79 for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

spencra · 04-16-2004, 09:39 AM

I'm buying a 67 c-20 tomorrow but I had to make a deal with my wife. I have to sell my 79 c-10. The following is the best that I can describe it at present.

The body isn't in bad shape but does need some work nothing
major. The driver side floor will eventually need to be replaced but I have a new floor pan to go with it. The rocker will probably need replacing too (actually it will probably only need some sanding and filler because it is starting to bubble but is still preety much intact). It needs a new dual muffler system, has a leak I believe on the top section of the gas tank. The bench seat was just re-upholstered as well as the headliner I just gave it a tune-up this week (wires, plugs distributor cap and rotor and new air filter, oil change and tranny filter and gasket) it comes with a bed cap (fiberglass). It has an 8ft bed It has a 350 8cyl motor I'm not sure what kind of tranny it has but I'm sure it's the original which I believe is a th350 for that year, automatic of course. It runs kind of rough right now but I believe that the exhaust might have something to do with it as well as the carb. The carb is a holley 600 but it was meant for a manual choke and this truck is an automatic choke. My brother in law rigged it to work but I think that it's getting bad compression because the seal isn't proper.
It will also come with a few misc. parts. I have an extra used radiator and power brake booster with master cylinder plus a brand new master cylinder and an extra front grill.

Sorry I don't have pics right now but I will try to post some next week. I am looking to get about $500 for it.

Thanks,
Larry

spencra · 04-17-2004, 03:45 PM

ttt

spencra · 04-22-2004, 10:00 PM

ttt

spencra · 06-18-2004, 10:52 AM

I'm open to offers

Anybody????

spencra · 01-12-2005, 08:33 PM

I figure I will give it another shot here. I decided that I was going to keep it a while back and do some cool modifications to it but I don't have the time. I am listing it locally tomorrow and lowered the price to $500.

1971c10 · 01-12-2005, 08:45 PM

pics help

spencra · 01-26-2005, 01:29 PM

Maybe I can post a link to the pics:

http://photo.angelfire.lycos.com/service/photo/manage

Ok it's a pain but it works. It's under Larry's stuff .

Jimbotronics · 01-26-2005, 01:30 PM

Larry, I ran into the same issue with Angelfire.

I was able view your photos by right clicking and then cut and pasting the url into my browser. I switched to www.imagestation.com and it's much easier. Cheers, Jim

Good luck with selling your truck!

spencra · 01-26-2005, 01:32 PM

Thanks alot Jim. I'll check that one out.

spencra · 01-26-2005, 01:40 PM

ok let me give imagestation a try.

spencra · 01-26-2005, 01:45 PM

ok, that worked. Image is kinda small, let me post the rest.

spencra · 01-26-2005, 06:27 PM

I tried this post on the 73-87 parts board with better pics.

Thanks for the help Jim.

04-16-2004, 09:39 AM	#1
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	79 for sale I'm buying a 67 c-20 tomorrow but I had to make a deal with my wife. I have to sell my 79 c-10. The following is the best that I can describe it at present. The body isn't in bad shape but does need some work nothing major. The driver side floor will eventually need to be replaced but I have a new floor pan to go with it. The rocker will probably need replacing too (actually it will probably only need some sanding and filler because it is starting to bubble but is still preety much intact). It needs a new dual muffler system, has a leak I believe on the top section of the gas tank. The bench seat was just re-upholstered as well as the headliner I just gave it a tune-up this week (wires, plugs distributor cap and rotor and new air filter, oil change and tranny filter and gasket) it comes with a bed cap (fiberglass). It has an 8ft bed It has a 350 8cyl motor I'm not sure what kind of tranny it has but I'm sure it's the original which I believe is a th350 for that year, automatic of course. It runs kind of rough right now but I believe that the exhaust might have something to do with it as well as the carb. The carb is a holley 600 but it was meant for a manual choke and this truck is an automatic choke. My brother in law rigged it to work but I think that it's getting bad compression because the seal isn't proper. It will also come with a few misc. parts. I have an extra used radiator and power brake booster with master cylinder plus a brand new master cylinder and an extra front grill. Sorry I don't have pics right now but I will try to post some next week. I am looking to get about $500 for it. Thanks, Larry __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course) Last edited by spencra; 01-12-2005 at 08:30 PM.

04-17-2004, 03:45 PM	#2
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ttt __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

04-22-2004, 10:00 PM	#3
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ttt __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

06-18-2004, 10:52 AM	#4
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I'm open to offers Anybody???? __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-12-2005, 08:33 PM	#5
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I figure I will give it another shot here. I decided that I was going to keep it a while back and do some cool modifications to it but I don't have the time. I am listing it locally tomorrow and lowered the price to $500. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-12-2005, 08:45 PM	#6
1971c10 You talkin to ME! Join Date: May 2004 Location: Skyline, Alabama Posts: 177	pics help __________________ Is this yours? PM If it is. 1998 Dodge Dakota Sport-Sold 1971 C10 Auto/307-Sold 1966 Mustang-sold 1976 GMC Short bed 1999 Ford Mustang 2002 Dodge Neon

01-26-2005, 01:29 PM	#7
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Maybe I can post a link to the pics: http://photo.angelfire.lycos.com/service/photo/manage Ok it's a pain but it works. It's under Larry's stuff . __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-26-2005, 01:30 PM	#8
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Larry, I ran into the same issue with Angelfire. I was able view your photos by right clicking and then cut and pasting the url into my browser. I switched to www.imagestation.com and it's much easier. Cheers, Jim Good luck with selling your truck! __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

01-26-2005, 01:32 PM	#9
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Thanks alot Jim. I'll check that one out. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-26-2005, 01:40 PM	#10
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ok let me give imagestation a try. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-26-2005, 01:45 PM	#11
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	ok, that worked. Image is kinda small, let me post the rest. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-26-2005, 06:27 PM	#12
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	I tried this post on the 73-87 parts board with better pics. Thanks for the help Jim. __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.