CA WTB: SBC oil dipstick and tube - see picture - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72Cheyenne454 · 03-14-2019, 09:45 PM

Looking to buy a SBC dipstick and tube like the one pictured.

I'm not sure if this style of dipstick was on 1972 4x4's only, or if there were other applications.

The pictured dipstick is from a 72 K20 I restored a few years ago. I'm looking for an exact match to this dipstick, so the tube needs to have the mounting bracket that bolts to the exhaust manifold stud and have matching dipstick.

Thanks,
Miles

**CarlsLQ9SS** · 03-14-2019, 09:58 PM

I have an old engine in my garage, Ill look to see if its the same tube on it. Ill let you know tomorrow.

72Cheyenne454 · 03-14-2019, 10:18 PM

Thank you!

Quote:

Originally Posted by CarlsLQ9SS

I have an old engine in my garage, Ill look to see if its the same tube on it. Ill let you know tomorrow.

**WETOWM** · 03-15-2019, 08:30 AM

I belive that is 69 -72 4x4 only

72Cheyenne454 · 03-15-2019, 07:33 PM

Quote:

Originally Posted by WETOWM

I belive that is 69 -72 4x4 only

I'm not sure what was standard on 4x4's. My 70 K20 and my fathers 70 K10 both have the common short style tube with no mounting tab. My 72 4x4 was the only truck I've had with the long tube and mounting tab.

**CarlsLQ9SS** · 03-15-2019, 08:49 PM

My tube dont have mounting tab, sorry.

72Cheyenne454 · 03-15-2019, 09:28 PM

Thanks for looking, I appreciate it!

Quote:

Originally Posted by CarlsLQ9SS

My tube dont have mounting tab, sorry.

**CarlsLQ9SS** · 03-15-2019, 10:09 PM

Your welcome, maybe someone will chime in with one. My old man may have it, but he lives an hour away from me and hes not able to check on it for me anymore.

**CUSTOM/10** · 03-16-2019, 07:53 AM

I do believe that dipstick was a 4x4 only thing, longer to make it easier to reach on the higher 4x4's. But with that said, vans of that era may have the same or similar. Both 72 4x4's I've owned had them. Later models swapped to passenger side dipstick at some point. This dip-stick in good shape isn't easy to find.

Good luck in your search !
Gary

**undertaker72** · 03-16-2019, 09:43 AM

I believe I have a couple of those it is four-wheel drive only and they are very hard to find I will check the shop tonight after work or tomorrow morning and post you pictures

72Cheyenne454 · 03-16-2019, 10:30 AM

Quote:

Originally Posted by undertaker72

I believe I have a couple of those it is four-wheel drive only and they are very hard to find I will check the shop tonight after work or tomorrow morning and post you pictures

Great news... thank you!

**Eagle9502** · 03-16-2019, 04:27 PM

Undertaker72, I need one as well if you have multiple. Don’t want to hijack the thread.

72Cheyenne454 · 03-17-2019, 05:57 PM

Quote:

Originally Posted by undertaker72

I believe I have a couple of those it is four-wheel drive only and they are very hard to find I will check the shop tonight after work or tomorrow morning and post you pictures

Did you have any luck finding one undertaker72?

Thanks again for looking, I appreciate it!

**undertaker72** · 03-17-2019, 09:58 PM

Quote:

Originally Posted by 72Cheyenne454

Did you have any luck finding one undertaker72?

Thanks again for looking, I appreciate it!

Ask and ye shall receive

**undertaker72** · 03-17-2019, 10:02 PM

These are in my opinion kind of hard to find I have three of them I really don't care if I sell one if you want to buy one I will sell you the one that has had the flange welded as they always break at the special stud because people won't use a backup 9/16 wrench when they undo the 1/2 nut, this also had a small crack down at the base where it goes into the block both was professionally welded and repaired if you want it you can have it for $105 shipped if using PayPal I would like fees considered

72Cheyenne454 · 03-18-2019, 04:17 PM

Quote:

Originally Posted by undertaker72

These are in my opinion kind of hard to find I have three of them I really don't care if I sell one if you want to buy one I will sell you the one that has had the flange welded as they always break at the special stud because people won't use a backup 9/16 wrench when they undo the 1/2 nut, this also had a small crack down at the base where it goes into the block both was professionally welded and repaired if you want it you can have it for $105 shipped if using PayPal I would like fees considered

Thank you undertaker72, but I'm going to pass. I have access locally to a dipstick in similar condition (cracked/repaired), but I really want a good clean undamaged unit - like the bottom one you have pictured, as it looks clean from what I can see. So, wishful thinking I know, but I can continue to run my short dipstick until one turns up.

If you decide later on to sell one with no weld repair or damage... shoot me a PM please.

Thanks again

**undertaker72** · 03-18-2019, 04:28 PM

Quote:

Originally Posted by 72Cheyenne454

Thank you undertaker72, but I'm going to pass. I have access locally to a dipstick in similar condition (cracked/repaired), but I really want a good clean undamaged unit - like the bottom one you have pictured, as it looks clean from what I can see. So, wishful thinking I know, but I can continue to run my short dipstick until one turns up.

If you decide later on to sell one with no weld repair or damage... shoot me a PM please.

Thanks again

No problem like I said I kind of was earmarked for projects anyway

Just trying to help out good luck with your quest

72Cheyenne454 · 05-04-2019, 05:24 PM

TTT

still looking for a 4x4 oil dipstick

72Cheyenne454 · 05-24-2019, 04:05 PM

Still looking...

03-14-2019, 09:45 PM	#1
72Cheyenne454 Registered User Join Date: Apr 2007 Location: San Diego Posts: 457	WTB: SBC oil dipstick and tube - see picture Looking to buy a SBC dipstick and tube like the one pictured. I'm not sure if this style of dipstick was on 1972 4x4's only, or if there were other applications. The pictured dipstick is from a 72 K20 I restored a few years ago. I'm looking for an exact match to this dipstick, so the tube needs to have the mounting bracket that bolts to the exhaust manifold stud and have matching dipstick. Thanks, Miles Attached Images

03-14-2019, 09:58 PM	#2
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Re: WTB: SBC oil dipstick and tube - see picture I have an old engine in my garage, Ill look to see if its the same tube on it. Ill let you know tomorrow.

03-15-2019, 08:30 AM	#4
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,119	Re: WTB: SBC oil dipstick and tube - see picture I belive that is 69 -72 4x4 only

03-15-2019, 08:49 PM	#6
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Re: WTB: SBC oil dipstick and tube - see picture My tube dont have mounting tab, sorry.

03-15-2019, 10:09 PM	#8
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,162	Re: WTB: SBC oil dipstick and tube - see picture Your welcome, maybe someone will chime in with one. My old man may have it, but he lives an hour away from me and hes not able to check on it for me anymore.

03-16-2019, 07:53 AM	#9
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: WTB: SBC oil dipstick and tube - see picture I do believe that dipstick was a 4x4 only thing, longer to make it easier to reach on the higher 4x4's. But with that said, vans of that era may have the same or similar. Both 72 4x4's I've owned had them. Later models swapped to passenger side dipstick at some point. This dip-stick in good shape isn't easy to find. Good luck in your search ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

03-16-2019, 09:43 AM	#10
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: WTB: SBC oil dipstick and tube - see picture I believe I have a couple of those it is four-wheel drive only and they are very hard to find I will check the shop tonight after work or tomorrow morning and post you pictures __________________ I aint nobody DORK 1972 Cheyenne super k10 swb 350 4speed posi hooks 1934 ford 3 window blown 355 1969 Camaro hugger orange hounds tooth

03-16-2019, 04:27 PM	#12
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 838	Re: WTB: SBC oil dipstick and tube - see picture Undertaker72, I need one as well if you have multiple. Don’t want to hijack the thread.

03-17-2019, 10:02 PM	#15
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: WTB: SBC oil dipstick and tube - see picture These are in my opinion kind of hard to find I have three of them I really don't care if I sell one if you want to buy one I will sell you the one that has had the flange welded as they always break at the special stud because people won't use a backup 9/16 wrench when they undo the 1/2 nut, this also had a small crack down at the base where it goes into the block both was professionally welded and repaired if you want it you can have it for $105 shipped if using PayPal I would like fees considered Attached Images __________________ I aint nobody DORK 1972 Cheyenne super k10 swb 350 4speed posi hooks 1934 ford 3 window blown 355 1969 Camaro hugger orange hounds tooth

05-04-2019, 05:24 PM	#18
72Cheyenne454 Registered User Join Date: Apr 2007 Location: San Diego Posts: 457	Re: WTB: SBC oil dipstick and tube - see picture TTT still looking for a 4x4 oil dipstick

05-24-2019, 04:05 PM	#19
72Cheyenne454 Registered User Join Date: Apr 2007 Location: San Diego Posts: 457	Re: WTB: SBC oil dipstick and tube - see picture Still looking...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.