4l60e cooler line fittings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

upon1 · 01-31-2018, 09:26 PM

What is the best sealing washer to use? Been having trouble not crushing the Nylon type and was wondering if the brass washers would work better?

sprint_9 · 01-31-2018, 11:05 PM

Copper is good

**truckdude239** · 02-01-2018, 03:19 PM

I used an fittings that had platic washers been in there 3 years havent leaked a drop

LS-K · 03-23-2018, 04:20 AM

Im sure you’ve might have already made your mind up on what set up to use.

Here is my 2¢.

I initially went with the AN fittings and nylon washers. That only lasted me about 2K miles before I sprung a leak.

I went with the original GM fittings at the case that use the C-Clip lock thinks and then use 98-02 Camaro Camaro hardlines. I made a few tweaks to the hardlines, nothing crazy. I ran the hardlines till the reached, let’s say the crank pulley. I cut them off and used Earls hardline to AN compression fittings. From there I ran some fabbed up hoses to my front mounted trans cooler.

01-31-2018, 09:26 PM	#1
upon1 Registered User Join Date: Oct 2007 Location: Saskatoon Posts: 138	4l60e cooler line fittings What is the best sealing washer to use? Been having trouble not crushing the Nylon type and was wondering if the brass washers would work better? __________________ "Lifes to short to drive an ugly truck." Project 55 To Life http://67-72chevytrucks.com/vboard/s...d.php?t=432994

01-31-2018, 11:05 PM	#2
sprint_9 Registered User Join Date: Nov 2012 Location: 9 Posts: 863	Re: 4l60e cooler line fittings Copper is good

02-01-2018, 03:19 PM	#3
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,259	Re: 4l60e cooler line fittings I used an fittings that had platic washers been in there 3 years havent leaked a drop __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2015 toyota Tacoma Daily 2012 Subura outback 2000 Tahoe 5.3l 420k 1999 honda accord General manager for Marco's Carwash & lube

03-23-2018, 04:20 AM	#4
LS-K Registered User Join Date: Dec 2013 Location: Tucson, AZ Posts: 107	Re: 4l60e cooler line fittings Im sure you’ve might have already made your mind up on what set up to use. Here is my 2¢. I initially went with the AN fittings and nylon washers. That only lasted me about 2K miles before I sprung a leak. I went with the original GM fittings at the case that use the C-Clip lock thinks and then use 98-02 Camaro Camaro hardlines. I made a few tweaks to the hardlines, nothing crazy. I ran the hardlines till the reached, let’s say the crank pulley. I cut them off and used Earls hardline to AN compression fittings. From there I ran some fabbed up hoses to my front mounted trans cooler. Last edited by LS-K; 03-23-2018 at 04:21 AM. Reason: Added text



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.