Drain holes in a Blazer Floor? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phlegm · 05-13-2020, 01:49 PM

Hi guys, as told on another post. I have a line on a 72 blazer thats currently off frame and being stored in a shop. I am working on budgets and selling it to the boss. I have always said if I did one of these I would spray thick bedliner on the floor and put drain holes in the low spots so if I am topless and get caught in a down pour i am not bailing out the truck. Is this a normal thing? I searched the site with some keywords but didnt see an obvious thread, plenty on bed liner being thick but not so much on drain holes.

**BIG ORANGE** · 05-15-2020, 10:45 AM

That's a good question, I'm doing my blazer a roadster style with tailgate welded shut no top. I guess the corner's of the bed would be fine with it being a fair weather vehicle.

OldCreek · 05-17-2020, 08:52 PM

Quote:

Originally Posted by phlegm

Hi guys, as told on another post. I have a line on a 72 blazer thats currently off frame and being stored in a shop. I am working on budgets and selling it to the boss. I have always said if I did one of these I would spray thick bedliner on the floor and put drain holes in the low spots so if I am topless and get caught in a down pour i am not bailing out the truck. Is this a normal thing? I searched the site with some keywords but didnt see an obvious thread, plenty on bed liner being thick but not so much on drain holes.

I don’t think that’s necessary. Water will flow out the tailgate and the rockers. Even with heavy bed liner, I think there would be decent flow through the rockers... the outer to inner rocker interface aren’t welded shut. Even with diy bedliner, water flows out through my rockers no problem. And, there are holes in the bed at the “B” pillar where everything comes together.

phlegm · 05-18-2020, 11:21 AM

Quote:

Originally Posted by OldCreek

I don’t think that’s necessary. Water will flow out the tailgate and the rockers. Even with heavy bed liner, I think there would be decent flow through the rockers... the outer to inner rocker interface aren’t welded shut. Even with diy bedliner, water flows out through my rockers no problem. And, there are holes in the bed at the “B” pillar where everything comes together.

The voice of experience! thanks!

OldCreek · 05-23-2020, 11:22 PM

Driver's side B pillar floor. You can see the hole and seam.

(For the curious.)

05-13-2020, 01:49 PM	#1
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Drain holes in a Blazer Floor? Hi guys, as told on another post. I have a line on a 72 blazer thats currently off frame and being stored in a shop. I am working on budgets and selling it to the boss. I have always said if I did one of these I would spray thick bedliner on the floor and put drain holes in the low spots so if I am topless and get caught in a down pour i am not bailing out the truck. Is this a normal thing? I searched the site with some keywords but didnt see an obvious thread, plenty on bed liner being thick but not so much on drain holes. __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was

05-15-2020, 10:45 AM	#2
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	Re: Drain holes in a Blazer Floor? That's a good question, I'm doing my blazer a roadster style with tailgate welded shut no top. I guess the corner's of the bed would be fine with it being a fair weather vehicle. __________________ Things happen for a reason!

05-23-2020, 11:22 PM	#5
OldCreek Registered User Join Date: Jan 2007 Location: Central Coast California Posts: 1,026	Re: Drain holes in a Blazer Floor? Driver's side B pillar floor. You can see the hole and seam. (For the curious.) Attached Images __________________ 1972 K20 Suburban 5.7/700r4/NP205 Dana 44/H052 Sold 1972 C10 5.3L/4L60E 12bolt 5Lug - Sold 1971 K5 Blazer 6.0L LQ9 4L60E NP205 Dana 44/H052!!! 1970 K3500 1ton CrewCab 8.1L/Allison1000/NP205 Dana 60/14B!!!! - Sold 1984 K10 SWB 7.4L/4L80e/NP208 Corp 10/12 bolt Sold 1988 V30 CCLB 7.4L/TH400/NP205/Dana 60/Dana 70/3.73!!! (Sold) 2003 K2500HD 8.1/Allison1000/NP263



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.