The Burb a long time coming - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 10-05-2018, 04:47 PM

-
Man, you are doing some serious mods to that thing. As much as I like cutting, fitting, welding, and turning wrenches I don't think I would tackle something like that. Good job!

LockDoc

Average Joe · 10-05-2018, 09:24 PM

Very nice!!

Burb · 10-18-2018, 05:25 PM

Chassis crated up and ready go ... all 20 feet

Burb · 10-19-2018, 02:00 PM

My goodness ...

**Advanced Design** · 10-19-2018, 09:53 PM

Really crated up! When will it arrive?

Burb · 10-20-2018, 10:47 AM

probably monday. weather permitting

Burb · 10-24-2018, 05:13 PM

Well here are the shots prior to body test fit

**LockDoc** · 10-24-2018, 07:29 PM

-
Flipped the picture for you. Looks good!

LockDoc

Burb · 10-25-2018, 04:35 PM

Quote:

Originally Posted by LockDoc

-
Flipped the picture for you. Looks good!

LockDoc

thanks ... fingers crossed

Burb · 11-29-2018, 10:20 PM

Here are some pictures of the body on the chassis

Burb · 11-29-2018, 10:22 PM

And it on little 14" wheels for moving around the shop

Burb · 11-29-2018, 10:26 PM

Now the question is ... do ya think I can get a 177 compressor and a Sniper EFI on top of it and still use a stock hood to hide it?

**LockDoc** · 11-29-2018, 10:30 PM

Quote:

Originally Posted by Burb

Now the question is ... do ya think I can get a 177 compressor and a Sniper EFI on top of it and still use a stock hood to hide it?

I can't help you there, but it's looking good, that's for sure...

LockDoc

**KFF 1** · 11-29-2018, 10:35 PM

Looks good !!!!

Average Joe · 12-01-2018, 01:51 PM

Nice work!

Making serious progress!!

Burb · 12-01-2018, 08:19 PM

Body mounts were off ... But Mo's took care of it ...now they need to work on trans and shaft tunnel it was a low and now needs to be cut and slightly modified so the yoke is clear and then get a "single" drive shaft made for it

Burb · 12-01-2018, 08:26 PM

All settled in place but need some clearence Doug said he will make it a high hump and add just a little height to the stock raised portion down center

Burb · 12-01-2018, 08:30 PM

Body and chassis seem very tight now and once the rear wood is installed the body movement thanks to the poly will be zero

**72ironmike** · 12-09-2018, 07:47 AM

Quote:

Originally Posted by Burb

Chassis crated up and ready go ... all 20 feet

Super job. That crated chassis pic is one of my all time favorites on the board !

Burb · 12-14-2018, 03:51 PM

Made one of the many big decisions on the project ... The Wheels
Going to run 20" all the way around and have chosen a BOZE wheel called "Traction" for the front and "Traction Concave" for the rear, now I need to decide on whether to color match or leave polished

Burb · 01-17-2019, 07:31 PM

can't wait to get the 20" wheels on to see the stance better

14" wheels aren't doing it for me

Burb · 01-24-2019, 11:09 AM

A Fresh slate ... with the wheels, smooth bumpers, mirrors and grille modes applied...

Burb · 01-24-2019, 11:15 AM

Well it is time to get my ideas and vision visible for the build

And I have happened across a fantastic digital rendering specialist that I am sure has been used by others on this site ... considering his work

Give him your ideas and he quotes you off of that ...simple.

Burb · 01-24-2019, 11:16 AM

bit by bit ...

**Advanced Design** · 01-25-2019, 12:00 AM

A good direction you are taking the Burb. Will look sweet!

10-05-2018, 04:47 PM	#76
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,799	Re: The Burb a long time coming - Man, you are doing some serious mods to that thing. As much as I like cutting, fitting, welding, and turning wrenches I don't think I would tackle something like that. Good job! LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-05-2018, 09:24 PM	#77
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: The Burb a long time coming Very nice!! __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

10-18-2018, 05:25 PM	#78
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Chassis crated up and ready go ... all 20 feet Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

10-19-2018, 02:00 PM	#79
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming My goodness ... Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

10-19-2018, 09:53 PM	#80
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: The Burb a long time coming Really crated up! When will it arrive? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

10-20-2018, 10:47 AM	#81
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming probably monday. weather permitting __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

10-24-2018, 05:13 PM	#82
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Well here are the shots prior to body test fit Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be Last edited by LockDoc; 10-24-2018 at 07:29 PM.

10-24-2018, 07:29 PM	#83
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,799	Re: The Burb a long time coming - Flipped the picture for you. Looks good! LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-29-2018, 10:20 PM	#85
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Here are some pictures of the body on the chassis Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

11-29-2018, 10:22 PM	#86
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming And it on little 14" wheels for moving around the shop Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

11-29-2018, 10:26 PM	#87
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Now the question is ... do ya think I can get a 177 compressor and a Sniper EFI on top of it and still use a stock hood to hide it? __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

11-29-2018, 10:35 PM	#89
KFF 1 Senior Member Join Date: Sep 2018 Location: Belmont OH Posts: 296	Re: The Burb a long time coming Looks good !!!!

12-01-2018, 01:51 PM	#90
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: The Burb a long time coming Nice work! Making serious progress!! __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

12-01-2018, 08:19 PM	#91
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Body mounts were off ... But Mo's took care of it ...now they need to work on trans and shaft tunnel it was a low and now needs to be cut and slightly modified so the yoke is clear and then get a "single" drive shaft made for it __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-01-2018, 08:26 PM	#92
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming All settled in place but need some clearence Doug said he will make it a high hump and add just a little height to the stock raised portion down center Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be



Register or Log In To remove these advertisements.

12-01-2018, 08:30 PM	#93
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Body and chassis seem very tight now and once the rear wood is installed the body movement thanks to the poly will be zero Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

12-14-2018, 03:51 PM	#95
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Made one of the many big decisions on the project ... The Wheels Going to run 20" all the way around and have chosen a BOZE wheel called "Traction" for the front and "Traction Concave" for the rear, now I need to decide on whether to color match or leave polished Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

01-17-2019, 07:31 PM	#96
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming can't wait to get the 20" wheels on to see the stance better 14" wheels aren't doing it for me Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be Last edited by Burb; 01-21-2019 at 12:47 PM.

01-24-2019, 11:09 AM	#97
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming A Fresh slate ... with the wheels, smooth bumpers, mirrors and grille modes applied... Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

01-24-2019, 11:15 AM	#98
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Well it is time to get my ideas and vision visible for the build And I have happened across a fantastic digital rendering specialist that I am sure has been used by others on this site ... considering his work Give him your ideas and he quotes you off of that ...simple. __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

01-24-2019, 11:16 AM	#99
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming bit by bit ... Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

01-25-2019, 12:00 AM	#100
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: The Burb a long time coming A good direction you are taking the Burb. Will look sweet! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

Register or Log In To remove these advertisements.