KS WTB: Clutch Rod 6-Cyl - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Harleys 4 You** · 06-03-2020, 10:38 PM

I want to buy a clutch rod that goes from the z-bar to the clutch fork for a 6-cylinder, 250 engine. If anyone has one that they're willing to part with, send me a pm.
Thanks!

**1rippen6** · 06-04-2020, 04:20 PM

I have one off a 6 cyl. 4x4 but don't have a clue if they are the same. Do you have a measurement.

**NGN** · 06-04-2020, 05:15 PM

I measured the one I have at 13 3/8, it came off a 67 three speed. See how it works out with 1rippen6, it's not going anywhere. I said to myself what the heck, so I just measure the one in the V8 for the fun of it, that looks to be 10 inches.
NGN
NICK

**1rippen6** · 06-04-2020, 05:25 PM

I was just trying to help, no big deal here.

**Grumpy old man** · 06-04-2020, 05:43 PM

this might help .

**NGN** · 06-04-2020, 05:43 PM

Hello again, 1rippen6, by no means was I trying to move in on your sale, just mentioning the length, hope it works out for you guys but if I can help with the part and it doesn't work out I'm here with it.
Take care fellas.

**Harleys 4 You** · 06-04-2020, 08:21 PM

It is about 13 1/2

**1rippen6** · 06-04-2020, 08:24 PM

Quote:

Originally Posted by NGN

Hello again, 1rippen6, by no means was I trying to move in on your sale, just mentioning the length, hope it works out for you guys but if I can help with the part and it doesn't work out I'm here with it.
Take care fellas.

Wasn't complaining, I wasn't sure if mine was correct, what I meant was if you know yours is correct help him out, lol.

**1rippen6** · 06-04-2020, 08:24 PM

Quote:

Originally Posted by Harleys 4 You

It is about 13 1/2

I can measure mine tomorrow but don't think it was that long.

**1rippen6** · 06-05-2020, 11:15 AM

Both the ones I have are around 10 inches

**Harleys 4 You** · 06-06-2020, 09:48 AM

NGN, I still need a clutch linkage. What do you want for yours?

1rippen6, those aren't the right ones. I need a 13 3/8.

**NGN** · 06-06-2020, 11:44 AM

Hello Harleys 4 You, yes how twenty bucks with both end, (that's the part that rest on the fork and the adjuster nut set on the z-bar up, plus shipping.
NGN
NICK

**Harleys 4 You** · 06-06-2020, 12:13 PM

I'll pm you.
Thanks!

06-03-2020, 10:38 PM	#1
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	WTB: Clutch Rod 6-Cyl I want to buy a clutch rod that goes from the z-bar to the clutch fork for a 6-cylinder, 250 engine. If anyone has one that they're willing to part with, send me a pm. Thanks!

06-04-2020, 04:20 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: WTB: Clutch Rod 6-Cyl I have one off a 6 cyl. 4x4 but don't have a clue if they are the same. Do you have a measurement.

06-04-2020, 05:15 PM	#3
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: WTB: Clutch Rod 6-Cyl I measured the one I have at 13 3/8, it came off a 67 three speed. See how it works out with 1rippen6, it's not going anywhere. I said to myself what the heck, so I just measure the one in the V8 for the fun of it, that looks to be 10 inches. NGN NICK Last edited by NGN; 06-04-2020 at 05:24 PM.

06-04-2020, 05:25 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: WTB: Clutch Rod 6-Cyl I was just trying to help, no big deal here.

06-04-2020, 05:43 PM	#5
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB: Clutch Rod 6-Cyl this might help . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

06-04-2020, 05:43 PM	#6
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: WTB: Clutch Rod 6-Cyl Hello again, 1rippen6, by no means was I trying to move in on your sale, just mentioning the length, hope it works out for you guys but if I can help with the part and it doesn't work out I'm here with it. Take care fellas.

06-04-2020, 08:21 PM	#7
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: WTB: Clutch Rod 6-Cyl It is about 13 1/2

06-05-2020, 11:15 AM	#10
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: WTB: Clutch Rod 6-Cyl Both the ones I have are around 10 inches Attached Images

06-06-2020, 09:48 AM	#11
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: WTB: Clutch Rod 6-Cyl NGN, I still need a clutch linkage. What do you want for yours? 1rippen6, those aren't the right ones. I need a 13 3/8.

06-06-2020, 11:44 AM	#12
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: WTB: Clutch Rod 6-Cyl Hello Harleys 4 You, yes how twenty bucks with both end, (that's the part that rest on the fork and the adjuster nut set on the z-bar up, plus shipping. NGN NICK

06-06-2020, 12:13 PM	#13
Harleys 4 You Senior Member Join Date: Jul 2011 Location: Wichita, KS Posts: 520	Re: WTB: Clutch Rod 6-Cyl I'll pm you. Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.