ANybody running WILWOOD #140-10094 complete rear disc kit ?

[Twisted71c10]

trying to determine which wilwood braided hoses to use ?

[bigmac73]

I am give me a few mins and i will look up the hoses i used, I know i went with a 12 inch line after i ran new brake lines to give me a little extra play when removing the calipers for pad replacements

[bigmac73]

wildwood 220-7686 from summit and actually i forgot they are 16inches
I also had to order some weld on tabs and clips to hold the adapter fittings to the steel lines, I just tached them to the axle tubes. i do not know if you need them or not

[bigmac73]

do you have the flare adapter for the hard lines?

[Twisted71c10]

Originally Posted by bigmac73

do you have the flare adapter for the hard lines?

no

[bigmac73]

Hope this helps,. if you can not tach weld the brake line tab on to the axle tube. you might find one that you can clamp on with a big hose clamp.
but the weld on one is the best so everything is stable on the road and will not loosen up or crack a line from stress or movement

and just an FYI i have not gotten mine on the road yet as i redoing all lines and my cab is stripped for body work

[bigmac73]

the rear brake lines I got from Napa and they are the coated ones I just bent them the best i could along the tubes. I ordered whole set from inline tube but they did not really match up ( will use what i can) , so i got the generic ones from Napa in the length i needed

[bigmac73]

if you are trying to go straight to the rear stock brake lines, They might be too long
mine were rotted so i just replaced , i don't know if you can hook straight to the stock lines depending on the condition and length

[bigmac73]

Just following up any luck with your swap