What Size Are These???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Blue · 12-02-2018, 02:36 PM

I'am about to put back the evap or canister. My question is what size nuts are these, STD or Metric ? I can not find them in my pile of stuff. I only started about 5 or 6 years ago with this project.

It is on an 87 rad. support.

John

Big Blue · 12-02-2018, 06:30 PM

Someone has to know,we all have this in our trucks.

John

4x4k30 · 12-02-2018, 07:11 PM

metric 13 mm wrench

Big Blue · 12-02-2018, 08:29 PM

Thank You 4x4k30, I knew someone had an answer. Thanks Again, John

12-02-2018, 02:36 PM	#1
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	What Size Are These???? I'am about to put back the evap or canister. My question is what size nuts are these, STD or Metric ? I can not find them in my pile of stuff. I only started about 5 or 6 years ago with this project. It is on an 87 rad. support. John Attached Images __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

12-02-2018, 06:30 PM	#2
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: What Size Are These???? Someone has to know,we all have this in our trucks. John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

12-02-2018, 07:11 PM	#3
4x4k30 Registered User Join Date: Jun 2003 Location: ga Posts: 630	Re: What Size Are These???? metric 13 mm wrench __________________ 4x4k30 if trouble was money i would have plenty

12-02-2018, 08:29 PM	#4
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: What Size Are These???? Thank You 4x4k30, I knew someone had an answer. Thanks Again, John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.