1966 c10 mirror location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rvrfoot · 05-26-2018, 10:06 PM

I got repos doors. I did not look at my old doors before i sold them. I need to know the measurement to the center of the bolts?

LostMy65 · 05-26-2018, 10:56 PM

Quote:

Originally Posted by rvrfoot

I got repos doors. I did not look at my old doors before i sold them. I need to know the measurement to the center of the bolts?

I think a template was posted here in these forums.
I'll see if I can find it.

LostMy65 · 05-26-2018, 11:02 PM

I guess it was for a 61-63:
http://67-72chevytrucks.com/vboard/s...ghlight=Mirror
I'll keep looking.

**The Rocknrod** · 05-27-2018, 06:53 AM

Hi rvrfoot, the only thread I can find on that you already posted on last year.

http://67-72chevytrucks.com/vboard/s...d.php?t=685694
It's the actual measurements of the holes is what you need. If you have time I can make a template and send it to you of the drivers door, then just transfer to the passenger when ready. I don't have my door mirror on yet.

**The Rocknrod** · 05-27-2018, 09:09 AM

Sent you a PM.

rvrfoot · 05-27-2018, 10:10 AM

Sent back thanks.

DLW · 05-27-2018, 06:07 PM

Can you send me that as well please?
PO welded all the holes up for my driver side door so I can't copy anything over either.

Thanks,
Dan

TopFuel1966 · 05-27-2018, 07:02 PM

There should be a triangular shaped reinforcement with 3 captive nuts spot welded to the inside of your drivers side door where the mirror mounts. Try to use that to recover your holes for the correct location.

**The Rocknrod** · 05-27-2018, 08:17 PM

You'll have to get rvrfoot to send it after I send it to him.

rvrfoot · 05-27-2018, 09:53 PM

Quote:

Originally Posted by The Rocknrod

You'll have to get rvrfoot to send it after I send it to him.

Thanks, I will send it to him after i am done.

Macdaddy1 · 05-27-2018, 10:15 PM

I to need the template as I recently had to purchase new doors and need to mark the mirror holes.

Pat

Macdaddy1 · 05-27-2018, 10:26 PM

That would be great.

rvrfoot · 05-27-2018, 10:38 PM

Quote:

Originally Posted by Macdaddy1

I to need the template as I recently had to purchase new doors and need to mark the mirror holes.

Pat

Sorry i ment dlw.

ImpalaJim · 05-28-2018, 08:45 AM

Quote:

Originally Posted by TopFuel1966

There should be a triangular shaped reinforcement with 3 captive nuts spot welded to the inside of your drivers side door where the mirror mounts. Try to use that to recover your holes for the correct location.

reproduction doors do not have that!!

TopFuel1966 · 05-28-2018, 12:48 PM

Quote:

Originally Posted by ImpalaJim

reproduction doors do not have that!!

I'm sure that repro doors don't, but DLW mentioned that a PO had filled in the holes in his doors.

DLW · 05-28-2018, 05:26 PM

You might be right about the stock nuts still being there on my truck, although welded over. I will keep that in mind to make a template from inside the door if possible. If this template Rocknrod made is accurate though, it might be nice to have and easy to make more of them. Surprised there is no template out there yet for 64-66. I think we need to find a way to get that template, or another one like it, in PDF that prints in real size so you don't have to physically mail it around.

rvrfoot · 06-01-2018, 08:57 PM

Quote:

Originally Posted by The Rocknrod

Sent you a PM.

Got it today thanks.

05-26-2018, 10:06 PM	#1
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	1966 c10 mirror location I got repos doors. I did not look at my old doors before i sold them. I need to know the measurement to the center of the bolts?

05-26-2018, 11:02 PM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: 1966 c10 mirror location I guess it was for a 61-63: http://67-72chevytrucks.com/vboard/s...ghlight=Mirror I'll keep looking. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

05-27-2018, 06:53 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1966 c10 mirror location Hi rvrfoot, the only thread I can find on that you already posted on last year. http://67-72chevytrucks.com/vboard/s...d.php?t=685694 It's the actual measurements of the holes is what you need. If you have time I can make a template and send it to you of the drivers door, then just transfer to the passenger when ready. I don't have my door mirror on yet. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-27-2018, 09:09 AM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1966 c10 mirror location Sent you a PM. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-27-2018, 10:10 AM	#6
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: 1966 c10 mirror location Sent back thanks.

05-27-2018, 06:07 PM	#7
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: 1966 c10 mirror location Can you send me that as well please? PO welded all the holes up for my driver side door so I can't copy anything over either. Thanks, Dan

05-27-2018, 07:02 PM	#8
TopFuel1966 Registered User Join Date: Jul 2009 Location: Menifee, CA Posts: 471	Re: 1966 c10 mirror location There should be a triangular shaped reinforcement with 3 captive nuts spot welded to the inside of your drivers side door where the mirror mounts. Try to use that to recover your holes for the correct location.

05-27-2018, 08:17 PM	#9
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1966 c10 mirror location You'll have to get rvrfoot to send it after I send it to him. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-27-2018, 10:15 PM	#11
Macdaddy1 Registered User Join Date: Dec 2017 Location: Niceville Florida Posts: 347	Re: 1966 c10 mirror location I to need the template as I recently had to purchase new doors and need to mark the mirror holes. Pat

05-27-2018, 10:26 PM	#12
Macdaddy1 Registered User Join Date: Dec 2017 Location: Niceville Florida Posts: 347	Re: 1966 c10 mirror location That would be great.

05-28-2018, 05:26 PM	#16
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: 1966 c10 mirror location You might be right about the stock nuts still being there on my truck, although welded over. I will keep that in mind to make a template from inside the door if possible. If this template Rocknrod made is accurate though, it might be nice to have and easy to make more of them. Surprised there is no template out there yet for 64-66. I think we need to find a way to get that template, or another one like it, in PDF that prints in real size so you don't have to physically mail it around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.