house cleaning (newbie)

[dark-star]

sorting thru the stuff we have out at the ranch, send me an e-mail if serious interested or need pics (does take me a day or so etc..) all parts are in fargo N.D.

1984 1/2 2wd, some usable parts, good trans, cab is junk but has some usable stuff there.

1982 1/2 4wd, solid floors needs resto, bad tranny (have a good one that i drove home this week to go with truck) would make a good truck as it has a gm crate 350 with about 30k on it , no smoke no rattles tight motor, you take truck + parts first 1,200 i r&r tranny and you drive home 1,550, title is temporarily lost but am working on getting one again! (have pics)

1984 1/2 4wd, my daily driver, older resto (6 years) motor is about 1 1/2 years old with only about 10k, keith black pistons low comp (8.5), stage 2 r.v. cam and harland sharps, good canidate for a blower maybe!? body has gm sheetmetal replaced and was a solid western N.D. truck so there is O floor/underbody rust, some bubble rust starting to show again in a couple of places but A+ for a quick restore and drive. truck runs 3.42's and a th-350 heavy clutch (no r-4 headaches) truck was built to pull a race car i no longer have so wife says go away old yeller so we can start on the new garage queen (2wd shortie fleetside). no counting time (we all know that) i have about 6K in new stuff on it in the last 2 years would like a serious offer that i can live with and drive it away. (have pics)

several burbs, 197x 3/4,1980 1/2, 1988 1/2,1989 1/2, lots o parts on them yet e-mail with wants. also a couple of 350 4 bolts and a 400 sb. treat me nice and get what you need.

also a 1984? 1 ton dually 2wd that needs resto but has a good 454 running core th-400.

email me private and we can go from there, thanks all!

[454malibuwagon]

was wondering what shape the 88 and 89 burbs are in, i am looking for the front clip, all four doors and posibly some interior pieces for my crew cab dually, could you send me some pics and prices as i can drive up there and get them if they are what i am looking for, Thanks

[bigblock73]

I can't find your E-mail addy, so here it goes...

Do you have a 73-8? Chevy/GMC truck manual trans tilt column and matching intermediate shaft? I need one out of a truck where the wipers controls are on the dash, not the column.

Thanks.

[87Silvy]

What kinda shape are the rear bumpers in from the Burbs?

[78SilveradoSWB]

By chance did any of the burbs have bucket seats? Looking for the seat belt piece for both driver & passenger that has the female buckle.

[soleeagle]

I am interested in the 89 burb core support if it is a dual side by side headlight setup.

[Liz]

dark-star your email seems to be turned off on your profile please post prices and location with your items. Thanks

[79BIG10]

How about tan door panels with no power to fit a 79?

[rich-white]

Power mirrors on either burb?

[GMC1tondually4dr]

Dark-Star and 454Malibuwagon, I'm in Minneapolis and might need some stuff. I've got a 91 Sub 4x4 and a 86 CC Dually 2x4( converting to 88-91 front end style). I'm in the middle, have access to a car hauling trailer maybe we can work somthing out. 454Malibuwagon, where in IA are you?

[454malibuwagon]

gmc1tondually4dr i am the northwest corner of iowa,(about five hours for minneapolis) i will be there in july for the car craft summer nationals, i have an 82 crew cab dually and i want to convert mine to 88 to 91 front end also along with fuel injection,(all ready have the fuel injected 454 and all the wireing, ect.) mainly need body parts to finish it, any help on parts would be great