![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Formerly- 1972SuperCheyenne
![]() Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
20x8 and 20x10 backspacing question
So, as simple as it may be this is one of those things that has always flustered me. For the size wheels mentioned what backspacing would I prefer to run on this truck? It is going to be lowered 5/7 and don’t want wheels rubbing the fender trim but don’t want them way inside the wheel wells either.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
![]() |
![]() |
![]() |
#2 |
Formerly- 1972SuperCheyenne
![]() Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: 20x8 and 20x10 backspacing question
These are what I was looking at.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2004
Location: Elkins, West Virginia
Posts: 2,542
|
Re: 20x8 and 20x10 backspacing question
josh!!!
youll be just fine with those backspacings on the those two wheels, same as I'm using on mine, and I always lower my trucks 5/7 btw, I cant believe you got rid of my old 86 |
![]() |
![]() |
![]() |
#4 |
Formerly- 1972SuperCheyenne
![]() Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: 20x8 and 20x10 backspacing question
Hey brother! Yeah man it’s been gone a while. I did a frame off on it and a LS swap. Now I have a new one I’m throwing together. You using the same size and backspace? Any pics of current truck? Hope you’re doing well buddy.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Sep 2004
Location: Elkins, West Virginia
Posts: 2,542
|
Re: 20x8 and 20x10 backspacing question
Quote:
got it shipped from Georgia back in May...got the front clip swapped, new bumpers front and rear, then got the wheels, then injured my darn self before I could install all the lowering components ![]() by the way, here's a pic of my truck in the current state with those wheels and backspacings you posted about (looks donk not lowered yet) ![]() any pics of your new project? |
|
![]() |
![]() |
![]() |
#6 |
Formerly- 1972SuperCheyenne
![]() Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: 20x8 and 20x10 backspacing question
Mine is currently a bare chassis. Pics as soon as I get enough to make a build thread. So those are the same size wheels and backspace, that’s nice.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
![]() |
![]() |
![]() |
#7 |
GM Addicted
Join Date: Jan 2009
Location: Visalia, Ca
Posts: 2,294
|
Re: 20x8 and 20x10 backspacing question
The torque thrust 1 piece cast wheels are only offered in the 5x5 in 20x8 & 20x10 in those back spacings anyways. To get a different back spacing you’d have to order the two piece version
__________________
![]() ![]() 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage |
![]() |
![]() |
![]() |
#8 |
Formerly- 1972SuperCheyenne
![]() Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
|
Re: 20x8 and 20x10 backspacing question
Correct, but if I have to get different wheels that’s ok too. I’m not 100% set on these. I’d do the Eagle 225s again if I could find a decent deal on some.
__________________
--Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. |
![]() |
![]() |
![]() |
#9 | |
Collector of Projects
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
|
Re: 20x8 and 20x10 backspacing question
Quote:
https://www.ridlerwheel.com/wheels/ ![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|