That's why you don't do the friction plates out of the diff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Markus_E · 12-31-2019, 10:38 AM

It's a few weeks ago. Maybe it helps some other people. One of the owners bevor pulled out the friction plates out of the diff.
It runs like a open diff, but not very long. But the time comes, when one of the spider gears moves in the diff carrier and the c clip dropes out.
I had a lot of luck. I drove very slowly at this time.
Now i got a good Eaton limited slip in my Truck. And this will never happen.

Trucknut57 · 12-31-2019, 11:06 AM

Sorry that happened to you but that helped me make up my mind about which differential to use.

Thanks.

**kwmech** · 12-31-2019, 11:24 AM

If ya have the money, put a tru-trac in it and don't ever worry about clutches again

Killer Bee · 12-31-2019, 01:25 PM

nice truck, glad you kept it under control and didn't have an accident!

but I have to ask out of curiosity, what's going on with the exhaust?

looks like a 4-5" single pipe under the cross member to a v-band, wye pipe to two very large mufflers??

kind of unusual from my experience, was this done for a purpose?

Markus_E · 12-31-2019, 03:37 PM

Thats for the German registration in case of the ls swap. Its not that easy like in the US

notsolo · 12-31-2019, 03:51 PM

Nice truck...good save...Yikes on the exhaust requirements...in the US that 1 big pipe would turn and go strait up behind the cab on a step side...no muffler...Hillbilly deluxe.

yuccales · 12-31-2019, 06:41 PM

Man you got so lucky, no wreck or body damage. Good looking truck! How quiet is your exhaust?

Markus_E · 12-31-2019, 07:51 PM

It's really quiet. A bit louder than an original exhaust . I like it, because i drive the truck every day.

12-31-2019, 10:38 AM	#1
Markus_E Registered User Join Date: Jun 2019 Location: Schlaitdorf Germany Posts: 22	That's why you don't do the friction plates out of the diff It's a few weeks ago. Maybe it helps some other people. One of the owners bevor pulled out the friction plates out of the diff. It runs like a open diff, but not very long. But the time comes, when one of the spider gears moves in the diff carrier and the c clip dropes out. I had a lot of luck. I drove very slowly at this time. Now i got a good Eaton limited slip in my Truck. And this will never happen.

12-31-2019, 11:06 AM	#2
Trucknut57 Registered User Join Date: Aug 2010 Location: Jennings, OK Posts: 323	Re: That's why you don't do the friction plates out of the diff Sorry that happened to you but that helped me make up my mind about which differential to use. Thanks. __________________ Somehow, the idiots survive despite their best efforts to kill themselves. - dcozzi

12-31-2019, 11:24 AM	#3
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,724	Re: That's why you don't do the friction plates out of the diff If ya have the money, put a tru-trac in it and don't ever worry about clutches again

12-31-2019, 01:25 PM	#4
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,828	Re: That's why you don't do the friction plates out of the diff nice truck, glad you kept it under control and didn't have an accident! but I have to ask out of curiosity, what's going on with the exhaust? looks like a 4-5" single pipe under the cross member to a v-band, wye pipe to two very large mufflers?? kind of unusual from my experience, was this done for a purpose? __________________ *I started out with nothing - and I still have most of it*

12-31-2019, 03:37 PM	#5
Markus_E Registered User Join Date: Jun 2019 Location: Schlaitdorf Germany Posts: 22	Re: That's why you don't do the friction plates out of the diff Thats for the German registration in case of the ls swap. Its not that easy like in the US

12-31-2019, 03:51 PM	#6
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,485	Re: That's why you don't do the friction plates out of the diff Nice truck...good save...Yikes on the exhaust requirements...in the US that 1 big pipe would turn and go strait up behind the cab on a step side...no muffler...Hillbilly deluxe. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605 Last edited by notsolo; 01-04-2020 at 08:24 AM.

12-31-2019, 06:41 PM	#7
yuccales Registered User Join Date: May 2011 Location: Northern Calif. Posts: 3,825	Re: That's why you don't do the friction plates out of the diff Man you got so lucky, no wreck or body damage. Good looking truck! How quiet is your exhaust?

12-31-2019, 07:51 PM	#8
Markus_E Registered User Join Date: Jun 2019 Location: Schlaitdorf Germany Posts: 22	Re: That's why you don't do the friction plates out of the diff It's really quiet. A bit louder than an original exhaust . I like it, because i drive the truck every day.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.