sprint_9's 72 C10 Project - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sprint_9 · 12-04-2017, 08:01 PM

Quote:

Originally Posted by BIGglaSS

Looking good! Following along...

Quote:

Originally Posted by gringoloco

Where’s the wolf whistle emoji? Looking great!

Quote:

Originally Posted by Jason7121

Looking great can't wait to see more!

Quote:

Originally Posted by knomadd

Looks good!

Thanks everyone.

I started out today fixing the small spots I talked about in my previous post. I couldnt let them go, and after some guidance from Barry with SPI I felt confident in getting them shaped up. After those were sanded and spotted in everything sat for a couple hours then I went to clear. My clear went pretty good for only being my second time spraying clear. I learned alot and by my last coat things were flowing out pretty decent, a good cut and buff and I think it will look real nice, to be fair the pictures look better than in person.

Im beyond thrilled with how the old gas cap filled in, I have alot of time in that one area trying to get that to look good.

builtbyKane · 12-04-2017, 08:47 PM

That looks great

Jason7121 · 12-04-2017, 09:59 PM

Really nice looks great!

Bennett68C10 · 12-04-2017, 10:12 PM

Very nice

knomadd · 12-05-2017, 12:29 PM

Wow, that looks really good!

sprint_9 · 12-05-2017, 05:10 PM

Quote:

Originally Posted by builtbyKane

That looks great

Quote:

Originally Posted by Jason7121

Really nice looks great!

Quote:

Originally Posted by Bennett68C10

Very nice

Quote:

Originally Posted by knomadd

Wow, that looks really good!

Thank you.

Doing a little sanding and buffing today. I sprayed a little far from the panel so I had a little bit too much orange peel.

A little before and after

gringoloco · 12-09-2017, 10:51 AM

Man, I’m loving this color

How’s the fit on the Speed Engineering headers? Specifically, how much hang down below the framerails?

Bennett68C10 · 12-09-2017, 11:30 AM

^^^ I would like to know this too, I’m unsure if I want to keep the hooker manifolds I currently have or run some 1 7/8” full length headers!

sprint_9 · 12-09-2017, 08:42 PM

Quote:

Originally Posted by gringoloco

Man, I’m loving this color

How’s the fit on the Speed Engineering headers? Specifically, how much hang down below the framerails?

Quote:

Originally Posted by Bennett68C10

^^^ I would like to know this too, I’m unsure if I want to keep the hooker manifolds I currently have or run some 1 7/8” full length headers!

I couldn't have picked a better color. Its so hard to pick the right one but I ended up with exactly what I wanted.

There is a good thread on the headers here: http://67-72chevytrucks.com/vboard/s...d.php?t=746414

I have some info on page 1, and most of what your looking for is on page 2. Side shots below the frame and block clearance. Let me know if you want any other info or measurements.

gringoloco · 12-10-2017, 02:05 AM

Quote:

Originally Posted by sprint_9

I couldn't have picked a better color. Its so hard to pick the right one but I ended up with exactly what I wanted.

There is a good thread on the headers here: http://67-72chevytrucks.com/vboard/s...d.php?t=746414

I have some info on page 1, and most of what your looking for is on page 2. Side shots below the frame and block clearance. Let me know if you want any other info or measurements.

That helps a lot, thanks! 4L60E, right? Looks like a stepped, deep pan. Hard to tell, but it looks like your trans pan hangs below the framerails a little and the collectors a little below that. How much lower?

sprint_9 · 12-10-2017, 11:58 AM

I will get you some measurements today.

gringoloco · 12-11-2017, 05:14 PM

Quote:

Originally Posted by sprint_9

I will get you some measurements today.

Thanks a lot for checking into this. Looks like about 3/4” hang down from what I can tell in pictures

sprint_9 · 12-12-2017, 12:10 AM

Im going to try and remember tomorrow. Ive been down to the shop twice now and end up getting side tracked and remember about it when I get home.

sprint_9 · 12-12-2017, 01:48 PM

They hang down about 1.5 inches and are about level with my transmission pan.

gringoloco · 12-12-2017, 09:34 PM

Thanks a lot for the info!

sprint_9 · 12-12-2017, 09:52 PM

No problem, let me know if you need anything else.

sprint_9 · 12-19-2017, 11:37 PM

I ended up sanding my clear and spraying 3 more coats. I had too much texture in too many spots I didnt want to buff, especially inside the cab. It was alot of work but it came out great, couple runs to level and some denibbing and it will be real slick. These are right off the gun, it looks as good in person now as it does in the pictures.

Also sprayed a bunch of under hood and dash items in epoxy.

Jason7121 · 12-20-2017, 01:30 AM

Wow looks amazing!

sprint_9 · 01-24-2018, 12:16 AM

Not much happening lately, been spending alot of time cutting and buffing. It took me awhile to find a set of steps that worked for me and I finally got it down today. All the outside of the cab is done except for the rockers, and one weird spot where I had a run. I have some de-nibbing to finish on the inside, Im about half done, and then buff it and it will be ready to mount to the frame.

Ive got quite a few things to knock out before I mount the cab, exhaust, fuel lines, plug wires, transmission cooling lines, as well as some other odds and ends that will be easier to do with it off.

sprint_9 · 01-24-2018, 12:24 AM

Ran across this a couple weeks ago, a fun little before and after. One of the best decisions I have made is to smooth the firewall.

**rustytruck50** · 01-24-2018, 11:40 AM

Nice job!!!

gringoloco · 01-25-2018, 02:07 AM

So nice

knomadd · 01-25-2018, 11:19 AM

Looks great!

Jason7121 · 01-25-2018, 11:46 AM

Looks really good nice work

sprint_9 · 01-26-2018, 12:19 AM

Quote:

Originally Posted by rustytruck50

Nice job!!!

Quote:

Originally Posted by gringoloco

So nice

Quote:

Originally Posted by knomadd

Looks great!

Quote:

Originally Posted by Jason7121

Looks really good nice work

Thank you.

I think Im going to work on exhaust this weekend for a change of scenery. It will be nice to work on something other than this cab for a change. I have almost two weeks of time off from work to use by the end of February, so Im hoping to make some good headway this next month.

12-04-2017, 08:47 PM	#127
builtbyKane Registered User Join Date: Oct 2012 Location: mountain home, AR Posts: 794	Re: sprint_9's 72 C10 Project That looks great __________________ Project Double Tap http://67-72chevytrucks.com/vboard/s...d.php?t=555901 69 Olive Verde http://67-72chevytrucks.com/vboard/s...d.php?t=734720

12-04-2017, 09:59 PM	#128
Jason7121 Registered User Join Date: Jun 2016 Location: Visalia California Posts: 891	Re: sprint_9's 72 C10 Project Really nice looks great!

12-04-2017, 10:12 PM	#129
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: sprint_9's 72 C10 Project Very nice __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-05-2017, 12:29 PM	#130
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: sprint_9's 72 C10 Project Wow, that looks really good! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

12-09-2017, 10:51 AM	#132
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: sprint_9's 72 C10 Project Man, I’m loving this color How’s the fit on the Speed Engineering headers? Specifically, how much hang down below the framerails? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-09-2017, 11:30 AM	#133
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: sprint_9's 72 C10 Project ^^^ I would like to know this too, I’m unsure if I want to keep the hooker manifolds I currently have or run some 1 7/8” full length headers! __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-10-2017, 11:58 AM	#136
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: sprint_9's 72 C10 Project I will get you some measurements today.

12-12-2017, 12:10 AM	#138
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: sprint_9's 72 C10 Project Im going to try and remember tomorrow. Ive been down to the shop twice now and end up getting side tracked and remember about it when I get home.

12-12-2017, 01:48 PM	#139
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: sprint_9's 72 C10 Project They hang down about 1.5 inches and are about level with my transmission pan.

12-12-2017, 09:34 PM	#140
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: sprint_9's 72 C10 Project Thanks a lot for the info! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-12-2017, 09:52 PM	#141
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: sprint_9's 72 C10 Project No problem, let me know if you need anything else.

12-19-2017, 11:37 PM	#142
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: sprint_9's 72 C10 Project I ended up sanding my clear and spraying 3 more coats. I had too much texture in too many spots I didnt want to buff, especially inside the cab. It was alot of work but it came out great, couple runs to level and some denibbing and it will be real slick. These are right off the gun, it looks as good in person now as it does in the pictures. Also sprayed a bunch of under hood and dash items in epoxy. Attached Images

12-20-2017, 01:30 AM	#143
Jason7121 Registered User Join Date: Jun 2016 Location: Visalia California Posts: 891	Re: sprint_9's 72 C10 Project Wow looks amazing!

01-24-2018, 12:16 AM	#144
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: sprint_9's 72 C10 Project Not much happening lately, been spending alot of time cutting and buffing. It took me awhile to find a set of steps that worked for me and I finally got it down today. All the outside of the cab is done except for the rockers, and one weird spot where I had a run. I have some de-nibbing to finish on the inside, Im about half done, and then buff it and it will be ready to mount to the frame. Ive got quite a few things to knock out before I mount the cab, exhaust, fuel lines, plug wires, transmission cooling lines, as well as some other odds and ends that will be easier to do with it off. Attached Images

01-24-2018, 12:24 AM	#145
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 862	Re: sprint_9's 72 C10 Project Ran across this a couple weeks ago, a fun little before and after. One of the best decisions I have made is to smooth the firewall. Attached Images



Register or Log In To remove these advertisements.

01-24-2018, 11:40 AM	#146
rustytruck50 Senior Member Join Date: Feb 2011 Location: Papillion, Ne Posts: 897	Re: sprint_9's 72 C10 Project Nice job!!! __________________ -Doug '05 RCSB Sierra 2WD '71 Sierra 2WD Longbed '98 Silverado K1500 Xcab...sold '72 Highlander"Raymond"...sold

01-25-2018, 02:07 AM	#147
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: sprint_9's 72 C10 Project So nice __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-25-2018, 11:19 AM	#148
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: sprint_9's 72 C10 Project Looks great! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

01-25-2018, 11:46 AM	#149
Jason7121 Registered User Join Date: Jun 2016 Location: Visalia California Posts: 891	Re: sprint_9's 72 C10 Project Looks really good nice work

Register or Log In To remove these advertisements.