Intro and Some Photos of my '63 Project - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vin63 · 07-24-2019, 03:09 PM

Got the AC hoses routed and installed, so I was able to re-mount the grill, hopefully for the last time. LOL

**Android04** · 07-24-2019, 03:23 PM

Looks exceptional

vin63 · 08-07-2019, 11:45 AM

Quote:

Originally Posted by Android04

Looks exceptional

Thanks! I was able to finish up the interior AC installation and wiring, which allowed me to start wrapping up the interior (and finally got the bench seat out of my office. LOL)

http://www.youtube.com/watch?v=QFAYYGBvVug

66-PMD-GMC · 08-07-2019, 12:13 PM

Looks great!

vin63 · 08-20-2019, 12:20 PM

Quote:

Originally Posted by 66-PMD-GMC

Looks great!

Thanks! Just in case anyone is curious about how the Auto Custom Carpets floor mats fit in our trucks, I received these yesterday. The fit is great, but I still may use a rubber mat to help keep the carpet clean while I'm still trying to finish up this version of the build. The cool under dash courtesy light kit is from Ron Francis Wiring and is a reverse solenoid set up that is wired through the updated RFW headlight switch with the dome light.

66-PMD-GMC · 08-20-2019, 12:26 PM

I found a nice black rubber mat.
Fit is fantastic..
No carpet ever.

**Android04** · 08-20-2019, 02:06 PM

Looks good.

vin63 · 09-04-2019, 10:50 AM

Quote:

Originally Posted by Android04

Looks good.

Thanks! I was able to do a couple of systems checks in preparation for getting this thing rolling again. Fuel system test and priming the oil system:

http://www.youtube.com/watch?v=AoimbyVTs1g

http://www.youtube.com/watch?v=G6TUdWORKPg

doobiebro · 09-11-2019, 11:34 AM

Love your build Vin63

Question, looking at one of your interior pics I see a hat holder bracket that mounts on your rear mirror. Where can I find one of those? thanx.

vin63 · 09-11-2019, 11:52 AM

Quote:

Originally Posted by doobiebro

Love your build Vin63

Question, looking at one of your interior pics I see a hat holder bracket that mounts on your rear mirror. Where can I find one of those? thanx.

Thanks! You can usually find them at horse tack/equestrian supply retailers (we have a horse), or custom/lowrider parts suppliers.

vin63 · 09-14-2019, 07:37 PM

After replacing my old (20+ years old and several Pontiac builds) Tilton Pontiac starter that finally gave up the ghost with an IMI Hi Torque Performance Products starter (anytime I have to buy a new starter, I buy an IMI Hi Torque one), I hit the ignition switch today and voila! The Poncho C10 is alive.

http://www.youtube.com/watch?v=4D2hfs0lWoI

http://www.youtube.com/watch?v=FIEahwxlHsE

66-PMD-GMC · 09-14-2019, 08:04 PM

Nice to see it alive...
What's the build time on it so far.. seems as if its been awhile..

vin63 · 09-14-2019, 08:12 PM

Thanks! Yep, it has been...11 years on the back burner. I built and ran a nitro Funny Car to set a Pontiac recored, restored a 63 Pontiac Tempest and Buick Riviera, and now a AA/Fuel Altered within that time frame. LOL

66-PMD-GMC · 09-14-2019, 11:21 PM

Nice work Vin.
Really hope to meet you soon, shake a hand and make a friend.
Steve's pontiac weekend is in 7 weeks. Hope you can make it..absolutely love your truck..
I'll be back on mine soon..

vin63 · 09-21-2019, 07:11 PM

Off the lift, out of my shop, and did a short test drive today. Friends coming over tomorrow to help me get the hood mounted.

http://www.youtube.com/watch?v=AP23Qq2iPKg

vin63 · 09-21-2019, 07:24 PM

A couple more pics my photog buddy took...

vin63 · 09-24-2019, 11:17 AM

The final touch - the hood is on and wired.

**Palf70Step** · 09-24-2019, 11:45 AM

Very nice!!

roll_the_dice · 09-24-2019, 11:53 AM

Congratulations! That is a huge accomplishment. I hope to be making similar videos next month. Enjoy it in good health! Enjoy the smile on your face every time you drive it!

jhrusk · 09-24-2019, 12:32 PM

Very nice.

66-PMD-GMC · 09-24-2019, 02:37 PM

Very cool
Hope you opt to make an appearance at the pontiac weekend.

vin63 · 09-24-2019, 02:43 PM

Thanks! A short clip as I'm heading out for a little spin around the neighborhood.

http://www.youtube.com/watch?v=xQWa0XbNK5M

88Stanger · 09-24-2019, 03:54 PM

Great build!!

**Android04** · 09-24-2019, 04:00 PM

Amazing attention to detail! Looks killer.

**youngrodder** · 09-24-2019, 04:19 PM

I like the dark green with the gold colored wheels. It provides great contrast...

Marc

07-24-2019, 03:09 PM	#251
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Intro and Some Photos of my '63 Project Got the AC hoses routed and installed, so I was able to re-mount the grill, hopefully for the last time. LOL Attached Images __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

07-24-2019, 03:23 PM	#252
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 377	Re: Intro and Some Photos of my '63 Project Looks exceptional

08-07-2019, 12:13 PM	#254
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Intro and Some Photos of my '63 Project Looks great! __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

08-20-2019, 12:26 PM	#256
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Intro and Some Photos of my '63 Project I found a nice black rubber mat. Fit is fantastic.. No carpet ever. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

08-20-2019, 02:06 PM	#257
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 377	Re: Intro and Some Photos of my '63 Project Looks good.

09-11-2019, 11:34 AM	#259
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 693	Re: Intro and Some Photos of my '63 Project Love your build Vin63 Question, looking at one of your interior pics I see a hat holder bracket that mounts on your rear mirror. Where can I find one of those? thanx. __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

09-14-2019, 08:04 PM	#262
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Intro and Some Photos of my '63 Project Nice to see it alive... What's the build time on it so far.. seems as if its been awhile.. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

09-14-2019, 08:12 PM	#263
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Intro and Some Photos of my '63 Project Thanks! Yep, it has been...11 years on the back burner. I built and ran a nitro Funny Car to set a Pontiac recored, restored a 63 Pontiac Tempest and Buick Riviera, and now a AA/Fuel Altered within that time frame. LOL __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes Last edited by vin63; 09-15-2019 at 09:25 PM. Reason: Typos

09-14-2019, 11:21 PM	#264
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Intro and Some Photos of my '63 Project Nice work Vin. Really hope to meet you soon, shake a hand and make a friend. Steve's pontiac weekend is in 7 weeks. Hope you can make it..absolutely love your truck.. I'll be back on mine soon.. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

09-21-2019, 07:24 PM	#266
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Intro and Some Photos of my '63 Project A couple more pics my photog buddy took... Attached Images __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

09-24-2019, 11:17 AM	#267
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Intro and Some Photos of my '63 Project The final touch - the hood is on and wired. Attached Images __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

09-24-2019, 11:45 AM	#268
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,091	Re: Intro and Some Photos of my '63 Project Very nice!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-24-2019, 11:53 AM	#269
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Intro and Some Photos of my '63 Project Congratulations! That is a huge accomplishment. I hope to be making similar videos next month. Enjoy it in good health! Enjoy the smile on your face every time you drive it! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

09-24-2019, 12:32 PM	#270
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: Intro and Some Photos of my '63 Project Very nice. __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

09-24-2019, 02:37 PM	#271
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Intro and Some Photos of my '63 Project Very cool Hope you opt to make an appearance at the pontiac weekend. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac



Register or Log In To remove these advertisements.

09-24-2019, 03:54 PM	#273
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,651	Re: Intro and Some Photos of my '63 Project Great build!!

09-24-2019, 04:00 PM	#274
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 377	Re: Intro and Some Photos of my '63 Project Amazing attention to detail! Looks killer.

09-24-2019, 04:19 PM	#275
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,773	Re: Intro and Some Photos of my '63 Project I like the dark green with the gold colored wheels. It provides great contrast... Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

Register or Log In To remove these advertisements.