GA WTB Blower Motor Vent Hose - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Wgesnerjr** · 03-27-2018, 10:25 AM

WTB Blower Motor Vent Hose

I had one of these but cannot find it since I took truck apart. It is the molded vent hose that goes from the blower motor itself to the blower case. It is bent in a 90 degree and has a slotted grommet to fit into the motor. Routes some of the air flow back to the blower motor for cooling, I guess.

Also, while I'm asking...I need at least TWO screws and clip nuts that hold the sun visors to the roof.

Please let me know price and shipping to Atlanta 30044.

Thanks,
Jay

**Wgesnerjr** · 03-31-2018, 09:15 AM

Ttt

rainamy · 04-01-2018, 10:17 AM

Does non ac vs ac make a difference? Might have some of this stuff on a 76 parts truck.

**old Rusty C10** · 04-01-2018, 03:13 PM

I have one for you PM me your address ill give you some clips/screws for the visors too price freeninetynine Happy Easter

cruizin01 · 04-02-2018, 01:04 PM

I'm in need of a hose as well if anyone else has a spare they would sell.

**Ironhorse** · 07-21-2018, 07:04 PM

I see this is an older posting but I think I have one if still needing one, will have to check the parts stash. If I do, it came from a '70 3/4 ton with factory air. Recall it looking a bit different than the one in the pic tho. Will try and find it and get a pic for you.

**Wgesnerjr** · 07-22-2018, 08:49 AM

Thanks Ironhorse,
I got one from OldRustC10.
I appreciate the help,
Jay

**Ironhorse** · 07-22-2018, 09:26 AM

Glad you found what you needed. Sometimes it's those little things that just don't seem to be reproduced and originals are hard to find.

03-27-2018, 10:25 AM	#1
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	WTB Blower Motor Vent Hose WTB Blower Motor Vent Hose I had one of these but cannot find it since I took truck apart. It is the molded vent hose that goes from the blower motor itself to the blower case. It is bent in a 90 degree and has a slotted grommet to fit into the motor. Routes some of the air flow back to the blower motor for cooling, I guess. Also, while I'm asking...I need at least TWO screws and clip nuts that hold the sun visors to the roof. Please let me know price and shipping to Atlanta 30044. Thanks, Jay __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

03-31-2018, 09:15 AM	#2
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: WTB Blower Motor Vent Hose Ttt __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

04-01-2018, 10:17 AM	#3
rainamy Registered User Join Date: Jul 2014 Location: Rockdale Co. GA Posts: 164	Re: WTB Blower Motor Vent Hose Does non ac vs ac make a difference? Might have some of this stuff on a 76 parts truck.

04-01-2018, 03:13 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	Re: WTB Blower Motor Vent Hose I have one for you PM me your address ill give you some clips/screws for the visors too price freeninetynine Happy Easter Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! Last edited by old Rusty C10; 04-01-2018 at 03:23 PM.

04-02-2018, 01:04 PM	#5
cruizin01 Registered User Join Date: Mar 2016 Location: Cbus, Ohio Posts: 290	Re: WTB Blower Motor Vent Hose I'm in need of a hose as well if anyone else has a spare they would sell. __________________ '78 C10 Build

07-21-2018, 07:04 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,300	Re: WTB Blower Motor Vent Hose I see this is an older posting but I think I have one if still needing one, will have to check the parts stash. If I do, it came from a '70 3/4 ton with factory air. Recall it looking a bit different than the one in the pic tho. Will try and find it and get a pic for you. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-22-2018, 08:49 AM	#7
Wgesnerjr Senior Member Join Date: Jun 2015 Location: Atlanta, GA. Posts: 737	Re: WTB Blower Motor Vent Hose Thanks Ironhorse, I got one from OldRustC10. I appreciate the help, Jay __________________ Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project

07-22-2018, 09:26 AM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,300	Re: WTB Blower Motor Vent Hose Glad you found what you needed. Sometimes it's those little things that just don't seem to be reproduced and originals are hard to find. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.