47-55.1 Inside doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 01-12-2019, 02:13 PM

I have been working inside the doors with the single window. As expected there is a lot of surface rust inside.

How do I treat it?

I've thought about a rust killer product and some POR, but don't know if that is the right way to go.

The doors on the Cherokee I did had been treated with something and didn't have this kind of rust. These must have been raw steel when it left the factory.

b-mac · 01-14-2019, 04:37 PM

I'm almost to this point...want to make sure I'm 100% done screwing with the doors.

Anyway, I was thinking of something like this. I used it on the frame, and it seemed to work well.

https://www.eastwood.com/eastwood-in...z-aerosol.html

01-12-2019, 02:13 PM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,379	Inside doors I have been working inside the doors with the single window. As expected there is a lot of surface rust inside. How do I treat it? I've thought about a rust killer product and some POR, but don't know if that is the right way to go. The doors on the Cherokee I did had been treated with something and didn't have this kind of rust. These must have been raw steel when it left the factory. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

01-14-2019, 04:37 PM	#2
b-mac Registered User Join Date: Mar 2014 Location: Wichita Posts: 519	Re: Inside doors I'm almost to this point...want to make sure I'm 100% done screwing with the doors. Anyway, I was thinking of something like this. I used it on the frame, and it seemed to work well. https://www.eastwood.com/eastwood-in...z-aerosol.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.