Seat Belt Install location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WB72 · 10-09-2018, 05:14 PM

Does anyone have the rough measurements to locate the retractable seat belt by the door?

During repair of the cab, I replaced the metal that houses the threaded insert for it. any close measurements will help. I will install a reinforcement plate when installing it now.

This is what I have to work with now. The red circles are the rear seat mounting area.

Red71gmc · 10-09-2018, 06:24 PM

I have one hole. 6 1/2" from back of cab x 1 1/2" from door seal area. Door seal is actually forward of the hole. I think this is what your asking and helps.

WB72 · 10-10-2018, 10:51 AM

That is a great start Thanks

**Canuckvetter** · 10-10-2018, 10:44 PM

Hope this helps. I’m in Edmonton area so you can PM me if you need actual measurements.

http://67-72chevytrucks.com/vboard/a...1&d=1539225758

10-09-2018, 05:14 PM	#1
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Seat Belt Install location Does anyone have the rough measurements to locate the retractable seat belt by the door? During repair of the cab, I replaced the metal that houses the threaded insert for it. any close measurements will help. I will install a reinforcement plate when installing it now. This is what I have to work with now. The red circles are the rear seat mounting area. Attached Images __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

10-09-2018, 06:24 PM	#2
Red71gmc Registered User Join Date: Jan 2017 Location: Brookston, In Posts: 482	Re: Seat Belt Install location I have one hole. 6 1/2" from back of cab x 1 1/2" from door seal area. Door seal is actually forward of the hole. I think this is what your asking and helps.

10-10-2018, 10:51 AM	#3
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	Re: Seat Belt Install location That is a great start Thanks __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

10-10-2018, 10:44 PM	#4
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: Seat Belt Install location Hope this helps. I’m in Edmonton area so you can PM me if you need actual measurements. http://67-72chevytrucks.com/vboard/a...1&d=1539225758 Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.