![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2016
Location: Stockholm
Posts: 273
|
Gauge wiring
I will use my original dashboard and wounder if my 22 circuit wiring kit 910-64022 from Speedway can be conected with this part?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2017
Location: Pasadena, CA
Posts: 44
|
Re: Gauge wiring
It can be wired up just fine. I'm not sure if your aftermarket kit will have all the sender wires but here's the diagram.
![]()
__________________
James 1971 Blazer 350/SM465/NP205 1966 Chevelle 468/TH400 2009 Corvette Z06 built LS7 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2016
Location: Stockholm
Posts: 273
|
Re: Gauge wiring
That's good news!
Thank you for posting this diagram. There is only one catch: my number 5 was empty. |
![]() |
![]() |
![]() |
#4 |
Msgt USAF Ret
![]() ![]() Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,714
|
Re: Gauge wiring
Your number 5 is for the temperature sender wire for the three gauge lights dash, on the seven gauge dash it was moved to the number six for the temperature gauge and the number 5 was left empty.
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Mar 2009
Location: WARRENSBURG,MISSOURI,64093
Posts: 1,518
|
![]()
I used that very same wiring harness when I built my 71'.
Just be sure to add a ground wire from the chassis to the metal tin Of the gauge cluster and to the bottom terminal of the temperature gauge (Ask me how I know) I kept thinking I over torqued the nuts on the back of the gauge where the circuit board attaches, causing the circuit traces to ground against the tin, turns out, it just needed a dedicated ground wire to read correctly. I actually used the original front light harness and the firewall connectors, and terminated them to the speedway harness. Everything was labeled so it was simple, just verified the factory wiring diagrams to the speedway schematic and was super easy. Have a good one! Ben ![]()
__________________
"Persistence is the twin sister of Excellence.one is a matter of quality,the other, a matter of time" ![]() “Serious Black” my 1971 Short Bed Fleetside Sold to an outstanding man in Lees Summit,Mo. “Gone, but by no means,Forgotten” Last edited by snipescastle2; 09-07-2017 at 11:54 AM. Reason: Adding |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2017
Location: Pasadena, CA
Posts: 44
|
Re: Gauge wiring
Yep, additional ground is always a good idea. I added one to the tin of
My cluster and used a bullet connector for easy removal.
__________________
James 1971 Blazer 350/SM465/NP205 1966 Chevelle 468/TH400 2009 Corvette Z06 built LS7 |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2016
Location: Stockholm
Posts: 273
|
Re: Gauge wiring
I don't follow "terminal of the temperature gauge".
It's hard to understand the technical language in English up here in northern Scandinavia. Can't I use empty nr 5. |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
Re: Gauge wiring
Use the Electrical Section in the forum. VV is a great asset here and is always helping someone out!
Suprised this has not moved to the electric forum yet! |
![]() |
![]() |
![]() |
#9 | |
Msgt USAF Ret
![]() ![]() Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,714
|
Re: Gauge wiring
Quote:
![]() Let me make it easy for you. The no. 5 goes to a light socket for a warning light, the gauge dashes don't have a warning light. They moved the sending unit wire to spot 6 and left 5 empty. See dashed red line on diagram. The copper strip for spot 6 goes to the temperature gauge post (terminal). The other post (terminal) gets 12 volts from the fuel gauge post . the temperature gauge with the terminals (posts) labeled. Känner mig inte dåligt Jag kan inte prata ett darnord av svenska. Låt mig göra det enkelt för dig. Nejet. 5 går till ett ljusuttag för ett varningsljus, har mätinstrumentet ingen varningslampa. De flyttade sändningsenhetstråden till punkt 6 och lämnade 5 tomma. Se streckad röd linje på diagram. Kopparremsan för punkt 6 går till temperaturmätarens stolpe (terminal). Den andra posten (terminal) får 12 volt från bränslemätarens stolpe.
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. Last edited by VetteVet; 09-08-2017 at 03:12 AM. |
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2016
Location: Stockholm
Posts: 273
|
Re: Gauge wiring
Not bad!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|