IA Camper Wire Loom - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 12-13-2017, 07:54 PM

-
I have a camper wire loom for sale. Good shape with a couple of areas that need a little tape. It has the Red power wire that runs all the way to the battery junction block... $35 plus shipping.

Per board rules no PM's without posting in thread.

PayPal or Money Order works for me.

Thanks for looking.
LockDoc

**LockDoc** · 02-18-2018, 12:35 AM

-
Ttt

**PDXk5** · 02-18-2018, 04:04 AM

Leon,
I'll take it. Do you have any photos of factory routing, mounting ?

**LockDoc** · 02-18-2018, 10:35 PM

Quote:

Originally Posted by PDXk5

Leon,
I'll take it. Do you have any photos of factory routing, mounting ?

No, sorry I don't. I took it off of a truck a long time ago. I would think it would run along with the stock tail light wiring and go up between the cab and bed but not sure.

PM sent.

Thanks,
LockDoc

**PDXk5** · 02-20-2018, 12:04 AM

Leon,
I'm going to pass. Sorry for the delayed response.

402GMC · 02-20-2018, 07:30 PM

i'll take it

**LockDoc** · 02-20-2018, 07:53 PM

Quote:

Originally Posted by PDXk5

Leon,
I'm going to pass. Sorry for the delayed response.

No problem Thanks for the heads up.....

Quote:

Originally Posted by 402GMC

i'll take it

PM sent.

Thanks,
LockDoc

jjzepplin · 02-20-2018, 08:06 PM

In line if it gets to me.

**LockDoc** · 02-20-2018, 08:40 PM

Quote:

Originally Posted by jjzepplin

In line if it gets to me.

I do have another one. I will have to check it but I think it is the same condition.

LockDoc

hotrodmtodd · 02-25-2018, 06:42 PM

Did you ever sell either one? Is this so you can run a camper from the factory second battery position? Thanks, Mike

**LockDoc** · 02-25-2018, 06:58 PM

Quote:

Originally Posted by hotrodmtodd

Did you ever sell either one? Is this so you can run a camper from the factory second battery position? Thanks, Mike

I sold one, I still have one left. This loom is for the lights on the camper. It has a 10ga red wire that connects to the junction block on the passengers inner fender and runs through the loom with the rest of the wires but I don't know it's purpose. Maybe someone knows and will chime in on it. I think there is another loom for the auxiliary battery.

Thanks,
LockDoc

hotrodmtodd · 02-25-2018, 07:04 PM

OK thanks. I will wait to see if anyone jumps in...how far are you from I 80?

jjzepplin · 02-25-2018, 07:34 PM

Quote:

Originally Posted by LockDoc

I do have another one. I will have to check it but I think it is the same condition.

LockDoc

Can I still buy one (I'LL take it)? Pending pics of course...But I am in if there are no big problems..

**LockDoc** · 02-25-2018, 10:58 PM

Quote:

Originally Posted by jjzepplin

Can I still buy one (I'LL take it)? Pending pics of course...But I am in if there are no big problems..

Yes, no one has committed. I will see if I can get a couple of pictures. Basically looks just like the first one....

LockDoc

**LockDoc** · 02-25-2018, 11:04 PM

-
Here are pictures of both sides. It also has a couple of spots that need a little tape. PM sent.

LockDoc

**jocko** · 02-25-2018, 11:06 PM

Leon, I'll take it if jjzep passes. Thank you. (all yours if you want it jj, I'm just jumpin in line behind you)

.

hotrodmtodd · 02-25-2018, 11:31 PM

Hey Doc...Im just curious how far you are from I 80?

**LockDoc** · 02-25-2018, 11:34 PM

Quote:

Originally Posted by hotrodmtodd

OK thanks. I will wait to see if anyone jumps in...how far are you from I 80?

I am only 7 miles South of I-80. If you are ever heading this way shoot me a PM.

LockDoc

**LockDoc** · 02-25-2018, 11:36 PM

Quote:

Originally Posted by jocko

Leon, I'll take it if jjzep passes. Thank you. (all yours if you want it jj, I'm just jumpin in line behind you)

.

We will see what he says.

Thanks,
LockDoc

hotrodmtodd · 02-25-2018, 11:45 PM

Yes actually I am heading that way in the near future...I bought an old Vista Cruiser wagon in Des Moines that needs a tailgate key...just wondering if that's something you could do for me on the way back through? Can PM you with the details if so...

**LockDoc** · 02-25-2018, 11:58 PM

Quote:

Originally Posted by hotrodmtodd

Yes actually I am heading that way in the near future...I bought an old Vista Cruiser wagon in Des Moines that needs a tailgate key...just wondering if that's something you could do for me on the way back through? Can PM you with the details if so...

I will PM you.

jjzepplin · 02-26-2018, 04:21 AM

I'll take it sir. Sending payment per PM.

jjzepplin · 02-26-2018, 04:27 AM

Payment sent!

**LockDoc** · 02-26-2018, 11:38 AM

Quote:

Originally Posted by jjzepplin

Payment sent!

Both camper harnesses are sold.

Thanks,
LockDoc

12-13-2017, 07:54 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,640	Camper Wire Loom - I have a camper wire loom for sale. Good shape with a couple of areas that need a little tape. It has the Red power wire that runs all the way to the battery junction block... $35 plus shipping. Per board rules no PM's without posting in thread. PayPal or Money Order works for me. Thanks for looking. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 02-18-2018 at 12:35 AM.

02-18-2018, 12:35 AM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,640	Re: Camper Wire Loom - Ttt __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-18-2018, 04:04 AM	#3
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 935	Re: Camper Wire Loom Leon, I'll take it. Do you have any photos of factory routing, mounting ?

02-20-2018, 12:04 AM	#5
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 935	Re: Camper Wire Loom Leon, I'm going to pass. Sorry for the delayed response.

02-20-2018, 07:30 PM	#6
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 408	Re: Camper Wire Loom i'll take it

02-20-2018, 08:06 PM	#8
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Camper Wire Loom In line if it gets to me. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-25-2018, 06:42 PM	#10
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: Camper Wire Loom Did you ever sell either one? Is this so you can run a camper from the factory second battery position? Thanks, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

02-25-2018, 07:04 PM	#12
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: Camper Wire Loom OK thanks. I will wait to see if anyone jumps in...how far are you from I 80? __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

02-25-2018, 11:04 PM	#15
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,640	Re: Camper Wire Loom - Here are pictures of both sides. It also has a couple of spots that need a little tape. PM sent. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

02-25-2018, 11:06 PM	#16
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Camper Wire Loom Leon, I'll take it if jjzep passes. Thank you. (all yours if you want it jj, I'm just jumpin in line behind you) .

02-25-2018, 11:31 PM	#17
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: Camper Wire Loom Hey Doc...Im just curious how far you are from I 80? __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

02-25-2018, 11:45 PM	#20
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: Camper Wire Loom Yes actually I am heading that way in the near future...I bought an old Vista Cruiser wagon in Des Moines that needs a tailgate key...just wondering if that's something you could do for me on the way back through? Can PM you with the details if so... __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

02-26-2018, 04:21 AM	#22
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Camper Wire Loom I'll take it sir. Sending payment per PM. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

02-26-2018, 04:27 AM	#23
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Camper Wire Loom Payment sent! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.