![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,335
|
1974 C20 & a couple questions
So I ended up picking up this today. Can't say I've seen many of these around. C20 Cheyenne Super, stepside, with a 454. Color is supposed to be Desert Sand with a Saddle interior. Still has the original engine and it runs pretty good.
As I'm sure is common, needs patches in the front and rear section of each fender. How are the repop patches? Do they suck like most patches for the 67-72 patches do? Also, it needs new hood hinges. How are the repop hinges? Good, bad? Once I get some minor body work done on it, including the aforementioned patches, I'm going to get some paint on it. While I'm not sure how much I love the Desert Sand, it's a heck of a lot more work to prep for a different color, so I think I'm just going to stick with it. This is my work/hauling truck, so I don't need another project. Already sourced some correct 16" wheels thanks to t.korniek, so those will be going on soon. I'll try and get a pic of the SPID tomorrow. Has AC, aux tank, power steering and brakes, etc... Thanks for the help. |
![]() |
![]() |
![]() |
#2 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,844
|
Re: 1974 C20 & a couple questions
Nice looking truck. LWB stepsides are definitely not around much. I don't think I have every seen one with a big block.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: May 2015
Location: Montana
Posts: 3,696
|
Re: 1974 C20 & a couple questions
Quote:
Maybe the engine or the bed has been swapped ???
__________________
Current/past Chevy/GMC trucks: 1958 Chevy C-60; 1965 GMC C-50; 1965 Chevy C-10; 1971 Chevy K-10; 1973 Chevy K-20; 1976 GMC C-20; 1977 Chevy C-10 Suburban; 1980 Chevy K-10; 1989 Chevy K1500; 1991 GMC V1500 Suburban; 2016 Chevy K2500 HD Other vehicles: 1988 Jeep XJ; 2011 Toyota 4Runner |
|
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,335
|
Re: 1974 C20 & a couple questions
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,962
|
Re: 1974 C20 & a couple questions
Nice find - not many long step Supers running around. I like the desert sand - here's a pic you might like
![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,335
|
Re: 1974 C20 & a couple questions
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Nov 2006
Location: Amador County, Ca.
Posts: 229
|
Re: 1974 C20 & a couple questions
Cool truck. I think that truck popped up on my FB market place. Picture of it was on a car trailer. But being from Northern California, I was thinking it was in California... Whether its the same one or not, I really like the long step bed!!
__________________
1995 GMC 4x4 1/2 ton 1999 Jeep Wrangler w/ 33's 68 camaro 350/350 1987 Chevy 3/4 ton 4x4 Suzuki DRZ 400s Dual Sport 1971 chevy long bed 2x4 194? Dodge 2.5 ton 1980 Chevy Cheyenne 4x4 1/2 ton I6/sm455 1989 Chevy V30 crewcab dually 454/TH400 |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,335
|
Re: 1974 C20 & a couple questions
As you're in CA, there's a good chance it could have popped up on your feed. I never saw a pic of it on a trailer, but maybe it was at some point. Think it's a life-long AZ truck, as it has no mention or sign of any smog equipment. Fremont built.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2015
Location: Montana
Posts: 3,696
|
Re: 1974 C20 & a couple questions
Nice thing about the Old Days was that you could order virtually any combination of options.
I wanted to get a stepside K/20 with a 292 six and four speed, but it was going to cost so much more than something off the lot that I just gave in and bought the K/10. Ended up selling it for capital a couple years later ![]()
__________________
Current/past Chevy/GMC trucks: 1958 Chevy C-60; 1965 GMC C-50; 1965 Chevy C-10; 1971 Chevy K-10; 1973 Chevy K-20; 1976 GMC C-20; 1977 Chevy C-10 Suburban; 1980 Chevy K-10; 1989 Chevy K1500; 1991 GMC V1500 Suburban; 2016 Chevy K2500 HD Other vehicles: 1988 Jeep XJ; 2011 Toyota 4Runner |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,335
|
Re: 1974 C20 & a couple questions
Here’s the SPID as promised.
|
![]() |
![]() |
![]() |
#11 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,844
|
Re: 1974 C20 & a couple questions
As nice as that is, I'd almost bet it was setup for a in bed camper. Sweet ride none the less.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,335
|
Re: 1974 C20 & a couple questions
That would explain the mostly decent original bed wood and the previously inexplicable GMC tailgate that now leaves me looking for a Chevy tailgate at a reasonable price. For some reason people with original Chevy stepside tailgates think they’re made of gold.
Oddly tho, it’s not a Custom Camper model. |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2001
Location: Lincoln, Nebraska
Posts: 2,145
|
Re: 1974 C20 & a couple questions
Or it was a custom ordered out by a truck utility sales company, or a farmer or contractor then they would custom convert the truck by removing the step/rear fenders and install matching painted utility bin/ door boxsides like an OBECO or Omaha brand. Probably pulled a bumper hitch trailer too with the 454 automatic.
Some would even have sliding bed covers to keep tools and equipment or product in the bed and their box bins for more storage on sides. You used to see a lot of new take off tailgates, stepside fenders, and long steps for sale back in the 70's and 80's from this conversion of company and farm trucks and sometimes take off tailgates from tailgate lifts.
__________________
'66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 05-27-2020 at 05:55 AM. |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Oct 2015
Location: PNW
Posts: 3,587
|
Re: 1974 C20 & a couple questions
I think that thing looks pretty neat as it sits! I like your idea of going back to original wheels and hubcaps. After that I'd be inclined to clean it up, and get it mechanically sound and just patch what's needed. Not trying to talk you out of what you want to do, but that rough and ready, wear-and-tear look works for me.
|
![]() |
![]() |
![]() |
#15 | |
Registered User
![]() Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,335
|
Re: 1974 C20 & a couple questions
Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|