![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Active Member
![]() Join Date: Aug 2012
Location: Central Illinois
Posts: 103
|
Mounting Vintage Air Unit Higher Under Dash......
The Gen IV Vintage Air unit is probably the best unit out there. I intend on using one in our current build. My only complaint, is how low it sits on the firewall. After viewing many pictures of installed units, I think that a unit could be mounted higher which would make for a cleaner look. I know the opening for the AC and heater lines would have to be made larger, but I don't know of anything else that would prevent mounting the unit as much as 2 inches higher.
What are your thoughts on this idea? Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Mounting Vintage Air Unit Higher Under Dash......
I never use the manufacturers suggestions on mounting it. If you fill all the holes first you can start from scratch.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,853
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Check out Restomod versions. Not sure it moves up, but they use a cover that may do it. Only seen on Cuttless at shop. Just tossing it out there.
https://www.restomodair.com/product-...RoCKywQAvD_BwE
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Mounting Vintage Air Unit Higher Under Dash......
I just installed mine recently. I am not a huge fan of how it hangs down in the cab, but I didn't want to mess with the firewall to have the opening differently or to reroute the plumbing to come out differently.
Probably could come up 1 1/2" to 2"....or you could do a builders series A/C and make it even a smaller footprint. This is my Gen IV installed under the dash. Last edited by roll_the_dice; 06-09-2020 at 09:03 PM. |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Sep 2014
Location: Valparaiso, IN
Posts: 300
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Quote:
|
|
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Quote:
I "think" if you rerouted the plumbing on the Gen IV or welded the opening shut and made new holes it could be moved up maybe 2". Without measuring I am not sure how close the servos are to the underside of the cowl...that is the determining factor of moving the Gen IV up, IMO. I can get some measurements tomorrow if you want. |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2014
Location: Valparaiso, IN
Posts: 300
|
Re: Mounting Vintage Air Unit Higher Under Dash......
roll_the_dice, More pictures are always good. Thanks.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2008
Location: Union City CA
Posts: 79
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Mounted my Vintage Air as high as I could.
Jim ![]() |
![]() |
![]() |
![]() |
#9 |
Active Member
![]() Join Date: Aug 2012
Location: Central Illinois
Posts: 103
|
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Is that the Gen IV? Also hard to tell, but did you move it over more to the center of the dash? Can you show pictures from the firewall side?
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Here are some pictures I just took with the Gen IV in the OEM location.
The fresh air vent is approximately 2" from the side of the unit. So It may be able to be cracked, but not opened. Also, to the right of the unit where the underside of the cowl rolls down to the side panel, there is about 1 1/2" before it would hit plumbing that is a hard line on the unit. I think to move the Gen IV up a maximum of about 1 3/4" or more, it would have to be moved siginificantly away from the OEM location and plumbing rerouted or at least get creative. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,608
|
Re: Mounting Vintage Air Unit Higher Under Dash......
I lightened the photo so you can see it better. I know there in a detailed thread on here where someone did this.
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2018
Location: NorCal
Posts: 45
|
Re: Mounting Vintage Air Unit Higher Under Dash......
FWIW, I mounted mine as VA recommends and was able to flip the control lever on the pass. side air vent flap still allowing for full operation of the fresh air intake. I also built a cover for the unit as it is quite visually unappealing. The cover helps a little, not completely satisfied, but.....
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Feb 2013
Location: central California
Posts: 2,735
|
Re: Mounting Vintage Air Unit Higher Under Dash......
I like that cover and have previously considered something similar. Let me ask you, does it impede the air flow to the fan? Also, does it help muffle the noise of the fan? I think they are kinda loud.
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Apr 2018
Location: NorCal
Posts: 45
|
Re: Mounting Vintage Air Unit Higher Under Dash......
I don't think airflow is compromised. The back of the cover is open and it has about an inch between the front of the cover and the fan housing. It was may bc of the noise and it has made a huge improvement. I'd definitely recommend one if yours is loud. I used construction paper to mock up then used foam board for final. That made it firm enough but still light weight.
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Mar 2016
Location: Manlius, NY
Posts: 1,698
|
Re: Mounting Vintage Air Unit Higher Under Dash......
The optical illusion makes it blend into the firewall well in the picture. Is the cover 3 panels...left, right and center?
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Apr 2018
Location: NorCal
Posts: 45
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Yes. Front, left, right, plus the lower all extend toward the firewall and terminate just short of covering the entire unit.
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Feb 2013
Location: central California
Posts: 2,735
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Foam board for hobbies or for home construction? Also please, did you just glue the carpet to it with spray adhesive and did you attach the whole works to the A/C unit with studs and washers? I hope you don't mind me stealing your design. I won't however, steal the credit for it when people ask about it.
|
![]() |
![]() |
![]() |
#19 | |
Registered User
Join Date: Nov 2008
Location: Union City CA
Posts: 79
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Quote:
Jim ![]() |
|
![]() |
![]() |
![]() |
#20 | |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Quote:
![]()
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
![]() |
![]() |
![]() |
#21 | |
Registered User
Join Date: Apr 2018
Location: NorCal
Posts: 45
|
Re: Mounting Vintage Air Unit Higher Under Dash......
Quote:
|
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 625
|
Re: Mounting Vintage Air Unit Higher Under Dash......
We are right in the middle of this on our build. Mounted it as high as it will go. With our added under dash panel we built it hides it pretty well.
__________________
Our 1965 GMC big block pro mod build http://67-72chevytrucks.com/vboard/s...d.php?t=746098 |
![]() |
![]() |
![]() |
Bookmarks |
|
|