The Ultimate Craigslist find thread - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

83GMCK2500 · 02-21-2018, 03:00 PM

That thing has got a heavy front axle, wow! It's near me...if only I had someplace to park it...that chassis has rollback or ramp truck written on it to me.

C10 - C90 Bill · 02-21-2018, 03:50 PM

I agree, it would make a nice Rollback.

stsalvage · 02-21-2018, 04:04 PM

Trucks like these are begging for a 6.0 with the Allison 6-9 speed auto and use the splitter rear end.I hate seeing these trucks waist away.I hope in the next few years i can buy a few and stick the 6.0 with the auto and make them worth driving again with new power steering and hydro boost power brakes.These trucks can be Re engineered for long term use.Removing the gas take and putting a fuel sell on the side of the truck Update all the running gear.you have a truck that will get good gas mileage plus it will be a dream to drive

NoStopN · 02-21-2018, 08:20 PM

I wouldn't stick with a gas engine for something like that LCF. A project like it would need a new engine, so I'd try to find a Duramax V8 with an Allison.

NoStopN · 02-21-2018, 08:37 PM

Even when I'm not looking for parts for my truck, I keep finding more trucks. And why do I always find the flatbeds? https://atlanta.craigslist.org/eat/c...501537539.html The no title situation always scares me.

C10 - C90 Bill · 02-21-2018, 08:56 PM

I've got a different idea for the LCF, lol.

A 4-53T Detroit with a 10-Speed Road Ranger.

stsalvage · 02-21-2018, 09:26 PM

So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove

Can you make the 2 speed slitter work with the Allison

Dannny B · 02-21-2018, 11:26 PM

Quote:

Originally Posted by C10 - C90 Bill

I've got a different idea for the LCF, lol.

A 4-53T Detroit with a 10-Speed Road Ranger.

,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

83GMCK2500 · 02-21-2018, 11:31 PM

Quote:

Originally Posted by Dannny B

,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

Naaaaaaaah!

I'm with Bill on that choice. When I was old enough to ride with my dad in his Astro 95 moving pieces of his farm equipment I used to fall asleep to the sound of the 6-71 under me.

C10 - C90 Bill · 02-22-2018, 12:48 AM

Quote:

Originally Posted by Dannny B

,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

Lol, I used to own a '67 7500 that sounded exactly like this one with the 6V-53:

You Tube

C10 - C90 Bill · 02-22-2018, 12:56 AM

Quote:

Originally Posted by stsalvage

Can you make the 2 speed slitter work with the Allison

I believe you are referring to a 2-Speed Rear and I've never driven one with an Auto Trans, but I have heard that yes, it is supposed to work.

NoStopN · 02-23-2018, 08:05 PM

Quote:

Originally Posted by stsalvage

So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove

Can you make the 2 speed slitter work with the Allison

It's just personal choice. A factory 6.0 LS (364 cubic in.) is only rated for 380 lb.-ft. of torque. That's more than most engines from the '60s, but even the earliest Duramax makes around 500 lb.-ft. Honestly, I can't speak as to what would fit with a split rear end, but you could attempt to contact Advanced Adapters. They claim they make the widest selection of adapters. Even if they would help on that kind of project, you (or whomever) would be the first ones to do it. You might have better luck getting an adapter made for mating the Duramax to a manual transmission that can handle the torque. You can take all of this talk into consultation, because I really know very little about trucks larger than a C30/GMC 3500.

Dannny B · 02-23-2018, 09:59 PM

Quote:

Originally Posted by C10 - C90 Bill

I believe you are referring to a 2-Speed Rear and I've never driven one with an Auto Trans, but I have heard that yes, it is supposed to work.

I played mix-an-match with a 392, 4 Bbl IH and an Allison in a truck with an Eaton 2 speed axle.. Just back off a tiny bit and shift. It wokled fine.

5Tractorguy · 02-25-2018, 12:29 PM

I can't get enough of this one...

https://syracuse.craigslist.org/cto/...492479895.html

Name: 00P0P_j5tKbCYNE6u_1200x900.jpg
Views: 867
Size: 49.2 KB

C10 - C90 Bill · 02-25-2018, 01:26 PM

I believe that truck has the 503 in it.

sweetk30 · 02-25-2018, 07:10 PM

1hr ish east of me also .

b454rat · 02-25-2018, 09:36 PM

Bout 20-25 minutes from me.....

5Tractorguy · 03-01-2018, 07:30 PM

Another one!!

https://norfolk.craigslist.org/cto/d...498097144.html

Name: 00m0m_kYbOqgYUIaV_1200x900.jpg
Views: 777
Size: 52.9 KB

5Tractorguy · 03-05-2018, 08:56 AM

A nice B series.

https://chicago.craigslist.org/nch/c...482890825.html

Name: 01515_5pPYGDSC8Ja_600x450.jpg
Views: 650
Size: 29.7 KB

C10 - C90 Bill · 03-05-2018, 09:47 AM

Interesting truck.

Sheet Metal is pretty nice.

sweetk30 · 03-05-2018, 11:06 AM

top of windshield frame hand top of a-pillers have some crusty rust showing . . . i know it can be fixed but there is some major work .

does look fairly solid otherwise for sure.

5Tractorguy · 03-07-2018, 05:42 PM

A beautiful '48 GMC

https://cleveland.craigslist.org/cto...501645077.html

Name: 00n0n_2KnUYrLaLwK_1200x900.jpg
Views: 731
Size: 53.3 KB

83GMCK2500 · 03-07-2018, 06:54 PM

Quote:

Originally Posted by 5Tractorguy

A beautiful '48 GMC

https://cleveland.craigslist.org/cto...501645077.html

Attachment 1760532

Holy crap. That's a show truck...

Must save all of the pics.

*Peanutbutter* · 03-07-2018, 09:42 PM

WOW, what a piece of history, gotta grab all the pics before their gone.

jumpsoffrock · 03-08-2018, 03:18 PM

That is one of the few trucks I can say has a very honest price.

02-21-2018, 03:00 PM	#426
83GMCK2500 Registered User Join Date: Sep 2009 Location: Beaverton, OR from WA State Posts: 1,515	Re: The Ulitmate Craigslist find thread That thing has got a heavy front axle, wow! It's near me...if only I had someplace to park it...that chassis has rollback or ramp truck written on it to me. __________________ Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96

02-21-2018, 03:50 PM	#427
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: The Ulitmate Craigslist find thread I agree, it would make a nice Rollback. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

02-21-2018, 04:04 PM	#428
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: The Ulitmate Craigslist find thread Trucks like these are begging for a 6.0 with the Allison 6-9 speed auto and use the splitter rear end.I hate seeing these trucks waist away.I hope in the next few years i can buy a few and stick the 6.0 with the auto and make them worth driving again with new power steering and hydro boost power brakes.These trucks can be Re engineered for long term use.Removing the gas take and putting a fuel sell on the side of the truck Update all the running gear.you have a truck that will get good gas mileage plus it will be a dream to drive

02-21-2018, 08:20 PM	#429
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: The Ulitmate Craigslist find thread I wouldn't stick with a gas engine for something like that LCF. A project like it would need a new engine, so I'd try to find a Duramax V8 with an Allison. __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

02-21-2018, 08:37 PM	#430
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: The Ulitmate Craigslist find thread Even when I'm not looking for parts for my truck, I keep finding more trucks. And why do I always find the flatbeds? https://atlanta.craigslist.org/eat/c...501537539.html The no title situation always scares me. __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

02-21-2018, 08:56 PM	#431
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: The Ulitmate Craigslist find thread I've got a different idea for the LCF, lol. A 4-53T Detroit with a 10-Speed Road Ranger. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

02-21-2018, 09:26 PM	#432
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: The Ulitmate Craigslist find thread So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove Can you make the 2 speed slitter work with the Allison

02-25-2018, 12:29 PM	#439
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread I can't get enough of this one... https://syracuse.craigslist.org/cto/...492479895.html __________________ Jake 5Tractorguy on Youtube

02-25-2018, 01:26 PM	#440
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: The Ulitmate Craigslist find thread I believe that truck has the 503 in it. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

02-25-2018, 07:10 PM	#441
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: The Ulitmate Craigslist find thread 1hr ish east of me also . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

02-25-2018, 09:36 PM	#442
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,464	Re: The Ulitmate Craigslist find thread Bout 20-25 minutes from me..... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

03-01-2018, 07:30 PM	#443
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread Another one!! https://norfolk.craigslist.org/cto/d...498097144.html __________________ Jake 5Tractorguy on Youtube

03-05-2018, 08:56 AM	#444
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread A nice B series. https://chicago.craigslist.org/nch/c...482890825.html __________________ Jake 5Tractorguy on Youtube

03-05-2018, 09:47 AM	#445
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,082	Re: The Ulitmate Craigslist find thread Interesting truck. Sheet Metal is pretty nice. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

03-05-2018, 11:06 AM	#446
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: The Ulitmate Craigslist find thread top of windshield frame hand top of a-pillers have some crusty rust showing . . . i know it can be fixed but there is some major work . does look fairly solid otherwise for sure. __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.



Register or Log In To remove these advertisements.

03-07-2018, 05:42 PM	#447
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread A beautiful '48 GMC https://cleveland.craigslist.org/cto...501645077.html __________________ Jake 5Tractorguy on Youtube

03-07-2018, 09:42 PM	#449
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: The Ulitmate Craigslist find thread WOW, what a piece of history, gotta grab all the pics before their gone. Last edited by Peanutbutter; 03-07-2018 at 10:02 PM.

03-08-2018, 03:18 PM	#450
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 960	Re: The Ulitmate Craigslist find thread That is one of the few trucks I can say has a very honest price.

Register or Log In To remove these advertisements.