![]() |
![]() |
#26 |
Senior Member
![]() Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Seat with headrests
Update:
Stripped the seat bottom down to frame and did a trial fit in truck. The original 85 seat has more depth (knee to butt when sitting on seat) than the 95 junkyard one. So the 85 cushion probably wouldn't have worked either. So my buddy and u decided it was all 95 seat or nothing. Other differences: Not only that but the bottom 95 seat tracks are part of the "stand" where as the 85 is separate. And the 95 seat tracks attach with one bolt at front and rear but the 85 has one bolt at front and two at the rear. Definitely not a drop in mod by any means.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project |
![]() |
![]() |
![]() |
#27 |
Senior Member
![]() Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Seat with headrests
Just for a reference, the 85 seat mounting points in the floorpan are 47" a part, side to side. In order to keep that measurement, I had to "adjust" the rear 85 seat tracks to hit the outer mounting hole on the 95 seat, then drill a new inner rear mounting point and a front mounting point; always measuring to keep the 47" width. Luckily there is a hole pre-punched in the seat track that almost lined up with the frame. The front took a small spacer and an access hole on the other side of the frame but in all, not too much engineering.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project Last edited by Wgesnerjr; 06-24-2018 at 11:12 AM. Reason: Add content |
![]() |
![]() |
![]() |
#28 |
Senior Member
![]() Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Seat with headrests
Then another trial fit and the whole thing was off by 1/2". DOH! Bolting everything in at 46 1/2" bound the entire assembly in place; could not move it forward or back!
After slotting a bunch of holes, I made up the half inch and it passed the final mock up. Then i cut the extra 3" of seat track off the front and fabrication was done. Had to break out the welder and fix two broken factory welds and moved on to the back frame.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project |
![]() |
![]() |
![]() |
#29 |
Senior Member
![]() Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Seat with headrests
Another stroke of luck, my brother-in-law had a set of GM manuals to his 98 and there was the tiniest pic of the seat back hinge assembly.
It took a while and a magnifying glass, but we had the order of parts. We discovered that every washer, bushing and plastic cover is needed for proper operation. So, after 8 hours in the Georgia sun, the design phase is complete. The afternoon ended with my brother-in-law having a mild case of heatstroke, and the frames have gone to my buddy's house for sandblasting and paint. Pretty eventful day. Once the new foam arrives, the frames are painted and my brother-in-law properly hydrated, re-assembly will commence.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project Last edited by Wgesnerjr; 06-24-2018 at 11:10 AM. Reason: Add content |
![]() |
![]() |
![]() |
#30 |
Senior Member
![]() Join Date: Oct 2014
Location: Ohio
Posts: 6,926
|
Re: Seat with headrests
That's a lot of good info. Sound like it's been quite eventful. Glad to hear your brother-in-law is ok.
Speaking from experience, he will be sensitive to heat related issues from here on out.
__________________
FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR |
![]() |
![]() |
![]() |
#31 |
Registered User
Join Date: Oct 2016
Location: Kentucky
Posts: 385
|
Re: Seat with headrests
I have a 60/40 bench seat in mine out of a 90 model or so truck. While mine in particular does not have headrests, some of them do. It sits very comfortable, it actually might even be the most comfy seat I've sat in but I have not driven it very much.
There's a few different ways to mount them. We chopped the sliders OE to the 90 model truck down, as they dont have a hump in the cab floor and this makes the sliders super tall. Then we made a bracket that bolted to the original seat mounting points and mounted the 90 model sliders to that. I hope that helps but it seems you've made quite a lot of progress already!
__________________
1978 Hawaiian Blue GMC 454/Tremec TKO 500 BUILD THREAD |
![]() |
![]() |
![]() |
#32 |
Senior Member
![]() Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Seat with headrests
I do hope this is comfortable. I really liked the rebuilt 85 seat but this should help.
New seat foam. Used the link to the eBay auction and bought it. Arrived last night. Looks exactly like the original 95 one, only much more sanitary.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project |
![]() |
![]() |
![]() |
#33 |
Senior Member
![]() Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Seat with headrests
Also, if it's ever needed, here is a better diagram of the seat hinge hardware.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project |
![]() |
![]() |
![]() |
Bookmarks |
|
|