Will a 88-91 steering wheel fit a 87 C10?

[72farmer]

I like the looks of the 88-91 steering wheels.Will they work on the 73-87 splines/horn ect.?

[Jay2Cor517]

If you mean a wheel like this one, the answer is yes. I have one on my '86. This style wheel is actually listed as OEM from 1988-1994.
And if you don't already have one, they are plentiful at your pick-a-part. They are listed for $10. And just so happen this week, there is a half-off "Hurricane Irma Overflow" Sale. If I didn't already have a few of them, I would collect a few more, LOL

[72farmer]

Thanks Jay,How about a complete list of tools I would need to remove steering wheel?

[Jay2Cor517]

No problem, always happy to share, because this website has given me so much. But anyway, I used a cheap Harbor Freight set, "Bolt-Type Wheel Puller Set" https://www.harborfreight.com/bolt-t...set-62620.html and ratchet with an 3 or 4" extension. Pop the cover off of your steering wheel and check the nut size. I believe it will be the same size for the 88-94

[72farmer]

Thanks I will try that.

[Jay2Cor517]

...Snap ring pliers and a torx bit screwdriver are useful as well

[72farmer]

Bummer! I just checked my local PYP store here in Huntsville AL and they do not have any trucks or SUV's older than 2000.Anybody here want to sell one?

[Jay2Cor517]

72Farmer, PM me

[DieselSJ]

Originally Posted by 72farmer

Bummer! I just checked my local PYP store here in Huntsville AL and they do not have any trucks or SUV's older than 2000.Anybody here want to sell one?

Ebay. They are plentiful.

[bigarmzz]

I have a really nice one ive been holding onto for several years, its in the classifieds here
http://67-72chevytrucks.com/vboard/s...d.php?t=748321

[abig84]

would be cool if there was actually a full list of every steering wheel that was interchangeable. seems almost all chevys around this time interchanged, i got one ouf ot of a cavalier on mine and seen other people with lumina and Beretta steering wheels

[gmachinz]

Its a 7/8 nut too on the shaft. And nicer than the foam wheels are the leather ones from 88-91 LT S10 Blazers

[Axle]

What the diameter of the wheel in post 2? I am looking for a small diamter wheel (preferably under 15").

[Jay2Cor517]

It's 15 1/2" in diameter

[Dead Parrot]

Originally Posted by abig84

would be cool if there was actually a full list of every steering wheel that was interchangeable. seems almost all chevys around this time interchanged, i got one ouf ot of a cavalier on mine and seen other people with lumina and Beretta steering wheels

Don't limit your search to just Chevy wheels. While looking for a replacement for my 75, I test fit a wheel from a period Pontiac. It would have physically and electrically worked but had a square base which didn't seem a good fit for our round columns. Eventually found one from an 80's Blazer. Just make sure you get all of the horn button bits when you get a replacement wheel. Those do change from wheel to wheel.

[GMC85HighSierra]

I have a nice Chevrolet one. Feel free to email me for more info and pics. Thanks

[abig84]

Originally Posted by Dead Parrot

Don't limit your search to just Chevy wheels. While looking for a replacement for my 75, I test fit a wheel from a period Pontiac. It would have physically and electrically worked but had a square base which didn't seem a good fit for our round columns. Eventually found one from an 80's Blazer. Just make sure you get all of the horn button bits when you get a replacement wheel. Those do change from wheel to wheel.

in my experience chevys up until like 10-15 years ago have always been really good about stuff interchanging, where you can take a part off a 65 and it will bolt right up to a 85.

heres my cavalier steering wheel, its very soft and 100 times more comfortable then the factory one

[DieselSJ]

Finally got around to doing my swap. I got tired of the loose pivot bolts so I tore it all apart and tightened it up and put on the new steering wheel. Nice upgrade over the stock 87 wheel.

[cal30_sniper]

Looks good. Those wheels were factory installed on 88-91 squares. I've had the one out of my '90 Suburban in my '86 Suburban for years. Big improvement over the stock wheel.

[DieselSJ]

Originally Posted by cal30_sniper

Looks good. Those wheels were factory installed on 88-91 squares. I've had the one out of my '90 Suburban in my '86 Suburban for years. Big improvement over the stock wheel.

What trans are you running? I want to convert mine to manual with an overdrive. Would love to find a GM version ZF-6.

[BHTH]

Originally Posted by cal30_sniper

Looks good. Those wheels were factory installed on 88-91 squares. I've had the one out of my '90 Suburban in my '86 Suburban for years. Big improvement over the stock wheel.

What are the two rockers beside the ash tray? Nice CB. I was going to run a Cobra in my Blazer, but I think I am just going to sell it.