![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2007
Location: cincy
Posts: 693
|
Ignition switch turning
My complete ignition switch is turning when I turn key to start the truck.How can I tighten to repair?
__________________
There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2014
Location: Lincoln City DE
Posts: 1,292
|
Re: Ignition switch turning
Bezel is threaded . turn it to tighten .
__________________
Stan 67 swb BLU MULE posted via flip-fone |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2014
Location: Lincoln City DE
Posts: 1,292
|
Re: Ignition switch turning
__________________
Stan 67 swb BLU MULE posted via flip-fone |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Oct 2017
Location: Fort Worth, Texas
Posts: 1
|
Re: Ignition switch turning
My 67 has a notch in the dash for proper alignment of the switch, keeps it from turning after you tighten the bezel.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Mar 2007
Location: cincy
Posts: 693
|
Re: Ignition switch turning
Does the cylinder need to be removed first? Do I need a special tool to turn?
__________________
There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2014
Location: Lincoln City DE
Posts: 1,292
|
Re: Ignition switch turning
No and No
__________________
Stan 67 swb BLU MULE posted via flip-fone |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2007
Location: cincy
Posts: 693
|
Re: Ignition switch turning
Thanks for the help.
__________________
There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb |
![]() |
![]() |
![]() |
#8 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,405
|
Re: Ignition switch turning
There is a tang on the switch that lodges in a slot in the edge of the hole that the switch mounts in. It is possible that that tang has worn off, if the switch has been loose for some amount of time. If it is still there, the escutcheon nut will tighten up nicely if the tang is in that slot. There is a spanner made for tightening the nut, but you can use a fabricated one for it. The spanner fits the three indentations on the escutcheon nut.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
Bookmarks |
|
|