carpet.

Here is my question, what is the difference between a carpet for a turbo 400 truck and a 4 speed truck? Both have a high hump to my knowledge, does ACC cut the shifter hole? I would think the carpets would be the same with no holes, but they list two different part numbers.

I figured I would get an answer faster here than from ACC themselves.
Thanks

**Grumpy old man** · 08-10-2017, 09:02 PM

only buy the mass backed carpet , No the carpet is not pre-cut you will have to trim all the edges and any hole needed for your shifter . seat boat holes ,seat belt holes door edge trim .

Mr Handy · 08-10-2017, 09:16 PM

Quote:

Originally Posted by Grumpy old man

only buy the mass backed carpet , No the carpet is not pre-cut you will have to trim all the edges and any hole needed for your shifter . seat boat holes ,seat belt holes door edge trim .

Yup, planning on the Mass back. I just thought it was strange there would be 2 different part numbers for basically the exact same carpet.

**FirstOwner69** · 08-10-2017, 09:34 PM

Quote:

Originally Posted by Mr Handy

OK so I am getting ready to order carpet for my truck, I have a high hump and will be running an NV4500 so non standard shifter location. Obviously I am running a high hump and am buying ACC carpet.

Here is my question, what is the difference between a carpet for a turbo 400 truck and a 4 speed truck? Both have a high hump to my knowledge, does ACC cut the shifter hole? I would think the carpets would be the same with no holes, but they list two different part numbers.

I figured I would get an answer faster here than from ACC themselves.
Thanks

Not all TH400 trucks were high hump. As an example, my '69 2WD with a TH400 and 350 engine is not. Perhaps someone else can clarify when a truck had a high hump. I know I've seen it discussed here.

Good choice on carpet. Price it at Rock Auto before ordering.

weq92f · 08-10-2017, 11:43 PM

You will not be disappointed. I got the same ACC ( low hump ) and it is very well done.

-weq

08-10-2017, 08:24 PM	#1
Mr Handy Registered User Join Date: Feb 2013 Location: Spring Hill, Florida Posts: 465	Help me pic the right carpet. OK so I am getting ready to order carpet for my truck, I have a high hump and will be running an NV4500 so non standard shifter location. Obviously I am running a high hump and am buying ACC carpet. Here is my question, what is the difference between a carpet for a turbo 400 truck and a 4 speed truck? Both have a high hump to my knowledge, does ACC cut the shifter hole? I would think the carpets would be the same with no holes, but they list two different part numbers. I figured I would get an answer faster here than from ACC themselves. Thanks

08-10-2017, 09:02 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Help me pic the right carpet. only buy the mass backed carpet , No the carpet is not pre-cut you will have to trim all the edges and any hole needed for your shifter . seat boat holes ,seat belt holes door edge trim .

08-10-2017, 11:43 PM	#5
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,219	Re: Help me pic the right carpet. You will not be disappointed. I got the same ACC ( low hump ) and it is very well done. -weq __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.