What is the name of the part between the bumper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AustinBelair · 03-06-2018, 11:30 PM

and the body at the rear? I put a sport bumper on this 87 and I those panels that cover up the brackets. I noticed there is a little bracket mounted that the panels bolt to, I need that too. I cannot find these parts.

I bought the bumper off of a K5 not knowing the brackets will not work on my 1/2 ton truck. That sucks. The outermost brackets work but I don't feel safe knowing there are no middle brackets and NOBODY sells the just the middle brackets that I can find.

sweetk30 · 03-06-2018, 11:37 PM

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=40

didnt look to hard did you ?

i used a suburban bumper on my 2wd with new inner brackets from lmc . no problems at all .

AustinBelair · 03-06-2018, 11:40 PM

Quote:

Originally Posted by sweetk30

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=40

didnt look to hard did you ?

i used a suburban bumper on my 2wd with new inner brackets from lmc . no problems at all .

Gravel shield. Ah I didn't even think of LMC. I try to avoid them but if they are the only ones that have it. I might have to look for used on the brackets.

Thanks man

sweetk30 · 03-06-2018, 11:51 PM

i didnt find used brackets and i dont care much for the lmc crap also . but they fit good and worked . no real rework required .

03-06-2018, 11:30 PM	#1
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 300	What is the name of the part between the bumper and the body at the rear? I put a sport bumper on this 87 and I those panels that cover up the brackets. I noticed there is a little bracket mounted that the panels bolt to, I need that too. I cannot find these parts. I bought the bumper off of a K5 not knowing the brackets will not work on my 1/2 ton truck. That sucks. The outermost brackets work but I don't feel safe knowing there are no middle brackets and NOBODY sells the just the middle brackets that I can find. __________________ My mother is a recent cancer survivor and this truck build is for her

03-06-2018, 11:37 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: What is the name of the part between the bumper http://www.lmctruck.com/icatalog/cc/full.aspx?Page=40 didnt look to hard did you ? i used a suburban bumper on my 2wd with new inner brackets from lmc . no problems at all . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

03-06-2018, 11:51 PM	#4
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: What is the name of the part between the bumper i didnt find used brackets and i dont care much for the lmc crap also . but they fit good and worked . no real rework required . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.