trans/transfer, Front clip, Locker rearend for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

griesel72 · 05-11-2004, 04:11 PM

sm465/205 combo (out of a 71 chevy K20) for sale ($100 - truck was not running, but seems tight)

Also have the complete pedal package/linkage, if interested

Also have a 70 front clip, some rust, but not rusted out, missing hood and inner grill ($100)

I also have a locker rearend, i dont' know anything about it ($50)

Let me know if you need more pics or information
Thanks
David

rambler · 05-11-2004, 04:14 PM

got any more pics of the front clip? hows the other side look?

griesel72 · 05-11-2004, 04:31 PM

Rambler

I'll try to take some more pics tonight.

Thanks
David

**Yukon Jack** · 05-11-2004, 05:12 PM

Are you going to be down the Wichita way anytime soon? I'm interested in the t/c and 4 speed.

TRUCKPOOR · 05-11-2004, 05:17 PM

David, If you could take another closeup pic of that locker and try to find some numbers on it somewhere I'm interested, but only if I go to Kansas for some other parts also. Is it a 6 lug axle? Width from backing plate to backing plate? I will leave a pm with a number where I can be reached this evening after 7:30 mountain. Thanks, Robert

griesel72 · 05-11-2004, 05:57 PM

Rambler,

Here's a couple more pics of the front clip, and grill. The grill is a little bent, but could be fixed pretty easily.

griesel72 · 05-11-2004, 06:01 PM

Mark- I am moving back to Greenwood County the first of this month, and will be traveling to Wichita often (it's the closest place to go for food, etc)

Robert - I'll try to take some more pics now, and look for some numbers, it is a 6 lug, and is set up to have leaf springs, the backing plate to plate measurement is 57 1/2 inches, and the rearend is a 12 bolt. The truck it came in didn't have a motor so i know nothing about it (explains the low price)

thanks
David

griesel72 · 05-11-2004, 06:09 PM

Robert, here are some closer pics, i couldn't find a number on the locker itself
(any idea where i would look?)

Thanks
David

**Yukon Jack** · 05-11-2004, 09:46 PM

I will PM you about the T/C and four speed.

griesel72 · 05-11-2004, 09:53 PM

back at you Yukon

Thanks
David

DennyB · 05-11-2004, 11:19 PM

Quote:

Originally Posted by griesel72

Robert, here are some closer pics, i couldn't find a number on the locker itself
(any idea where i would look?)

Thanks
David

Hmmm, It should be stamped in the ring gear?
Denny

Larry68GMC · 05-12-2004, 12:01 AM

What is the gear ratio of that rear end?

griesel72 · 05-12-2004, 08:37 AM

I found a number on the ring gear, but i think this is an aftermarket locker??

I'm pretty sure it is a 373 rearend

Thanks
David

griesel72 · 05-12-2004, 01:12 PM

Looks like the 465/205 is sold, the front clip and rearend are still avaliable.

Thanks
David

**Yukon Jack** · 05-12-2004, 04:50 PM

Wonder who to

Thanks!

griesel72 · 05-12-2004, 06:45 PM

Yukon,

I was tring to protect the innocent, and you blew my plan

Thanks
David

DennyB · 05-12-2004, 07:11 PM

Is that a corp. truck 12 bolt?
Would you be willing to ship the rear?
And I wonder what that would cost?
If the cost is to high to ship the whole rear and it is a truck 12 bolt, would you be willing to disassemble and ship me the carrier, ring and pinion?
zip = 08757

griesel72 · 05-12-2004, 07:44 PM

yes, it is a corp, 12 bolt. I wouldn't know where to try to find out about shipping, but i bet it would high enough that it wouldn't be worth it. I have another guy that wants me to pull out the carrier and ship, i will let you know if he doesn't want it.

Thanks
David

DennyB · 05-12-2004, 07:53 PM

Thanks David

**jerry moss** · 05-12-2004, 11:03 PM

i'm interested in the clutch linkage, Z-bar and rods, don't need the pedal. shipping to 94513. thanks in advance.

griesel72 · 05-12-2004, 11:12 PM

jerry, i'll take some pics and post them here for you tomorrow.

Thanks
DAvid

griesel72 · 05-13-2004, 09:58 AM

TTT, any offers on this front clip, i'm moving, and really don't have room for it. I would entertain any trades, also, i can use about anything smaller than a front clip.

Thanks
David

**jerry moss** · 05-13-2004, 08:10 PM

David,
thank you

BLAZERMAN · 05-13-2004, 10:32 PM

[QUOTE=griesel72]I found a number on the ring gear, but i think this is an aftermarket locker??

That is a GM G-80 gov-lock, more of a posi unit than locker.

griesel72 · 05-14-2004, 04:31 PM

to the top

05-11-2004, 04:11 PM	#1
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	trans/transfer, Front clip, Locker rearend for sale sm465/205 combo (out of a 71 chevy K20) for sale ($100 - truck was not running, but seems tight) Also have the complete pedal package/linkage, if interested Also have a 70 front clip, some rust, but not rusted out, missing hood and inner grill ($100) I also have a locker rearend, i dont' know anything about it ($50) Let me know if you need more pics or information Thanks David Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-11-2004, 04:14 PM	#2
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	got any more pics of the front clip? hows the other side look? __________________ No matter where you are..... There you are... Buckaroo Banzi

05-11-2004, 04:31 PM	#3
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Rambler I'll try to take some more pics tonight. Thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-11-2004, 05:12 PM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Are you going to be down the Wichita way anytime soon? I'm interested in the t/c and 4 speed. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-11-2004, 05:57 PM	#6
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Rambler, Here's a couple more pics of the front clip, and grill. The grill is a little bent, but could be fixed pretty easily. Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-11-2004, 05:17 PM	#5
TRUCKPOOR Registered User Join Date: Oct 2001 Location: Littleton, CO. USA Posts: 260	David, If you could take another closeup pic of that locker and try to find some numbers on it somewhere I'm interested, but only if I go to Kansas for some other parts also. Is it a 6 lug axle? Width from backing plate to backing plate? I will leave a pm with a number where I can be reached this evening after 7:30 mountain. Thanks, Robert

05-11-2004, 06:01 PM	#7
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Mark- I am moving back to Greenwood County the first of this month, and will be traveling to Wichita often (it's the closest place to go for food, etc) Robert - I'll try to take some more pics now, and look for some numbers, it is a 6 lug, and is set up to have leaf springs, the backing plate to plate measurement is 57 1/2 inches, and the rearend is a 12 bolt. The truck it came in didn't have a motor so i know nothing about it (explains the low price) thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-11-2004, 06:09 PM	#8
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Robert, here are some closer pics, i couldn't find a number on the locker itself (any idea where i would look?) Thanks David Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-11-2004, 09:46 PM	#9
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	I will PM you about the T/C and four speed. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-11-2004, 09:53 PM	#10
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	back at you Yukon Thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-12-2004, 12:01 AM	#12
Larry68GMC Registered User Join Date: Aug 2001 Location: Midwest City, OK Posts: 289	What is the gear ratio of that rear end? __________________ 71 GMC LWB 350, Dart Pro1's 200/64cc,10.2:1 RPM AirGap, 224/234 @50 496/518 lift w/1.6 roller rockers, 2500 stall '05 Dodge 2500 Crew Cab 4x4, 4 inch lift and 35's CTD

05-12-2004, 08:37 AM	#13
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	I found a number on the ring gear, but i think this is an aftermarket locker?? I'm pretty sure it is a 373 rearend Thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-12-2004, 01:12 PM	#14
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Looks like the 465/205 is sold, the front clip and rearend are still avaliable. Thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-12-2004, 04:50 PM	#15
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Wonder who to Thanks! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-12-2004, 06:45 PM	#16
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Yukon, I was tring to protect the innocent, and you blew my plan Thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife



Register or Log In To remove these advertisements.

05-12-2004, 07:11 PM	#17
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Is that a corp. truck 12 bolt? Would you be willing to ship the rear? And I wonder what that would cost? If the cost is to high to ship the whole rear and it is a truck 12 bolt, would you be willing to disassemble and ship me the carrier, ring and pinion? zip = 08757 __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider Last edited by DennyB; 05-12-2004 at 07:14 PM.

05-12-2004, 07:44 PM	#18
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	yes, it is a corp, 12 bolt. I wouldn't know where to try to find out about shipping, but i bet it would high enough that it wouldn't be worth it. I have another guy that wants me to pull out the carrier and ship, i will let you know if he doesn't want it. Thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-12-2004, 07:53 PM	#19
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Thanks David __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

05-12-2004, 11:03 PM	#20
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,949	i'm interested in the clutch linkage, Z-bar and rods, don't need the pedal. shipping to 94513. thanks in advance. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-12-2004, 11:12 PM	#21
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	jerry, i'll take some pics and post them here for you tomorrow. Thanks DAvid __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-13-2004, 09:58 AM	#22
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	TTT, any offers on this front clip, i'm moving, and really don't have room for it. I would entertain any trades, also, i can use about anything smaller than a front clip. Thanks David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-13-2004, 08:10 PM	#23
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,949	David, thank you __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

05-13-2004, 10:32 PM	#24
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,829	[QUOTE=griesel72]I found a number on the ring gear, but i think this is an aftermarket locker?? That is a GM G-80 gov-lock, more of a posi unit than locker.

05-14-2004, 04:31 PM	#25
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	to the top __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

Register or Log In To remove these advertisements.