Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" - Page 50 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kdad · 04-24-2019, 09:31 AM

Lookin great!

mjh1965 · 04-25-2019, 04:39 PM

Quote:

Originally Posted by kdad

Lookin great!

Thanks it's great to be working on it on again .

mjh1965 · 05-10-2019, 09:41 PM

Well with the cab in the rotisserie I was able to start getting if ready for paint

So after finishing both outer rockers I started cleaning up the underneath

Then brush sealer was applied

Finally ready for under seal spray schutz underseal

I know I’ve said it before but I am so glad I purchased this rotisserie

I finally feel it’s getting further along

Lokin4AReason · 05-10-2019, 11:27 PM

Looking good .... keep the fotos coming

mjh1965 · 05-16-2019, 02:19 PM

Quote:

Originally Posted by Lokin4AReason

Looking good .... keep the fotos coming

Thanks
Hopefully I am getting a delivery from the states this weekend
Photos to follow hopefully.

mjh1965 · 05-20-2019, 01:47 AM

The good news
My new bed strips with the fitting kit , and body mouldings and the clips have arrived. On all the C10 Facebook pages most people had recommended Mar-k in Oklahoma for the body mouldings. The reason for this is they are made in the USA no cheap Chinese copy’s . The problem I had was Mar-k don’t deliver to the U.K. . The good news is Topspeed and there sister company CM Frost were able to purchase them from Mar-k and ship them over to the U.K. as they are an agent for them . They arrived very well packed . As for the truck I spent most of the weekend sanding and prepping the floor inside ready for primer.

MacQuigley · 05-20-2019, 12:15 PM

Youll have her on the road by Christmas mate!

mjh1965 · 05-20-2019, 12:52 PM

Quote:

Originally Posted by MacQuigley

Youll have her on the road by Christmas mate!

Thanks Bill I would like to at least have the cab painted underneath and the engine bay painted, and the inside all painted Then I plan on getting the cab back on the chassis. If it’s done by the end of the summer, I can start fitting all the parts over the winter . This arrived today to help it happen

mjh1965 · 08-28-2019, 05:02 PM

Well I thought I’d put some updates on . I managed to paint the underneath of the cab with stone chip then the colour. Hugger orange.

Next I primed the firewall then prepared it for colour

Well it’s getting there at last

MacQuigley · 08-28-2019, 07:06 PM

Its looking good Martin. Really starting to take shape now.

**Palf70Step** · 08-28-2019, 08:06 PM

realvc · 08-29-2019, 09:24 AM

Way to go Martin. Looking good!!!!!!

mjh1965 · 09-15-2019, 03:49 PM

Well I got a bit more done on the truck this weekend.
Inner fenders back from sand blasting.
Then the rusty section was cut out and the rust replaced with new metal.
Then filled and prepared for primer.
Then high build primer.

realvc · 09-15-2019, 08:30 PM

Looking good. Always glad to see your progress.

Grizz1963 · 09-16-2019, 03:54 AM

Massive progress!!!

Well done mate !!

**Palf70Step** · 09-16-2019, 07:15 AM

Very nice work Martin. Glad to see it making progress!

mjh1965 · 09-18-2019, 01:58 AM

Quote:

Originally Posted by realvc

Looking good. Always glad to see your progress.

Quote:

Originally Posted by Grizz1963

Massive progress!!!

Well done mate !!

Quote:

Originally Posted by Palf70Step

Very nice work Martin. Glad to see it making progress!

Thanks guys is good to be making progress at last

mjh1965 · 11-04-2019, 03:30 PM

Well with the weather changing I put all the truck panels away in the garage and started working back on the chassis.

The first job was to cut the crossmember to make way for my exhaust

So the fun has started
Posted via Mobile Device

realvc · 11-04-2019, 04:20 PM

Lookin' good Martin.

MacQuigley · 11-04-2019, 05:32 PM

Dont you just love a plasma cutter!

Looking good though. You putting an X pipe in there.

BTW Im giving you a chance to catch up. I bought this for my youngest.

Name: 20180501_203455_resized_1.jpg
Views: 626
Size: 43.9 KB

Name: 20180501_203455_resized_1.jpg
Views: 626
Size: 43.9 KB

It very quickly became this.

Name: 20191028_204755.jpg
Views: 606
Size: 37.7 KB

Name: 20191030_203655_001.jpg
Views: 537
Size: 33.4 KB

Ive decided Im crap at buying cars!

Got another 6 months of cutting, grinding and welding ahead of me, not to mention filling sanding and painting! I may finish the truck one day, then again I may not!

**Bugeyev8** · 03-17-2020, 12:34 AM

any progress ? I know im absent from here for a year or two...but still check this thread

mjh1965 · 03-17-2020, 03:54 AM

Quote:

Originally Posted by Bugeyev8

any progress ? I know im absent from here for a year or two...but still check this thread

Yes I have got al the exhaust fabrication done and welded Up ready t install . Unfortunately Photobucket are holding me to ransom and I can’t upload pictures. I need to find another image hosting solution . Thanks for looking in though .
Posted via Mobile Device

mjh1965 · 03-17-2020, 06:44 PM

https://www.flickr.com/gp/187478294@N02/BM78fj

Ihttps://www.flickr.com/gp/187478294@N02/r5c349

https://flic.kr/p/2iFfxwb

https://www.flickr.com/gp/187478294@N02/zTi911

Posted via Mobile Device

Modges'66 · 03-21-2020, 07:16 PM

You got me checkin- in too!!!
We need more progress! LOL!

J Williams · 04-19-2020, 12:25 AM

Looking great man! I am getting close to prime my cab. Looking at your thread has me all amped up! Keep up the good work.
Posted via Mobile Device

04-24-2019, 09:31 AM	#1226
kdad Registered User Join Date: Jul 2018 Location: Hollister, California Posts: 230	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Lookin great! __________________ Check out my build here http://67-72chevytrucks.com/vboard/s...d.php?t=768039 She may not be the prom queen but at least she puts out..

05-10-2019, 09:41 PM	#1228
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Well with the cab in the rotisserie I was able to start getting if ready for paint So after finishing both outer rockers I started cleaning up the underneath Then brush sealer was applied Finally ready for under seal spray schutz underseal I know I’ve said it before but I am so glad I purchased this rotisserie I finally feel it’s getting further along __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614

05-10-2019, 11:27 PM	#1229
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 974	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Looking good .... keep the fotos coming __________________ dont want to hear excuses, i want to hear solution(s)

05-20-2019, 01:47 AM	#1231
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" The good news My new bed strips with the fitting kit , and body mouldings and the clips have arrived. On all the C10 Facebook pages most people had recommended Mar-k in Oklahoma for the body mouldings. The reason for this is they are made in the USA no cheap Chinese copy’s . The problem I had was Mar-k don’t deliver to the U.K. . The good news is Topspeed and there sister company CM Frost were able to purchase them from Mar-k and ship them over to the U.K. as they are an agent for them . They arrived very well packed . As for the truck I spent most of the weekend sanding and prepping the floor inside ready for primer. __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614 Last edited by mjh1965; 05-20-2019 at 03:05 AM.

05-20-2019, 12:15 PM	#1232
MacQuigley Registered User Join Date: Aug 2015 Location: Scotland Posts: 737	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Youll have her on the road by Christmas mate! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742352 http://67-72chevytrucks.com/vboard/s...d.php?t=681645

08-28-2019, 05:02 PM	#1234
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Well I thought I’d put some updates on . I managed to paint the underneath of the cab with stone chip then the colour. Hugger orange. Next I primed the firewall then prepared it for colour Well it’s getting there at last __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614 Last edited by mjh1965; 08-28-2019 at 05:14 PM.

08-28-2019, 07:06 PM	#1235
MacQuigley Registered User Join Date: Aug 2015 Location: Scotland Posts: 737	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Its looking good Martin. Really starting to take shape now. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742352 http://67-72chevytrucks.com/vboard/s...d.php?t=681645

08-28-2019, 08:06 PM	#1236
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,225	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

08-29-2019, 09:24 AM	#1237
realvc Registered User Join Date: Sep 2013 Location: Lake Norrell, Arkansas Posts: 415	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Way to go Martin. Looking good!!!!!! __________________ Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old"

09-15-2019, 03:49 PM	#1238
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Well I got a bit more done on the truck this weekend. Inner fenders back from sand blasting. Then the rusty section was cut out and the rust replaced with new metal. Then filled and prepared for primer. Then high build primer. __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614

09-15-2019, 08:30 PM	#1239
realvc Registered User Join Date: Sep 2013 Location: Lake Norrell, Arkansas Posts: 415	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Looking good. Always glad to see your progress. __________________ Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old"

09-16-2019, 03:54 AM	#1240
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,576	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Massive progress!!! Well done mate !! __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

09-16-2019, 07:15 AM	#1241
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,225	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Very nice work Martin. Glad to see it making progress! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-04-2019, 03:30 PM	#1243
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Well with the weather changing I put all the truck panels away in the garage and started working back on the chassis. The first job was to cut the crossmember to make way for my exhaust So the fun has started Posted via Mobile Device

11-04-2019, 04:20 PM	#1244
realvc Registered User Join Date: Sep 2013 Location: Lake Norrell, Arkansas Posts: 415	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Lookin' good Martin. __________________ Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old"



Register or Log In To remove these advertisements.

11-04-2019, 05:32 PM	#1245
MacQuigley Registered User Join Date: Aug 2015 Location: Scotland Posts: 737	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Dont you just love a plasma cutter! Looking good though. You putting an X pipe in there. BTW Im giving you a chance to catch up. I bought this for my youngest. It very quickly became this. Ive decided Im crap at buying cars! Got another 6 months of cutting, grinding and welding ahead of me, not to mention filling sanding and painting! I may finish the truck one day, then again I may not! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742352 http://67-72chevytrucks.com/vboard/s...d.php?t=681645

03-17-2020, 12:34 AM	#1246
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" any progress ? I know im absent from here for a year or two...but still check this thread

03-17-2020, 06:44 PM	#1248
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" https://www.flickr.com/gp/187478294@N02/BM78fj Ihttps://www.flickr.com/gp/187478294@N02/r5c349 https://flic.kr/p/2iFfxwb https://www.flickr.com/gp/187478294@N02/zTi911 Posted via Mobile Device

03-21-2020, 07:16 PM	#1249
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" You got me checkin- in too!!! We need more progress! LOL! __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

04-19-2020, 12:25 AM	#1250
J Williams Registered User Join Date: Jun 2014 Location: Paul idaho Posts: 263	Re: Martin's mi-STRESS, 1965 Long Fleetside C10 "Rebuild in ENGLAND" Looking great man! I am getting close to prime my cab. Looking at your thread has me all amped up! Keep up the good work. Posted via Mobile Device

Register or Log In To remove these advertisements.