My 52 GMC Build - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lower50's · 09-05-2017, 11:03 PM

Quote:

Originally Posted by rusty76

Awesome pics.

Quote:

Originally Posted by Dieselwrencher

Very cool!

Thanks Guys

lower50's · 09-05-2017, 11:11 PM

So with how much I have been driving the truck this year. My music situation was getting annoying (plug headphone jack into phone, turn on amp, select music and adjust). So I went out and got a sweet deck, no CD. It is half the depth of a regular deck. The amp now powers a 10" sub behind the seat and I mounted the deck in the back of the glove box. Works and sounds great.

Name: IMG_5126.jpg
Views: 422
Size: 56.2 KB

Name: IMG_5127.jpg
Views: 475
Size: 54.3 KB

Name: IMG_5128.jpg
Views: 474
Size: 29.6 KB

lower50's · 09-05-2017, 11:14 PM

Today I finally got to installing the door to floor wind lance. That will stop the one draft I have in the truck. I had them for about a year but I misplaced the steel keepers.
Name: IMG_5146.jpg
Views: 482
Size: 51.4 KB

Name: IMG_5146.jpg
Views: 482
Size: 51.4 KB

Name: IMG_5148.jpg
Views: 482
Size: 49.5 KB

rusty76 · 09-06-2017, 05:04 PM

Nothing like good tunes.

OutlawDrifter · 09-06-2017, 05:11 PM

I've been debating on a stereo setup. Looks like a decent solution.

99 to Life · 09-06-2017, 09:38 PM

nice job, I'v always been a fan of hiding the radio if you are gonna have one. unless its an original or close to it.

lower50's · 09-07-2017, 03:50 AM

Quote:

Originally Posted by rusty76

Nothing like good tunes.

Oh it sounds so good!

Quote:

Originally Posted by OutlawDrifter

I've been debating on a stereo setup. Looks like a decent solution.

Ya it doesn't take up any space for the deck.

Quote:

Originally Posted by 99 to Life

nice job, I'v always been a fan of hiding the radio if you are gonna have one. unless its an original or close to it.

Thanks I agree.

lower50's · 09-11-2017, 06:05 PM

Well just pre-registered for the Goodguys show in Charlotte NC end of October. We had such a good trip last year we are going again. We will be driving the '52 pulling our camper, can't wait.

99 to Life · 09-11-2017, 10:30 PM

awesome, hope we can meet up and everything works out as well as last year for you.

lower50's · 09-12-2017, 03:22 PM

Thanks Henry we will have time to meet up on our way home, hope your around.

99 to Life · 09-12-2017, 10:03 PM

as long as you are around that way thurs to a tuesday I'll be there. I'm usually in pitt on tues afternoon till thurs evening. hoping to drag Geronimo to the new shop by then you can come check it out.

lower50's · 09-13-2017, 03:03 PM

So this started today

I talked to my builder and he said everything is lined up. Won't be long now till I have a play house.
Name: IMG_5195.jpg
Views: 391
Size: 83.2 KB

Name: IMG_5196.jpg
Views: 391
Size: 78.7 KB

OutlawDrifter · 09-13-2017, 04:07 PM

That's awesome! Glad things are rolling along!

**Dieselwrencher** · 09-13-2017, 06:56 PM

Very cool, I'm sure it will feel like forever now for ya.

lower50's · 09-13-2017, 08:21 PM

Quote:

Originally Posted by OutlawDrifter

That's awesome! Glad things are rolling along!

Ya it's about time. I'm not used to construction time.

Quote:

Originally Posted by Dieselwrencher

Very cool, I'm sure it will feel like forever now for ya.

So far I'm happy with how far they got.

99 to Life · 09-13-2017, 11:58 PM

with your truck building ability, I'm surprise you aint building your own garage!!! but will be nice to just have someone else do all that work and you can save your energy for a new killer build (you're taking my COE home right!!!)

lower50's · 09-14-2017, 02:59 PM

Quote:

Originally Posted by 99 to Life

with your truck building ability, I'm surprise you aint building your own garage!!! but will be nice to just have someone else do all that work and you can save your energy for a new killer build (you're taking my COE home right!!!)

Ya well I have tried over and over, I still cant work with wood. Having someone build it will get it built so much faster. COE sure I would love to take it home and work on it!! Wait are you giving it to me?

lower50's · 09-14-2017, 03:08 PM

Today was a lot of back and forth with the skid steer, with the occasional tamping. 8 of these bins of top soil out and there will be 10-12 tri-axle of A-gravel in to get grade. They have to go a long way through my garage. They should be done filling and packing by the end of today.
Name: IMG_5205.jpg
Views: 371
Size: 55.7 KB

Name: IMG_5205.jpg
Views: 371
Size: 55.7 KB

Name: IMG_5207.jpg
Views: 375
Size: 52.7 KB

Name: IMG_5213.jpg
Views: 377
Size: 52.0 KB

Name: IMG_5214.jpg
Views: 369
Size: 66.1 KB

Name: IMG_5210.jpg
Views: 370
Size: 55.5 KB

lower50's · 09-15-2017, 02:49 PM

All leveled and packed, when I left to work they where working on my ramp from the garage to the shop.
Name: IMG_5216.jpg
Views: 344
Size: 59.2 KB

Name: IMG_5217.jpg
Views: 350
Size: 53.4 KB

piratexpress1369a · 09-15-2017, 09:39 PM

Looks awesome, what is the time frame for the building

stesch_c10 · 09-15-2017, 11:16 PM

What size garage. how tall? in floor heat?

lower50's · 09-15-2017, 11:33 PM

Quote:

Originally Posted by piratexpress1369a

Looks awesome, what is the time frame for the building

They should pour concrete next week and frame the week after.

Quote:

Originally Posted by stesch_c10

What size garage. how tall? in floor heat?

30'W 40'D 18' tall. Yes in floor heat.

Nut Case · 09-16-2017, 03:44 AM

Lowered

You're gonna feel like you died and gone to heaven. Shop looks fun.
Starting to frame my "Shed" last week, looking forward to see how you install the radiant heating system. Mines hydronic with 1/2 inch red pex, on 12" centers.

Keep on keepin on

NC

RockinKees · 09-16-2017, 06:13 AM

Nice!!
Wish I had place for my own shop....

**joedoh** · 09-16-2017, 12:44 PM

WOOWowowoww super exciting to see your shop being built. we got quotes on mine and lets just say cooler heads may be prevailing.

09-05-2017, 11:11 PM	#1627
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build So with how much I have been driving the truck this year. My music situation was getting annoying (plug headphone jack into phone, turn on amp, select music and adjust). So I went out and got a sweet deck, no CD. It is half the depth of a regular deck. The amp now powers a 10" sub behind the seat and I mounted the deck in the back of the glove box. Works and sounds great. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-05-2017, 11:14 PM	#1628
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Today I finally got to installing the door to floor wind lance. That will stop the one draft I have in the truck. I had them for about a year but I misplaced the steel keepers. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-06-2017, 05:04 PM	#1629
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My 52 GMC Build Nothing like good tunes. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

09-06-2017, 05:11 PM	#1630
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,788	Re: My 52 GMC Build I've been debating on a stereo setup. Looks like a decent solution. __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

09-06-2017, 09:38 PM	#1631
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build nice job, I'v always been a fan of hiding the radio if you are gonna have one. unless its an original or close to it. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

09-11-2017, 06:05 PM	#1633
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Well just pre-registered for the Goodguys show in Charlotte NC end of October. We had such a good trip last year we are going again. We will be driving the '52 pulling our camper, can't wait. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-11-2017, 10:30 PM	#1634
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build awesome, hope we can meet up and everything works out as well as last year for you. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

09-12-2017, 03:22 PM	#1635
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Thanks Henry we will have time to meet up on our way home, hope your around. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-12-2017, 10:03 PM	#1636
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build as long as you are around that way thurs to a tuesday I'll be there. I'm usually in pitt on tues afternoon till thurs evening. hoping to drag Geronimo to the new shop by then you can come check it out. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

09-13-2017, 03:03 PM	#1637
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build So this started today I talked to my builder and he said everything is lined up. Won't be long now till I have a play house. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-13-2017, 04:07 PM	#1638
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,788	Re: My 52 GMC Build That's awesome! Glad things are rolling along! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

09-13-2017, 06:56 PM	#1639
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: My 52 GMC Build Very cool, I'm sure it will feel like forever now for ya. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-13-2017, 11:58 PM	#1641
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build with your truck building ability, I'm surprise you aint building your own garage!!! but will be nice to just have someone else do all that work and you can save your energy for a new killer build (you're taking my COE home right!!!) __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

09-14-2017, 03:08 PM	#1643
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Today was a lot of back and forth with the skid steer, with the occasional tamping. 8 of these bins of top soil out and there will be 10-12 tri-axle of A-gravel in to get grade. They have to go a long way through my garage. They should be done filling and packing by the end of today. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

09-15-2017, 02:49 PM	#1644
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build All leveled and packed, when I left to work they where working on my ramp from the garage to the shop. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually



Register or Log In To remove these advertisements.

09-15-2017, 09:39 PM	#1645
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: My 52 GMC Build Looks awesome, what is the time frame for the building __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

09-15-2017, 11:16 PM	#1646
stesch_c10 Registered User Join Date: Apr 2016 Location: Redfield SD Posts: 57	Re: My 52 GMC Build What size garage. how tall? in floor heat?

09-16-2017, 03:44 AM	#1648
Nut Case Registered User Join Date: Jul 2014 Location: Clear and Still Idaho Posts: 509	Re: My 52 GMC Build Lowered You're gonna feel like you died and gone to heaven. Shop looks fun. Starting to frame my "Shed" last week, looking forward to see how you install the radiant heating system. Mines hydronic with 1/2 inch red pex, on 12" centers. Keep on keepin on NC __________________ Been there, wrecked that

09-16-2017, 06:13 AM	#1649
RockinKees Registered User Join Date: Dec 2013 Location: Purmerend, Netherlands Posts: 1,657	Re: My 52 GMC Build Nice!! Wish I had place for my own shop.... __________________ Cheers!! Kees. 1959 Chevy Fleetside Longbed My build: http://67-72chevytrucks.com/vboard/s...d.php?t=643426 Kool Guyz CC Instagram: _King_Kustom_

09-16-2017, 12:44 PM	#1650
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: My 52 GMC Build WOOWowowoww super exciting to see your shop being built. we got quotes on mine and lets just say cooler heads may be prevailing. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

Register or Log In To remove these advertisements.