No radio, heater, or power windows - The 1947 - Present Chevrolet & GMC Truck Message Board Network

85Silveradoin04 · 06-07-2004, 08:54 PM

Thank you google! I've been looking for a site like this for a while. Help is needed!

I replaced the steering column because the tilting was loose (pain to drive) which was donated from a junker 85 or 86. Not sure.

After plugging everything up, It startup and all lights, horn, blinkers, wipers and everything works. Except for the radio, heater, and power windows. I cant figure thus out, Everything looks right. I check fuses............they we fine. Any ideas?

Oh yeah. Cool site.

Russell · 06-07-2004, 10:39 PM

That'd be the switch at the base of your steering column

Put the one from the old column onto the new one, and it should be good to go again

85Silveradoin04 · 06-08-2004, 01:58 PM

Russell,
Could you be more specific as to what this switch is. I mean, I pulled the iginition switch, blinker switch, and wiper delay. There is also a thin back connector that goes from the column to the wiring harness as well. This is plugged in too. I'm beginning to think that this column came out of a truck without power windows. Could this be the case? Do you have a pick of what this switch should look like. That would be AWSOME. Thanks for the reply.

85Silveradoin04 · 06-08-2004, 08:11 PM

Are there differences in the ignition switch from power to manual windows? Everything buttoned up fine which is why this is weird, also all documentation I read referes to the switch being compatibile between years with the exception of the tilt, which both columns have.

85Silveradoin04 · 06-08-2004, 09:23 PM

Ok Ok Ok. Found it. Thanks to Russel for the tip. It was the ignition switch. Only becasue when I inserted the connector, one of the pins on the switch bent down . After adjusting it and reinstalling, it all work fine.

IF I EVER HAVE TO MESS WITH ONE OF THESE AGAIN IT WILL BE TOO SOON.

Russell · 06-08-2004, 09:26 PM

lol, sorry about that, I didn't really think to tell ya about what I meant, and I couldn't find my digital camera to get you a picture of it...

Glad ya got it going though!

Russell · 06-08-2004, 09:32 PM

Hey, by the way, welcome to the forum!

You stumbled across by far one of the best forums out there, over 10 000 members, with thousands of posts every night

This truely is the best place to get help for your truck! The guys here can save you thousands of dollars by showing you how to do stuff yourself, and can be best buds with ya, or be a shoulder to cry on. We really are like a big family here

85Silveradoin04 · 06-08-2004, 09:34 PM

No problem. Glad its done too. It really sucked when I got to work only to find out the Windows would budge and with the forcast showing heavy showers late morning........

85Silveradoin04 · 06-08-2004, 09:36 PM

Quote:

Originally Posted by Russell

Hey, by the way, welcome to the forum!

You stumbled across by far one of the best forums out there, over 10 000 members, with thousands of posts every night

This truely is the best place to get help for your truck! The guys here can save you thousands of dollars by showing you how to do stuff yourself, and can be best buds with ya, or be a shoulder to cry on. We really are like a big family here

Looks great and glad to be a part of it. Thanks to you!

Russell · 06-08-2004, 09:49 PM

Any time! Plus, I just found my camera, so now I can take pics of stuff again, I was missing that thing...

06-07-2004, 08:54 PM	#1
85Silveradoin04 Registered User Join Date: Jun 2004 Posts: 64	No radio, heater, or power windows Thank you google! I've been looking for a site like this for a while. Help is needed! I replaced the steering column because the tilting was loose (pain to drive) which was donated from a junker 85 or 86. Not sure. After plugging everything up, It startup and all lights, horn, blinkers, wipers and everything works. Except for the radio, heater, and power windows. I cant figure thus out, Everything looks right. I check fuses............they we fine. Any ideas? Oh yeah. Cool site.

06-07-2004, 10:39 PM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	That'd be the switch at the base of your steering column Put the one from the old column onto the new one, and it should be good to go again __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

06-08-2004, 09:26 PM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	lol, sorry about that, I didn't really think to tell ya about what I meant, and I couldn't find my digital camera to get you a picture of it... Glad ya got it going though! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

06-08-2004, 09:32 PM	#7
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Hey, by the way, welcome to the forum! You stumbled across by far one of the best forums out there, over 10 000 members, with thousands of posts every night This truely is the best place to get help for your truck! The guys here can save you thousands of dollars by showing you how to do stuff yourself, and can be best buds with ya, or be a shoulder to cry on. We really are like a big family here __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

06-08-2004, 09:49 PM	#10
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Any time! Plus, I just found my camera, so now I can take pics of stuff again, I was missing that thing... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

06-08-2004, 01:58 PM	#3
85Silveradoin04 Registered User Join Date: Jun 2004 Posts: 64	Russell, Could you be more specific as to what this switch is. I mean, I pulled the iginition switch, blinker switch, and wiper delay. There is also a thin back connector that goes from the column to the wiring harness as well. This is plugged in too. I'm beginning to think that this column came out of a truck without power windows. Could this be the case? Do you have a pick of what this switch should look like. That would be AWSOME. Thanks for the reply.

06-08-2004, 08:11 PM	#4
85Silveradoin04 Registered User Join Date: Jun 2004 Posts: 64	Are there differences in the ignition switch from power to manual windows? Everything buttoned up fine which is why this is weird, also all documentation I read referes to the switch being compatibile between years with the exception of the tilt, which both columns have.

06-08-2004, 09:23 PM	#5
85Silveradoin04 Registered User Join Date: Jun 2004 Posts: 64	Ok Ok Ok. Found it. Thanks to Russel for the tip. It was the ignition switch. Only becasue when I inserted the connector, one of the pins on the switch bent down . After adjusting it and reinstalling, it all work fine. IF I EVER HAVE TO MESS WITH ONE OF THESE AGAIN IT WILL BE TOO SOON.

06-08-2004, 09:34 PM	#8
85Silveradoin04 Registered User Join Date: Jun 2004 Posts: 64	No problem. Glad its done too. It really sucked when I got to work only to find out the Windows would budge and with the forcast showing heavy showers late morning........



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.