Extreme porterbuilt build threads

[ripper70]

Aanyone off the top of there head have some good build threads with Porterbuilt extreme dropmember front and rear WITH Porterbuilt body drop?

[OARNGESI]

Go in the suspension section and look for the sticky at the top titled how about pics of bagged c10s then look for there build threads you’ll be reading for months

[EVRLET]

Are you looking to do a body drop? I think it’s overrated. I have front and rear v7 and my pinch weld sits about 1/8” off the ground. To me, going through all the trouble to body drop for that extra 1/8” of an inch is not worth it. I remember talking to Dave a while back and he said those that do the body drop are people who want to do that small subtle thing that people never really notices. He also said, unless you’re really looking for it, you’ll never know.

Here’s a pic of my pinch weld:

[ripper70]

Yeah I'm starting to have second thoughts about body drop. Problem is I already took the 4 side cab mounts off. I feel like I'm stuck with a body drop now cause I don't see aftermarket factory mounts anywhere to bolt back on

[YBNORML]

I did the body drop on a former project and took it off and sold it. For me it was a result of figment issues with my big block/distributor. I found a set of replacement mounts here on the forum for about $50.

[69GMC2004]

Originally Posted by ripper70

Yeah I'm starting to have second thoughts about body drop. Problem is I already took the 4 side cab mounts off. I feel like I'm stuck with a body drop now cause I don't see aftermarket factory mounts anywhere to bolt back on

I believe you can get replacement mounts from LMC.