![]() |
|
|
#1 |
|
Registered User
Join Date: Sep 2007
Location: Wichita Falls, Texas
Posts: 459
|
Front wheelwells
I have searched already and didn't find any definate answers so here goes... I have heard that 73-80 front inner fenders will almost bolt in to a 81 up and are much bigger. Any truth to this? Has anybody done it?
|
|
|
|
|
|
#2 |
|
Registered User
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,809
|
Re: Front wheelwells
Did the reverse on the passenger side, 81 up inner on a 75 outer(yard sold me the wrong one). Most of the holes match. Had to drill one or two(years ago, don't remember which ones). Battery box bolt hole doesn't match, lower in front on the 81+. Guess you would have the flip problem in your case, battery bolt hole too high.
|
|
|
|
|
|
#3 |
|
Registered User
Join Date: Nov 2015
Location: Smethport, PA
Posts: 1,213
|
Re: Front wheelwells
I tried fitting an early one into my 85 K30. All of the holes along the front were wrong as well as the holes under the cab floor. The ones along the fender lip mostly lined up. The biggest problem was the steering box. I ended up just getting the correct one.
__________________
85 K30 crew cab dually - Project http://67-72chevytrucks.com/vboard/s...d.php?t=694939 87 Wrangler Rock Crawler - Reason for the project http://www.wranglerforum.com/f330/da...ld-122601.html 04 1500 crew cab http://67-72chevytrucks.com/vboard/s...d.php?t=786514 |
|
|
|
![]() |
| Bookmarks |
|
|