71 C-10 project for sale...

[Number98]

I have a 71 C-10 that I have been working on for over a year now. I am in the midst of changing jobs and I am going to have to let it go. The truck was complete and running good when I bought it. It has usual rust in the cab. Overall the body is not in bad shape plus I have some extra body parts as well. I have a list below that list everything I have to go with it. I am sure I will forget to list some of the little things. We are doing a frame off on it so it is completely torn apart. Here goes:

71 c-10 short bed frame - has been stripped and powder coated satin black. The frame has a CPP frame notch installed, the bolt in style but we went ahead and welded it in as well. We have also cut reliefs in the main cross memeber and welded in tubing so we could route the exhaust through it and keep the pipes tucked up close. It all looks brand new, we also have all the suspesion parts and other cross members were powder coated as well. all new bushings, ball joints, etc. Here is a list of what all I have to go with it:

All new ECE brake kit
-Cross drilled front rotors
-new pre bent stainless steel brake lines
-larger rear brake upgrade
-new master cylinder

2.5" ECE dropped spindles
1.5" ECE dropped front springs
5" ECE dropped rear springs
ECE lowered front sway bar kit
ECE rear shock relocator kit
ECE adjustable rear bar kit
Complete ECE front end rebuild kit
New drop shocks

ECE stainless steel fuel tank kit

ECE transmission crossmember, plus have the original automatic cross member

New radiator

New Auburn rear differential (posi unit)
Richmond 3:42 gears
All new seals for rear end and has been rebuilt and painted
Red Line synthetic fluid

1 set of 15x8" rally wheels with 255/70 R15 tires

All new windows from Vintage Glass

original 350 engine and TH350 Transmission

1 new Goodmark LF fender

1 new Good mark drivers side door shell

Lots of little parts, new door handles, new window cranks, tail light lenses, motor mounts, door hinge rebuild kits, etc..

Have a set of headers and pipes with Dyno max mufflers that were only ran for maybe 500 miles.

I have every part and piece that came off the truck. I still have the old spindles and brake systems, air boxes, gauge cluster, bench seat, coil springs, bumpers, fuel tank, sliding back window, etc.

The truck is a short/fleet with a steel floor that is actually in pretty good shape. It is an original A/C truck. The front core support, frame, all cross memebers, upper and lower "A" frames and bumper brackets have all been powder coated satin black and look brand new.

I am not sure what to ask for all this though and am hoping you guys can help tell me what its all worth? I know my recipts and all are over $10K but you know how that is I am hoping I might can get half that and put her in a good home. Thanks for your help on this guys.

Please call for any details. I have nearly every recipt and even pictures from the tear down. I hope I listed everything.

Located in Atlanta, GA

Jason Seigler
Daytime: 770-389-7785
Cell: 404-402-8152
jrs3498@aol.com

[Number98]

Almost forgot I have a new ECE quick ratio steering box for it as well.

Back to the top......

[chevytruckfan]

Got any photos? Mail them to millermickey7@yahoo.com

[Number98]

Truckfan, I just sent you an e-mail... sorry for the delay I have been out of town.

Back to the top again...

Jason

[imaindianoutlaw]

Man I was just in Brunswick! This would be awesome for me same time next year!

[67chev]

If you decide to split this up at all, I would be interested in the drop spindles/springs (front and back), and the sway bars. Also the shocks, fuel tank kit, and radiator. Let me know what you decide!! Wish I could take the whole thing from ya, but not enuf room right now!!!

[1971c10]

ttt back to the top

[Number98]

I am really hoping to sell it all together and not split it up, that way I can move it all out at once. This is my problem also... just not enough room plus some other junk I am having to deal with right now. I dropped the ball and didnt get a chance to take the pictures yet but I am going to get down there and snap some tonight.

Jason

[guyryan100]

c'mon... part it out! I'd take the auto crossmember off your hands (am local)

[bestchevyfan]

Would Like To See Some Pictures. Thanks,buddy

[Number98]

Email me and I can send you a few pictures....

Jason

jrs3498@aol.com

[ScottH]

If you part it out, keep me in mind for the rear......thanks.

[d2b4y]

I'd be interested in buying the bed off you. That is, if you decide to part it out.

[Number98]

Alright then guys, at this point I guess I will end up parting it all out. Just let me know what you interested in and we can go from there.

Jason
jrs3498@aol.com
cell# 404-402-8152

[boraxman]

im interested in the shocks, what kind & how much? Also how much for the sway bar?

[Burnsman]

I may be intersted in the rear springs, shocks, shock relocator kit, adjustable panhard, etc. Need prices though (might be easier to put prices on your list above). Thanks! Brian

[67chev]

sent you a pm