Cup holder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'70_402** · 05-06-2004, 07:08 PM

I read in a thread a while back that chevy made a factory cup holder for our console's is this true and if so does anyone have pics of one???? (i am tired of holding my drink between my legs.....it messes with my heavy foot!)

Thanks

Rick

Longhorn Man · 05-06-2004, 07:17 PM

Look in a later model full sized blazer...I think they started in 77 or so. This will replace your seatbeld holder.
I keep my drink on the dash, you'd be amazed at how good it does...onless you launch from the stop light, I did this once (OK...more than once) and ended up smellin like Dew.

crazy longhorn · 05-06-2004, 07:48 PM

Cool holder Andy, but it wouldnt work for me.....about the time I nailed 2nd gear, my Badwieser would be all over the back window!.....or a cop would see it (yikes)

crazyL

Longhorn Man · 05-06-2004, 08:52 PM

Yeah, I think nailing it into 2nd could count as launching.

crazy longhorn · 05-06-2004, 09:18 PM

Quote:

Originally Posted by Longhorn Man

Yeah, I think nailing it into 2nd could count as launching.

not only that, its alcohol abuse when I spill the Badweiser

Bill72BB · 05-06-2004, 09:40 PM

I use this one it gets in the way of the radio when you have drinks in it but you get used to it works grest ,replaces the ash tray.

**'68OrangeSunshine** · 05-07-2004, 04:45 AM

Does it clear the shifter? I've got a 4-speed muncie 465 and the stick is tall.

Huck · 05-07-2004, 08:28 AM

Any blazer 73 and up will have the cup holding console. But you have to have a truck with bucket seats. If you have an automatic truck, lots of small floor or seat consoles available with cup holders.

gr8scott51 · 05-07-2004, 09:53 AM

I mounted one from an 88 - 95 Chev under the dash. Works great, clears my 5 speed. Do a search, you should find pics.

**'70_402** · 05-07-2004, 10:19 AM

Do i have to chage out the console or is it a removable and transplantable holder? if not then i am going to get a center floor aftermarket console/cup holder....

gr8scott51 · 05-07-2004, 01:29 PM

Mine has nothing to do with the console (if you're talking to me).

**'70_402** · 05-07-2004, 03:17 PM

I was refering to the 73 and up blazer console but i would like to see some pics of yours....i searched and found nothing (i think i am searching right..) anyways, if you had some pics that would be great.

Thanks

Rick

gr8scott51 · 05-07-2004, 05:13 PM

I guess they got deleted by the board mods. I'll take one tonite.

1970blazin · 05-07-2004, 06:17 PM

Here is a pic of the cupholder console. The cupholder part comes out, but the seatbelt type holder console that was used in the earlier trucks/blazer doesn't have that part as removable. Hope that makes some sense.

**john** · 05-07-2004, 06:59 PM

I have an aftermarket console that had the seatbelt holders. What I did was remove that part and make an aluminum plate, I think it was 16ga. and use the universal cupholders. I had about a 1/4" lip which I used silicon adhesive to attach the plate with. Anyhow it was a cheap way to get cupholders. John

gr8scott51 · 05-07-2004, 07:42 PM

sorry about the quality of my camera (still from video cam).

Longhorn Man · 05-07-2004, 11:04 PM

Huck, the 73 blazers still used the exact same console as the 69 - 72 did, it wasn't untill later that they went to the cup holders.

05-06-2004, 07:08 PM	#1
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	Cup holder I read in a thread a while back that chevy made a factory cup holder for our console's is this true and if so does anyone have pics of one???? (i am tired of holding my drink between my legs.....it messes with my heavy foot!) Thanks Rick __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

05-06-2004, 07:17 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Look in a later model full sized blazer...I think they started in 77 or so. This will replace your seatbeld holder. I keep my drink on the dash, you'd be amazed at how good it does...onless you launch from the stop light, I did this once (OK...more than once) and ended up smellin like Dew. Attached Images

05-06-2004, 07:48 PM	#3
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Cool holder Andy, but it wouldnt work for me.....about the time I nailed 2nd gear, my Badwieser would be all over the back window!.....or a cop would see it (yikes) crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

05-06-2004, 09:40 PM	#6
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	I use this one it gets in the way of the radio when you have drinks in it but you get used to it works grest ,replaces the ash tray. Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

05-07-2004, 04:45 AM	#7
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,510	Does it clear the shifter? I've got a 4-speed muncie 465 and the stick is tall. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-06-2004, 08:52 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Yeah, I think nailing it into 2nd could count as launching.

05-07-2004, 08:28 AM	#8
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Console cup holders Any blazer 73 and up will have the cup holding console. But you have to have a truck with bucket seats. If you have an automatic truck, lots of small floor or seat consoles available with cup holders.

05-07-2004, 09:53 AM	#9
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	I mounted one from an 88 - 95 Chev under the dash. Works great, clears my 5 speed. Do a search, you should find pics. __________________ Silence is golden, duct tape is silver. - Scott

05-07-2004, 10:19 AM	#10
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	Do i have to chage out the console or is it a removable and transplantable holder? if not then i am going to get a center floor aftermarket console/cup holder.... __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

05-07-2004, 01:29 PM	#11
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	Mine has nothing to do with the console (if you're talking to me). __________________ Silence is golden, duct tape is silver. - Scott

05-07-2004, 03:17 PM	#12
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	I was refering to the 73 and up blazer console but i would like to see some pics of yours....i searched and found nothing (i think i am searching right..) anyways, if you had some pics that would be great. Thanks Rick __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

05-07-2004, 05:13 PM	#13
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	deleted? I guess they got deleted by the board mods. I'll take one tonite. __________________ Silence is golden, duct tape is silver. - Scott

05-07-2004, 06:17 PM	#14
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Here is a pic of the cupholder console. The cupholder part comes out, but the seatbelt type holder console that was used in the earlier trucks/blazer doesn't have that part as removable. Hope that makes some sense. Attached Images __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

05-07-2004, 06:59 PM	#15
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	I have an aftermarket console that had the seatbelt holders. What I did was remove that part and make an aluminum plate, I think it was 16ga. and use the universal cupholders. I had about a 1/4" lip which I used silicon adhesive to attach the plate with. Anyhow it was a cheap way to get cupholders. John Attached Images __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

05-07-2004, 07:42 PM	#16
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	pic sorry about the quality of my camera (still from video cam). Attached Images __________________ Silence is golden, duct tape is silver. - Scott



Register or Log In To remove these advertisements.

05-07-2004, 11:04 PM	#17
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Huck, the 73 blazers still used the exact same console as the 69 - 72 did, it wasn't untill later that they went to the cup holders.

Register or Log In To remove these advertisements.