'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... - Page 99 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Rickysnickers** · 06-10-2018, 11:13 PM

You've done a fantastic job!

Frizzle Fry · 06-13-2018, 08:57 PM

Thanks, everyone! It's so good to see it back in the ground and coming together.

I have some bad news though. After taking it around the neighborhood a couple times and on one slightly longer excursion to drop my son off at the light rail station I was ready to film it driving. My wife filmed the startup and it barely started, idled rough, then died

I've spent the last few days troubleshooting it in my spare time. I'm convinced something went bad in the AEM EMS (1052). Unfortunately, it's so old that AEM doesn't support it anymore. So I ordered up their latest and greatest AEM Infinity EMS with F20C wiring harness. It'll be here tomorrow. Fingers crossed..

Frizzle Fry · 06-14-2018, 06:08 PM

We’re back in action with a new AEM Infinity! The issue was not the ecu though �� The plugs were fouled. Probably from the old ecu just not being tuned.. Scheduling a tune ASAP

Frizzle Fry · 06-29-2018, 10:05 AM

She’s on the road boys and girls! Been to Portland Cars and Coffee twice now!! Couldn’t be happier with the performance and it’s not even tuned yet!
Posted via Mobile Device

Frizzle Fry · 06-29-2018, 10:17 AM

Images-

Frizzle Fry · 06-29-2018, 10:20 AM

Pics-

Frizzle Fry · 06-29-2018, 10:22 AM

Photos-

Southcity · 06-29-2018, 11:38 AM

HUGE Congrats are in order!! I can't say enough nice things about how great the car looks. Keep us posted as you get it tuned and perhaps we can get a video one day when you take it around the Nurburgring.

**Palf70Step** · 06-29-2018, 05:55 PM

Very nice! Excellent work.

Is the Burb/Tahoe back on the list for completion?

ajgriffin · 06-29-2018, 09:31 PM

Awesome work Frizz! Hope you're enjoying the fruits of your labor! Show us a vid when you get the time

**Rickysnickers** · 06-30-2018, 10:32 AM

Top notch!!! Wish I had your talents!

FRENCHBLUE72 · 07-01-2018, 08:34 AM

Congrats bud

knomadd · 07-03-2018, 10:16 AM

Looks great! Good job sir!

Twisted78SS · 07-03-2018, 12:53 PM

Mike..
Given the PermaGrin i am sure your still wearin, I think the new name should be FUNBEAM!!

Hope to see you both before the summer gets away.. As many have said, you pulled off an incredible performance here and should be extremely proud!

nitroracer · 07-08-2018, 10:03 PM

I've been watching this build since Day 1 and I'm glad you've finally got the car finished and driving! Its an amazing build!

Zoomin · 07-08-2018, 10:24 PM

Turned out awesome! Would love to see it firsthand someday

dhaymaker · 07-09-2018, 10:10 AM

I've been following your build from the day it was on the trailer. I must say I'm impressed with your build skills, your dedication to seeing the task to its end, and the fantastic final results. Thank you for sharing the ride with us!!

**Ol Blue K20** · 07-09-2018, 10:53 AM

Wow! It is absolutely beautiful. Nice job

67ChevyRedneck · 07-10-2018, 10:54 AM

Awesome!!!

Frizzle Fry · 07-13-2018, 05:57 AM

Quote:

Originally Posted by Southcity

HUGE Congrats are in order!! I can't say enough nice things about how great the car looks. Keep us posted as you get it tuned and perhaps we can get a video one day when you take it around the Nurburgring.

Thanks man! Nurburgring would be a dream! I'll definitely get some vids together for you guys after I get back from another business trip.

Quote:

Originally Posted by Palf70Step

Very nice! Excellent work.

Is the Burb/Tahoe back on the list for completion?

Thanks Palf! The Tahoe is definitely getting some love in order to make it more marketable. But between us, knowing myself I will probably get hooked on it again and take it further into uncharted territory. I need a new creative outlet after "finishing" the Funbeam

Quote:

Originally Posted by ajgriffin

Awesome work Frizz! Hope you're enjoying the fruits of your labor! Show us a vid when you get the time

Thank yo! Vids are definitely in order!

Quote:

Originally Posted by Rickysnickers

Top notch!!! Wish I had your talents!

Thanks Ricky! I'm just cultivating skills as I go!

Quote:

Originally Posted by FRENCHBLUE72

Congrats bud

Thank you Frenchy

Quote:

Originally Posted by knomadd

Looks great! Good job sir!

Much appreciated Knomadd

Quote:

Originally Posted by nitroracer

I've been watching this build since Day 1 and I'm glad you've finally got the car finished and driving! Its an amazing build!

Thanks Nitro! It was a long ride but it was totally worth it! The thing is crazy fun to drive and gets so many thumbs up and looks and smiles.

Quote:

Originally Posted by Twisted78SS

Mike..
Given the PermaGrin i am sure your still wearin, I think the new name should be FUNBEAM!!

Hope to see you both before the summer gets away.. As many have said, you pulled off an incredible performance here and should be extremely proud!

Funbeam it is! I like it

I've registered it for the Portland All British Field Meet in September (scroll down to see the Funbeam registered pic).

Quote:

Originally Posted by Zoomin

Turned out awesome! Would love to see it firsthand someday

Thanks Zoomin! You're welcome to come see it any time!

Quote:

Originally Posted by dhaymaker

I've been following your build from the day it was on the trailer. I must say I'm impressed with your build skills, your dedication to seeing the task to its end, and the fantastic final results. Thank you for sharing the ride with us!!

Thanks for sticking with me through the loooooong build full of scope drift!

Quote:

Originally Posted by Ol Blue K20

Wow! It is absolutely beautiful. Nice job

Thank you Sir!

Quote:

Originally Posted by 67ChevyRedneck

Awesome!!!

jeffg1010 · 07-19-2018, 10:05 AM

Man, I've followed this thread for years. Noticed a bump in posts so I had to tune in. Congrats on getting it road worthy. I milestone for any gearhead.

CG · 08-12-2018, 07:08 PM

Congrats (yeah Im slow to the party) such a great little car. I think a sliding ragtop should be the next addition to that thing =)

dammitmitchell · 08-20-2018, 07:35 PM

holy hell.
this is like watching one of our own nephews or nieces grow.
whats next on it buddy?

jkeating1 · 11-09-2018, 11:07 PM

Quick question regarding post 32 (waaaay back there): "I had the axles reworked at Dutchman's to fit the S2000 rotors. They are 5x4.5" and just happen to be the same pattern as the wheels you may have noticed in some of the previous pics. While at Dutchman's I had new bearings and retainers pressed on."

Did that mean to say, "...had the S2000 rotors reworked to fit the axles"? I'm looking at doing a similar retrofit, and it looks like the rotors were re-drilled to the existing pattern of the DJ-5. And are DJ's 5x4.5 stock (smaller than CJ's 5x5), or is that what was reworked?

Frizzle Fry · 03-30-2019, 03:14 AM

Huuuuge gap in posting (winter happened).

Quote:

Originally Posted by jeffg1010

Man, I've followed this thread for years. Noticed a bump in posts so I had to tune in. Congrats on getting it road worthy. I milestone for any gearhead.

I appreciate it! Now I just need to close all the small details...

Quote:

Originally Posted by CG

Congrats (yeah Im slow to the party) such a great little car. I think a sliding ragtop should be the next addition to that thing =)

That would be next level.

Quote:

Originally Posted by dammitmitchell

holy hell.
this is like watching one of our own nephews or nieces grow.
whats next on it buddy?

Haha, yeh. I don’t know. Whatever strikes inspiration when there’s a cash surplus problem

Quote:

Originally Posted by jkeating1

Quick question regarding post 32 (waaaay back there): "I had the axles reworked at Dutchman's to fit the S2000 rotors. They are 5x4.5" and just happen to be the same pattern as the wheels you may have noticed in some of the previous pics. While at Dutchman's I had new bearings and retainers pressed on."

Did that mean to say, "...had the S2000 rotors reworked to fit the axles"? I'm looking at doing a similar retrofit, and it looks like the rotors were re-drilled to the existing pattern of the DJ-5. And are DJ's 5x4.5 stock (smaller than CJ's 5x5), or is that what was reworked?

Axles were reworked to fit the s2000 rotors as written. The reason for this was to allow me to use factory or aftermarket S2000 parts for most of the mechanical gear.

I took it out for a spin with my copilot today.

06-10-2018, 11:13 PM	#2451
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,026	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... You've done a fantastic job!

06-13-2018, 08:57 PM	#2452
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Thanks, everyone! It's so good to see it back in the ground and coming together. I have some bad news though. After taking it around the neighborhood a couple times and on one slightly longer excursion to drop my son off at the light rail station I was ready to film it driving. My wife filmed the startup and it barely started, idled rough, then died I've spent the last few days troubleshooting it in my spare time. I'm convinced something went bad in the AEM EMS (1052). Unfortunately, it's so old that AEM doesn't support it anymore. So I ordered up their latest and greatest AEM Infinity EMS with F20C wiring harness. It'll be here tomorrow. Fingers crossed..

06-14-2018, 06:08 PM	#2453
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... We’re back in action with a new AEM Infinity! The issue was not the ecu though �� The plugs were fouled. Probably from the old ecu just not being tuned.. Scheduling a tune ASAP

06-29-2018, 10:17 AM	#2455
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Images- Attached Images

06-29-2018, 10:20 AM	#2456
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Pics- Attached Images

06-29-2018, 10:05 AM	#2454
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	She’s on the road boys and girls! Been to Portland Cars and Coffee twice now!! Couldn’t be happier with the performance and it’s not even tuned yet! Posted via Mobile Device

06-29-2018, 10:22 AM	#2457
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Photos- Attached Images

06-29-2018, 11:38 AM	#2458
Southcity Registered User Join Date: Aug 2007 Location: Redwood City, CA Posts: 1,177	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... HUGE Congrats are in order!! I can't say enough nice things about how great the car looks. Keep us posted as you get it tuned and perhaps we can get a video one day when you take it around the Nurburgring. __________________ 66 GMC Suburban Custom 66 Chevy K10 Suburban

06-29-2018, 05:55 PM	#2459
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,085	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Very nice! Excellent work. Is the Burb/Tahoe back on the list for completion? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-29-2018, 09:31 PM	#2460
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Awesome work Frizz! Hope you're enjoying the fruits of your labor! Show us a vid when you get the time __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

06-30-2018, 10:32 AM	#2461
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,026	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Top notch!!! Wish I had your talents!

07-01-2018, 08:34 AM	#2462
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Congrats bud __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-03-2018, 10:16 AM	#2463
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Looks great! Good job sir! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

07-03-2018, 12:53 PM	#2464
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Mike.. Given the PermaGrin i am sure your still wearin, I think the new name should be FUNBEAM!! Hope to see you both before the summer gets away.. As many have said, you pulled off an incredible performance here and should be extremely proud! __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

07-08-2018, 10:03 PM	#2465
nitroracer Registered User Join Date: Feb 2008 Location: Nottingham, Pa Posts: 7	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I've been watching this build since Day 1 and I'm glad you've finally got the car finished and driving! Its an amazing build!



Register or Log In To remove these advertisements.

07-08-2018, 10:24 PM	#2466
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Turned out awesome! Would love to see it firsthand someday __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

07-09-2018, 10:10 AM	#2467
dhaymaker Registered User Join Date: Jan 2006 Location: Peyton, CO Posts: 448	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I've been following your build from the day it was on the trailer. I must say I'm impressed with your build skills, your dedication to seeing the task to its end, and the fantastic final results. Thank you for sharing the ride with us!! __________________ don "The DRBMan" 2014 Audi A4 (The Wife's Daily Driver) 2017 HD Ultra (The Cruiser) 2003 HD Fatboy (The Ride) 2001 Chevy Suburban (Another back up!!) For the first time in forever, not a single 67-72 Chevy truck, Blazer, or Suburban on the property! Basically retired and getting the new Motorhome ready for some traveling. Doing a bit of work on the house getting it ready to sell! LOL!!

07-09-2018, 10:53 AM	#2468
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Wow! It is absolutely beautiful. Nice job __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

07-10-2018, 10:54 AM	#2469
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Awesome!!! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-19-2018, 10:05 AM	#2471
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Man, I've followed this thread for years. Noticed a bump in posts so I had to tune in. Congrats on getting it road worthy. I milestone for any gearhead. __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

08-12-2018, 07:08 PM	#2472
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,993	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Congrats (yeah Im slow to the party) such a great little car. I think a sliding ragtop should be the next addition to that thing =)

08-20-2018, 07:35 PM	#2473
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... holy hell. this is like watching one of our own nephews or nieces grow. whats next on it buddy? __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

11-09-2018, 11:07 PM	#2474
jkeating1 Registered User Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Quick question regarding post 32 (waaaay back there): "I had the axles reworked at Dutchman's to fit the S2000 rotors. They are 5x4.5" and just happen to be the same pattern as the wheels you may have noticed in some of the previous pics. While at Dutchman's I had new bearings and retainers pressed on." Did that mean to say, "...had the S2000 rotors reworked to fit the axles"? I'm looking at doing a similar retrofit, and it looks like the rotors were re-drilled to the existing pattern of the DJ-5. And are DJ's 5x4.5 stock (smaller than CJ's 5x5), or is that what was reworked? Last edited by jkeating1; 11-09-2018 at 11:14 PM.

Register or Log In To remove these advertisements.