Anyone see why these wont work? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Danvis · 10-07-2018, 06:21 PM

Anyone see why these wont work on an 84 c30 auto non ac truck? I cant think of a reason they wouldnt

https://www.jegs.com/i/Flowtech/387/...SABEgKzVvD_BwE

**Getter-Done** · 10-07-2018, 06:54 PM

I don't think they will cause you any trouble.
I would suggest using stage8 bolts.
They seem like a lot of money for a few bolts.
With the sets I have used I tighten they once and I'm done.
https://www.jegs.com/i/Stage-8/868/8911-A/10002/-1

sweetk30 · 10-07-2018, 09:06 PM

at that price WOW

few guys over on the other site are having good luck with the evilbay china stainless steel headers for 120-180ish .

and i have a set of headers for the 88-98 body style like you have in the pic from years ago when edelbrock had them for sale .

i had to clearance the frame to clear the o2 bung even after i capped it off and cut the hex off flush . it was a big notch i was not proud of . . . later took them off and welded a repair back in the frame .

https://ck5.com/forums/threads/got-s...inside.323418/

https://ck5.com/forums/threads/chinese-headers.335151/

74CustomK20 · 10-07-2018, 09:26 PM

Is there any reason why you want that style? Might be cheaper to buy appropriate ones for a 81-87 and weld in bungs in if you need them?

Danvis · 10-07-2018, 10:09 PM

Well i found some of the same ones on a scratch and dent for a little under 200 and no i have no need for the o2. Found some black on the same site that just says for sbc does not give an application its meant for.

10-07-2018, 06:21 PM	#1
Danvis Registered User Join Date: Sep 2018 Location: New market Posts: 11	Anyone see why these wont work? Anyone see why these wont work on an 84 c30 auto non ac truck? I cant think of a reason they wouldnt https://www.jegs.com/i/Flowtech/387/...SABEgKzVvD_BwE __________________ 1982 K10 350/sm465/205 2009 Silverado CCSB Z71 4x4 LT2 5.3 2008 Yukon Denali 6.2 AWD (BABY MOVER) 1983 K20 lwb 350/sm465/205....big nasty....sold.... 1986 GMC Sierra Classic 350 auto...sold 1998 Silverado extended cab z71 4x4 (first truck)

10-07-2018, 06:54 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,409	Re: Anyone see why these wont work? I don't think they will cause you any trouble. I would suggest using stage8 bolts. They seem like a lot of money for a few bolts. With the sets I have used I tighten they once and I'm done. https://www.jegs.com/i/Stage-8/868/8911-A/10002/-1 __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

10-07-2018, 09:06 PM	#3
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: Anyone see why these wont work? at that price WOW few guys over on the other site are having good luck with the evilbay china stainless steel headers for 120-180ish . and i have a set of headers for the 88-98 body style like you have in the pic from years ago when edelbrock had them for sale . i had to clearance the frame to clear the o2 bung even after i capped it off and cut the hex off flush . it was a big notch i was not proud of . . . later took them off and welded a repair back in the frame . https://ck5.com/forums/threads/got-s...inside.323418/ https://ck5.com/forums/threads/chinese-headers.335151/ __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

10-07-2018, 09:26 PM	#4
74CustomK20 Registered User Join Date: Oct 2014 Location: Tell City, IN Posts: 637	Re: Anyone see why these wont work? Is there any reason why you want that style? Might be cheaper to buy appropriate ones for a 81-87 and weld in bungs in if you need them? __________________ Big Nate Carp. Local 224. Buy made in the USA! 03 F350 6.0 Daily Race Truck. 79 C70 366 Project Dump.

10-07-2018, 10:09 PM	#5
Danvis Registered User Join Date: Sep 2018 Location: New market Posts: 11	Re: Anyone see why these wont work? Well i found some of the same ones on a scratch and dent for a little under 200 and no i have no need for the o2. Found some black on the same site that just says for sbc does not give an application its meant for. __________________ 1982 K10 350/sm465/205 2009 Silverado CCSB Z71 4x4 LT2 5.3 2008 Yukon Denali 6.2 AWD (BABY MOVER) 1983 K20 lwb 350/sm465/205....big nasty....sold.... 1986 GMC Sierra Classic 350 auto...sold 1998 Silverado extended cab z71 4x4 (first truck)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.