Its Mine the World Famous 67 Dragtruck - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

regan wilson · 05-17-2019, 08:37 AM

Looks great and sounds great. It's begging for the spray looks like the converter is pretty tight.

djracer · 05-19-2019, 09:32 PM

Sexy picture of Bad Habit

djracer · 05-19-2019, 09:36 PM

2 all truck races 2 final rounds but bridesmaid in both maybe next time will be my time!

https://www.facebook.com/thebattlefi...3106383277751/

bravo411 · 05-20-2019, 05:16 PM

What muffler are you running Kevin?

djracer · 05-20-2019, 05:41 PM

Vibrant 17995 Stainless Steel... https://www.amazon.com/dp/B001806WT4...p_mob_ap_share

bravo411 · 05-21-2019, 11:50 AM

Awesome, Thank you sir..

djracer · 03-17-2020, 12:22 AM

Just a few pics

djracer · 03-17-2020, 12:24 AM

hey guys where is the best place to get a smooth cowl?

regan wilson · 03-17-2020, 08:13 AM

Looks awesome Kevin. Smooth cowl?

djracer · 03-17-2020, 08:21 AM

Quote:

Originally Posted by regan wilson

Looks awesome Kevin. Smooth cowl?

Thanks Brother. I hope you get to go racing soon.

I want to replace my cowl panel with a metal or glass one with no holes I have found a few but they cost almost as much as a hood. I may try to find a good one and fill in the vents and wiper holes.

SCOTI · 03-17-2020, 10:31 AM

Quote:

Originally Posted by djracer

Thanks Brother. I hope you get to go racing soon.

I want to replace my cowl panel with a metal or glass one with no holes I have found a few but they cost almost as much as a hood. I may try to find a good one and fill in the vents and wiper holes.

https://munsseyspeed.com/

djracer · 03-17-2020, 01:52 PM

Quote:

Originally Posted by SCOTI

https://munsseyspeed.com/

I am familiar they make nice stuff just allot by the time I ship it.

SCOTI · 03-17-2020, 02:20 PM

Quote:

Originally Posted by djracer

I am familiar they make nice stuff just allot by the time I ship it.

Agreed. Quality products though....

57sailplane · 11-14-2020, 02:13 PM

so,

i see you put the coolers in the bed. including the rad. laying horizontal. had been planning to do the same. could you elaborate on the rad set up and how well it works.

djracer · 11-14-2020, 07:54 PM

Quote:

Originally Posted by 57sailplane

so,

i see you put the coolers in the bed. including the rad. laying horizontal. had been planning to do the same. could you elaborate on the rad set up and how well it works.

I had some cooling issues so I moved it back up front. I have a remote pump but not sure it is cooling as well as my old remote pump.

djracer · 02-02-2022, 01:14 AM

Well guys and gals me and Bad Habit are still kicking. Ole truck has been getting some love because I am racing at Lights Out in Adel Ga the last weekend of February! I even bought a diesel pusher so I can stay at the track!

djracer · 02-02-2022, 01:36 AM

I am fixing to order more Badhabit hats and shirts. If you have any weird request post them here. I will ship or will have at Lights Out! I have a limited supply of Richardson 112 Snap Backs but plan to stock flexfit all black with mesh cloth on the back. I will add shirt and flexfit pics soon. The second Black/white hat with embroidery on the back is the flex fit this is the only One that color. I thought the all Black would hot but it is not with the mesh back! Hats are 20 or 25 shipped Shirts will be a much better quality than most. They are 25 or 30 shipped!

aggie91 · 02-02-2022, 11:09 AM

Nice shirts and hats! Best of luck this weekend!

djracer · 02-02-2022, 11:20 AM

Thanks Karl the race is the last weekend in February

aggie91 · 02-02-2022, 11:29 AM

Quote:

Originally Posted by djracer

Thanks Karl the race is the last weekend in February

I guess I need to learn to read...lol

regan wilson · 02-02-2022, 08:19 PM

I like your shirts and hats they're cool. I really like the fact you put a front bumper on the old truck. Good luck at LO buddy.

djracer · 02-02-2022, 11:35 PM

Thanks Regan I really did not want the fog lights in it but I could not get a nice one right now without.

57sailplane · 02-25-2022, 10:43 AM

hey, Keven got some questions.

How do i get a T shirt.

secound. i see you got a wide tire with disc brakes. i am having issues with figuring out disc brakes on a wide tire in back. is your ford 9 narrowed and how much. who built it?

Thanks Andrew K

djracer · 04-20-2022, 12:01 AM

Quote:

Originally Posted by 57sailplane

hey, Keven got some questions.

How do i get a T shirt.

secound. i see you got a wide tire with disc brakes. i am having issues with figuring out disc brakes on a wide tire in back. is your ford 9 narrowed and how much. who built it?

Thanks Andrew K

It is a narrowed Fab 9. It had a modded factory housing when I got it. It has willwood rear disc.

Shirts run a little small (get 1 size bigger than normal)but are super high quality and thin so you don't Die of a Heat Stroke!
They are 20 to xl and 30 for up to 5x and 5 to ship. Hats are 20 also!

djracer · 04-20-2022, 12:04 AM

Finally a sexy shot with the Hood!

Soon to have Fueltech onboard!!!!!!!

05-17-2019, 08:37 AM	#1126
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Its Mine the World Famous 67 Dragtruck Looks great and sounds great. It's begging for the spray looks like the converter is pretty tight. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

05-19-2019, 09:32 PM	#1127
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Sexy picture of Bad Habit Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-19-2019, 09:36 PM	#1128
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck 2 all truck races 2 final rounds but bridesmaid in both maybe next time will be my time! https://www.facebook.com/thebattlefi...3106383277751/ __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-20-2019, 05:16 PM	#1129
bravo411 Registered User Join Date: Sep 2015 Location: Odessa, Texas Posts: 6	Re: Its Mine the World Famous 67 Dragtruck What muffler are you running Kevin?

05-20-2019, 05:41 PM	#1130
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Vibrant 17995 Stainless Steel... https://www.amazon.com/dp/B001806WT4...p_mob_ap_share __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

05-21-2019, 11:50 AM	#1131
bravo411 Registered User Join Date: Sep 2015 Location: Odessa, Texas Posts: 6	Re: Its Mine the World Famous 67 Dragtruck Awesome, Thank you sir..

03-17-2020, 12:22 AM	#1132
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Just a few pics __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-17-2020, 12:24 AM	#1133
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck hey guys where is the best place to get a smooth cowl? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-17-2020, 08:13 AM	#1134
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Its Mine the World Famous 67 Dragtruck Looks awesome Kevin. Smooth cowl? __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

11-14-2020, 02:13 PM	#1139
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Its Mine the World Famous 67 Dragtruck so, i see you put the coolers in the bed. including the rad. laying horizontal. had been planning to do the same. could you elaborate on the rad set up and how well it works. __________________ my build http://67-72chevytrucks.com/vboard/s...d.php?t=210902

02-02-2022, 01:14 AM	#1141
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Well guys and gals me and Bad Habit are still kicking. Ole truck has been getting some love because I am racing at Lights Out in Adel Ga the last weekend of February! I even bought a diesel pusher so I can stay at the track! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-02-2022, 01:36 AM	#1142
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck I am fixing to order more Badhabit hats and shirts. If you have any weird request post them here. I will ship or will have at Lights Out! I have a limited supply of Richardson 112 Snap Backs but plan to stock flexfit all black with mesh cloth on the back. I will add shirt and flexfit pics soon. The second Black/white hat with embroidery on the back is the flex fit this is the only One that color. I thought the all Black would hot but it is not with the mesh back! Hats are 20 or 25 shipped Shirts will be a much better quality than most. They are 25 or 30 shipped! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 02-02-2022 at 01:46 AM.

02-02-2022, 11:09 AM	#1143
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Its Mine the World Famous 67 Dragtruck Nice shirts and hats! Best of luck this weekend! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-02-2022, 11:20 AM	#1144
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Thanks Karl the race is the last weekend in February __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-02-2022, 08:19 PM	#1146
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Its Mine the World Famous 67 Dragtruck I like your shirts and hats they're cool. I really like the fact you put a front bumper on the old truck. Good luck at LO buddy. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph



Register or Log In To remove these advertisements.

02-02-2022, 11:35 PM	#1147
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Thanks Regan I really did not want the fog lights in it but I could not get a nice one right now without. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-25-2022, 10:43 AM	#1148
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Its Mine the World Famous 67 Dragtruck hey, Keven got some questions. How do i get a T shirt. secound. i see you got a wide tire with disc brakes. i am having issues with figuring out disc brakes on a wide tire in back. is your ford 9 narrowed and how much. who built it? Thanks Andrew K __________________ my build http://67-72chevytrucks.com/vboard/s...d.php?t=210902 Last edited by 57sailplane; 02-25-2022 at 04:06 PM.

04-20-2022, 12:04 AM	#1150
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Its Mine the World Famous 67 Dragtruck Finally a sexy shot with the Hood! Soon to have Fueltech onboard!!!!!!! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.