IN 250 engine for parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70STOVEBOLT** · 12-06-2017, 01:09 PM

I have a mostly complete 250 engine out of my '70 C/10, it has around 100K miles on it. Does not have power steering or A/C, does not have an air cleaner. Free if picked up. Hauling off to scrap at end of 2022. See last post also.

Has good Monojet carb, $50 plus shipping pics below SOLD
Has good exhaust manifold SOLD
Has good distributor with Pertronix Ignitor $35 plus shipping. SOLD

If you need anything else let me know and I will get pics and prices.

**70STOVEBOLT** · 01-04-2018, 06:04 PM

Calling all inline guys!

**70STOVEBOLT** · 01-20-2018, 01:03 PM

Any and all parts for sale. Also have fan shroud and finger guard.

Rwsmith66@yahoo.com · 01-22-2018, 12:24 AM

Is the fan shroud in good shape? And is it for the 250. And how much too ship to 74859?Thanks

**70STOVEBOLT** · 01-22-2018, 10:39 AM

Yes it is in good shape. It was in the truck when I bought it, and it had the 250 with 3OTT.
I will post some pics and get a shipping quote for you later today.

Thanks,
Mark

**70STOVEBOLT** · 01-22-2018, 01:04 PM

It's dirty but there are no cracks or issues that I know of. $35 for the shroud, and shipping is $35 so $70 shipped. Here are some pics.

Rwsmith66@yahoo.com · 01-22-2018, 11:10 PM

I will take it for 70.00 shipped.let me know how to pay. Thanks RW

**70STOVEBOLT** · 01-23-2018, 08:51 AM

PM sent with PayPal info.

Rwsmith66@yahoo.com · 01-23-2018, 10:37 AM

Payment sent. Thanks RW

**70STOVEBOLT** · 01-23-2018, 01:25 PM

Payment received, will ship as soon as I find a box. Will PM tracking number, will be today or tomorrow.

Thanks again,
Mark

Rwsmith66@yahoo.com · 01-29-2018, 07:30 PM

Got the fan shroud today.Looks good ,Thanks RW

**70STOVEBOLT** · 01-30-2018, 07:58 AM

Glad to hear it

CST10 · 01-30-2018, 10:14 PM

Can you get me some photos of the mono jet carb including the stamping markings and all sides.

**70STOVEBOLT** · 01-30-2018, 10:38 PM

For pics see the thread below, post #10. I will check the stamped numbers tomorrow and post them.

http://67-72chevytrucks.com/vboard/s...uging+inyetest

**70STOVEBOLT** · 01-31-2018, 11:52 AM

Here is a pic of the carb numbers

CST10 · 01-31-2018, 09:02 PM

Don’t really need it but it’s always nice to have spare parts. I was burnt in the past on a used carb. The whole thing inside was corroded to the point of no return, scrap metal.

What’s your bottom dollar shipped?

**70STOVEBOLT** · 02-01-2018, 08:57 AM

Here are a couple more pics. It was on my daily driver 250 up until 16 months ago when I put in a 402. It has been stored in a climate controlled building so there should be no rust inside. I need $50 shipped plus PP fees.

Rwsmith66@yahoo.com · 02-01-2018, 07:46 PM

If you still have the distributor with pettronix ,hom much to ship to 74859?Thanks RW

**70STOVEBOLT** · 02-01-2018, 08:56 PM

I do have it, I will check shipping and post pics tomorrow with a price.

CST10 · 02-01-2018, 09:38 PM

I’m pass. Thanks

**70STOVEBOLT** · 02-01-2018, 10:50 PM

Quote:

Originally Posted by CST10

I’m pass. Thanks

How much do you want to pay?

**70STOVEBOLT** · 02-02-2018, 07:11 PM

Quote:

Originally Posted by Rwsmith66@yahoo.com

If you still have the distributor with pettronix ,hom much to ship to 74859?Thanks RW

My post should have read I DO still have it. $50 shipped plus PP fees. I tried to post pics earlier and the site would not let me. I will try again. Or if you want I can email them to you.

**70STOVEBOLT** · 02-02-2018, 07:19 PM

Here we go. I also have a new cap and rotor, and the wires only have about 5K miles on them. Let me know if interested in those as well.

Thanks,
Mark

Rwsmith66@yahoo.com · 02-02-2018, 08:57 PM

I'll take the pertronix distrubutor for 52.00 shipped. Thanks RW
:'

**70STOVEBOLT** · 02-02-2018, 10:57 PM

PM sent with payment info. I will try to get it shipped tomorrow.

01-04-2018, 06:04 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Calling all inline guys! __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-20-2018, 01:03 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Any and all parts for sale. Also have fan shroud and finger guard. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-22-2018, 12:24 AM	#4
Rwsmith66@yahoo.com Registered User Join Date: May 2017 Location: Okemah Ok. Posts: 218	Re: 250 engine for parts Is the fan shroud in good shape? And is it for the 250. And how much too ship to 74859?Thanks

01-22-2018, 10:39 AM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Yes it is in good shape. It was in the truck when I bought it, and it had the 250 with 3OTT. I will post some pics and get a shipping quote for you later today. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-22-2018, 01:04 PM	#6
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts It's dirty but there are no cracks or issues that I know of. $35 for the shroud, and shipping is $35 so $70 shipped. Here are some pics. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-06-2017, 01:09 PM	#1
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	250 engine for parts I have a mostly complete 250 engine out of my '70 C/10, it has around 100K miles on it. Does not have power steering or A/C, does not have an air cleaner. Free if picked up. Hauling off to scrap at end of 2022. See last post also. Has good Monojet carb, $50 plus shipping pics below SOLD Has good exhaust manifold SOLD Has good distributor with Pertronix Ignitor $35 plus shipping. SOLD If you need anything else let me know and I will get pics and prices. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear Last edited by 70STOVEBOLT; 12-02-2022 at 12:42 PM.

01-22-2018, 11:10 PM	#7
Rwsmith66@yahoo.com Registered User Join Date: May 2017 Location: Okemah Ok. Posts: 218	Re: 250 engine for parts I will take it for 70.00 shipped.let me know how to pay. Thanks RW

01-23-2018, 08:51 AM	#8
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts PM sent with PayPal info. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-23-2018, 10:37 AM	#9
Rwsmith66@yahoo.com Registered User Join Date: May 2017 Location: Okemah Ok. Posts: 218	Re: 250 engine for parts Payment sent. Thanks RW

01-23-2018, 01:25 PM	#10
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Payment received, will ship as soon as I find a box. Will PM tracking number, will be today or tomorrow. Thanks again, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-29-2018, 07:30 PM	#11
Rwsmith66@yahoo.com Registered User Join Date: May 2017 Location: Okemah Ok. Posts: 218	Re: 250 engine for parts Got the fan shroud today.Looks good ,Thanks RW

01-30-2018, 07:58 AM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Glad to hear it __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-30-2018, 10:14 PM	#13
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 250 engine for parts Can you get me some photos of the mono jet carb including the stamping markings and all sides. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

01-30-2018, 10:38 PM	#14
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts For pics see the thread below, post #10. I will check the stamped numbers tomorrow and post them. http://67-72chevytrucks.com/vboard/s...uging+inyetest __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear Last edited by 70STOVEBOLT; 06-04-2018 at 04:49 PM.

01-31-2018, 11:52 AM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Here is a pic of the carb numbers Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear



Register or Log In To remove these advertisements.

01-31-2018, 09:02 PM	#16
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 250 engine for parts Don’t really need it but it’s always nice to have spare parts. I was burnt in the past on a used carb. The whole thing inside was corroded to the point of no return, scrap metal. What’s your bottom dollar shipped? __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

02-01-2018, 08:57 AM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Here are a couple more pics. It was on my daily driver 250 up until 16 months ago when I put in a 402. It has been stored in a climate controlled building so there should be no rust inside. I need $50 shipped plus PP fees. Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-01-2018, 07:46 PM	#18
Rwsmith66@yahoo.com Registered User Join Date: May 2017 Location: Okemah Ok. Posts: 218	Re: 250 engine for parts If you still have the distributor with pettronix ,hom much to ship to 74859?Thanks RW

02-01-2018, 08:56 PM	#19
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts I do have it, I will check shipping and post pics tomorrow with a price. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear Last edited by 70STOVEBOLT; 06-04-2018 at 04:51 PM.

02-01-2018, 09:38 PM	#20
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: 250 engine for parts I’m pass. Thanks __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

02-02-2018, 07:19 PM	#23
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts Here we go. I also have a new cap and rotor, and the wires only have about 5K miles on them. Let me know if interested in those as well. Thanks, Mark Attached Images __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-02-2018, 08:57 PM	#24
Rwsmith66@yahoo.com Registered User Join Date: May 2017 Location: Okemah Ok. Posts: 218	Re: 250 engine for parts I'll take the pertronix distrubutor for 52.00 shipped. Thanks RW :'

02-02-2018, 10:57 PM	#25
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: 250 engine for parts PM sent with payment info. I will try to get it shipped tomorrow. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.