Please Name That Part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gdub310 · 05-23-2018, 12:49 PM

I was using the impact to remove the cab mounts on my 1973 C20 and in the dust and crust on the garage floor underneath the passenger side footwell mount, I also found the part pictured below (two different views of the same part).

It's not piece of the mount bushing. Is it a front end part jarred loose when I was working on the cab mounts? Something else that coincidentally dropped off my truck? Or a stowaway that went for a ride in the innards of my truck but doesn't actually belong there? Any help would be appreciated...

100%Chevy · 05-23-2018, 01:09 PM

Looks like the nut that goes on a full floating rear axle.
Mike.

Gdub310 · 05-23-2018, 02:52 PM

Quote:

Originally Posted by 100%Chevy

Looks like the nut that goes on a full floating rear axle.
Mike.

Looking at the diagram of the hub and drum for the 14-bolt/10.5" axle, I don't see anything that looks like the part I found. Here's the diagram: https://i.imgur.com/GkRYRqI.jpg

Killer Bee · 05-23-2018, 03:20 PM

not super familiar with automotive sizes of these types of parts, but sure does look like a spindle nut of some kind to me..

notches and reliefs cut into them are for tools like these.. a little easier to make consistent bearing adjustments than channel locks..

as for the one in the op, looks to have a hex shaped flange to make adjustments..

here's a sample of a 14 bolt FF nut I found quickly googling that does look similar..

may belong to an altogether different make / model / year vehicle considering where it was..

good luck!

**3757chevy** · 05-23-2018, 05:00 PM

F@rd explorer or bronco II or ranger front. Napa NOE 635-1106.

Gdub310 · 05-23-2018, 05:39 PM

Quote:

Originally Posted by 3757chevy

F@rd explorer or bronco II or ranger front. Napa NOE 635-1106.

Yup - looks like you nailed it! https://www.amazon.com/Motormite-139.../dp/B001HZICZC

Thank you, I really appreciate it. I can rest assured that it's not from my truck. It must have been a hitchhiker; debris kicked up into the fender area or frame and finally dislodged when I was doing my work.

Killer Bee · 05-23-2018, 05:49 PM

yep, looking like yer truck stepped in some ferd poop

**TKCR** · 05-23-2018, 07:42 PM

Quote:

Originally Posted by Killer Bee

yep, looking like yer truck stepped in some ferd poop

Man With A Gun · 05-26-2018, 01:13 AM

I will name it Gary.

**3757chevy** · 05-26-2018, 01:21 AM

jkk · 05-27-2018, 10:25 AM

Good guess

05-23-2018, 12:49 PM	#1
Gdub310 Registered User Join Date: Dec 2017 Location: Los Angeles, California Posts: 20	Please Name That Part I was using the impact to remove the cab mounts on my 1973 C20 and in the dust and crust on the garage floor underneath the passenger side footwell mount, I also found the part pictured below (two different views of the same part). It's not piece of the mount bushing. Is it a front end part jarred loose when I was working on the cab mounts? Something else that coincidentally dropped off my truck? Or a stowaway that went for a ride in the innards of my truck but doesn't actually belong there? Any help would be appreciated...

05-23-2018, 01:09 PM	#2
100%Chevy Registered User Join Date: Jun 2008 Location: Moss Point,Ms. Posts: 1,439	Re: Please Name That Part Looks like the nut that goes on a full floating rear axle. Mike.

05-23-2018, 03:20 PM	#4
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,809	Re: Please Name That Part not super familiar with automotive sizes of these types of parts, but sure does look like a spindle nut of some kind to me.. notches and reliefs cut into them are for tools like these.. a little easier to make consistent bearing adjustments than channel locks.. as for the one in the op, looks to have a hex shaped flange to make adjustments.. here's a sample of a 14 bolt FF nut I found quickly googling that does look similar.. may belong to an altogether different make / model / year vehicle considering where it was.. good luck! __________________ *I started out with nothing - and I still have most of it*

05-23-2018, 05:00 PM	#5
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,060	Re: Please Name That Part F@rd explorer or bronco II or ranger front. Napa NOE 635-1106. __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

05-23-2018, 05:49 PM	#7
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,809	Re: Please Name That Part yep, looking like yer truck stepped in some ferd poop __________________ *I started out with nothing - and I still have most of it*

05-26-2018, 01:13 AM	#9
Man With A Gun Registered User Join Date: Apr 2015 Location: Northwest Florida Posts: 287	Re: Please Name That Part I will name it Gary. __________________ 77 Chevy K20 Longbed 86 GMC C3500 Dually 07 Silverado 2500HD All standard cabs

05-26-2018, 01:21 AM	#10
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,060	Re: Please Name That Part __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

05-27-2018, 10:25 AM	#11
jkk Registered User Join Date: Aug 2017 Location: Texas Posts: 423	Re: Please Name That Part Good guess



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.